Honeywell AWM5000 Series Microbridge Mass Airflow Sensors are designed to measure the mass of air or other gas flowing through a given sensor's inlet and outlet ports. They operate on the principle that airflow directed across the surface of a sensing element causes heat transfer that corresponds to airflow.
These sensors feature a maximum current rating of 10 mA sinking and 20 mA sourcing and require a latch detente connector for electrical connection. They can be mounted with 6-32 screws and have a recommended mounting torque of 1.1 N-m for steel screws or 0.75 N-m for brass screws.
Honeywell AWM5000 Series Microbridge Mass Airflow Sensors are designed to measure the mass of air or other gas flowing through a given sensor's inlet and outlet ports. They operate on the principle that airflow directed across the surface of a sensing element causes heat transfer that corresponds to airflow.
These sensors feature a maximum current rating of 10 mA sinking and 20 mA sourcing and require a latch detente connector for electrical connection. They can be mounted with 6-32 screws and have a recommended mounting torque of 1.1 N-m for steel screws or 0.75 N-m for brass screws.
Honeywell AWM5000 Series Microbridge Mass Airflow Sensors are designed to measure the mass of air or other gas flowing through a given sensor's inlet and outlet ports. They operate on the principle that airflow directed across the surface of a sensing element causes heat transfer that corresponds to airflow.
These sensors feature a maximum current rating of 10 mA sinking and 20 mA sourcing and require a latch detente connector for electrical connection. They can be mounted with 6-32 screws and have a recommended mounting torque of 1.1 N-m for steel screws or 0.75 N-m for brass screws.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI