Minka Lavery 3296-613 Installation guide

Brand: Minka Lavery

Model: 3296-613

Type: Installation guide

Minka Lavery 3296-613 is a versatile light fixture that offers easy installation and customization options. With its adjustable circular strap and multiple mounting screws, it can be securely attached to any ceiling outlet box. The fixture supports the use of light bulbs (not included) up to the specified wattage rating, providing ample illumination for various spaces. Its classic design makes it suitable for both traditional and contemporary settings.

INSTALLATION INSTRUCTIONS

Item #3296-613 (New. 11/18/2015)

READ AND SAVE THESE INSTRUCTIONS

W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Fig. 1

Fig. 2

ASSEMBLING THE FIXTURE (Fig.1)

1. Shut off the power at the fuse box or circuit breaker. If

necessary, remove the old fixture, including the

mounting hardware.

2. Carefully unpack the new fixture and lay out all the

parts on a clear area. Take care not to lose any parts

necessary for installation.

3. Thread Screw (A) into the pre-drilled holes in the

circular strap (B) spaced the same distance apart as

the holes in the back-plate and secure with Hex Nut

(C).

4. Attach the circular strap (B) to the outlet box using

the Mounting screws (D). The side of the mounting

plate marked “GND” must face out.

CONNECTING THE WIRES (Fig. 2)

5. At this point, connect the electrical wire as shown in

figure 2, making sure that all wire connectors are

secured. If your outlet has a ground wire (green or

bare copper), connect the fixtures ground wire to it.

Otherwise, connect the fixture ground wire directly to

the circular strap and secure with the green screw

provided. After wires are connected, tuck them

carefully into the ceiling junction box.

FINISHING THE INSTALLATION (Fig. 1)

6. Place canopy (E) over the screw (A) and fasten with

knurled knob (F).

7. Place the metal tubes (H) over the socket (I) of the

fixture body.

8. Install the light bulb(s) (not included) in accordance

with the fixture’s specifications. (DO NOT EXCEED

THE MAXIMUM WATTAGE RATING!) (NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!).

Your installation is now complete. Return power to

the junction box and test the fixture.

Note: Illustration (Fig. 1) on this manual is for

installation purposes only. It may or may not be

identical to the fixture purchased.

LA-2524E

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

Green

(Ground)

Set

022

- Circular strap

- Ground screw

- Mounting Screw*2

Minka Lavery 3296-613 Installation guide

Minka Lavery 3296-613 Installation guide

Minka Lavery 3296-613 Installation guide

Related papers