Atdec TH-WH-PJ-FM/TAA Specification

Atdec
Brand
Atdec
Model
TH-WH-PJ-FM/TAA
Category
Projector mounts
Type
Specification
3
8
Extension
Bracket
Ceiling
Plate
127 mm
(5”)
Maximum distance bracket
can be secured from top
of projector = 10mm ( ”)
+/- 40º
Pitch
+/- 20º
Roll
TM
Dimensions
Technical Specifications
Projector Ceiling Mount | Flush
-
Projector
NOTE: 4 sets of Extension Bracket lengths are
included to suit most mounting configurations.
Any combination of these brackets may be used.
2x100mm (4”)
2x50mm (2”)
2x75mm (3”)
Minimum reach = 65mm (2 ”)
(from centre of bracket)
9
16
65mm
(2 “)
9
16
200mm
(7 “)
7
Maximum reach = 200mm (7 ”)
8
(from centre of bracket)
7
8
2x150mm (5 ”)
7
8
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 09.03.11 ©
Projector mounting screws and washers included:
- M2.5x15 (x4)- M3x15 / M3x20 (x4 each)
- M4x15 / M4x20 / M4x25 / M4x30 - (x4 each)
- M5x15 / M5x20 / M5x25 / M5x30 - (x4 each)
- M6x15 / M6x20 / M6x25 / M6x30 - (x4 each)
- Washer 10mm / 8mm Washer (x4 each)
Mounting hardware included: Warranty:
- Nylon Anchor Plug (x4) 10 years limited
- 14 Guage Coach Screw (x4)
- Washer 20mm (x4)
100 mm
(4")
20 mm
(¾")
85 mm
(3¼")
160 mm
(6¼")
9 mm
(¼")
Ceiling Plate footprint
(not to scale)
NOTE: - This product has been designed to suit
90% of projectors.
- Maximum load =15kg (33lbs).
- Mounting hardware included.
Pitch
+/- 40°
Roll
+/- 20°
TH-WH-PJ-FM
  • Page 1 1

Atdec TH-WH-PJ-FM/TAA Specification

Atdec
Brand
Atdec
Model
TH-WH-PJ-FM/TAA
Category
Projector mounts
Type
Specification
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents