ProScan PDVD1034 User manual

Brand: ProScan

Model: PDVD1034

Category: DVD players

Type: User manual

ProScan PDVD1034

The ProScan PDVD1034 Digital Video Disc Player is a versatile and user-friendly device that offers a wide range of features and capabilities. With its ability to playback a variety of disc formats, including DVD, DVD+R/RW, DVD-R/RW, CD, CD-R, and CD-RW, you can enjoy your favorite movies, TV shows, and music on a single device.

The PDVD1034 also boasts a sleek and compact design, making it a perfect fit for any home entertainment setup. Its intuitive user interface and remote control provide easy navigation and control, while the built-in USB port allows for convenient playback of media from external storage devices.

ProScan PDVD1034

2015.09.2

08:11:14

+08'00'

2015.0

9.25

08:28:5

+08'00'

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

•THISDIGITALVIDEODISCPLAYEREMPLOYSA

LASERSYSTEM.

•TOENSUREPROPERUSEOFTHISPRODUCT,

PLEASEREADTHISOWNER`SMANUALCAREFULLY

ANDRETAINFORFUTUREREFERENCE.

•SHOULDTHEUNITREQUIREMAINTENANCE,

CONTACTANAUTHORIZEDSERVICEPROVIDER.

•MISUSEOFCONTROLS,ADJUSTMENTSTOTHE

UNITORTHEPERFORMANCEOFPROCEDURES

OTHERTHANTHOSESPECIFIEDHEREINMAY

RESULTINHAZARDOUSRADIATIONEXPOSURE.

•TOPREVENTDIRECTEXPOSURETOLASER

 BEAM,DONOTTRYTOOPENTHEENCLOSURE.

VISIBLELASERRADIATIONMAYBEPRESENT

WHENTHEENCLOSUREISOPENED.

•DONOTSTAREINTOBEAM.

WARNING:

TOREDUCETHERISKOFFIREORELECTRICSHOCK,

DONOTEXPOSETHISPRODUCTTORAINOR

MOISTURE.

WARNING:

TOREDUCETHERISKOFFIREORELECTRIC

SHOCK,ANDANNOYINGINTERFERENCE,USETHE

RECOMMENDEDACCESSORIESONLY.

SURGE PROTECTORS:

It is recommended to use a surge protector for AC

connection.LightningandpowersurgesARENOT

covered under warranty for this product.

CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,

DONOTREMOVECOVER(ORBACK).NOUSER-

SERVICEABLEPARTSINSIDE.REFERSERVICINGTO

QUALIFIEDSERVICEPERSONNEL.

The FCC Wants You to Know

Thisequipmenthasbeentestedandfoundtocomplywiththe

limitsforaClassBdigitaldevice,pursuanttoPart15oftheFCC

Rules.Theselimitsaredesignedtoprovidereasonableprotection

against harmful interference in a residential installation.

Thisequipmentgenerates,usesandcanradiateradio

frequencyenergyand,ifnotinstalledandusedinaccordance

with the instructions, may cause harmful interference to

radiocommunications.However,thereisnoguaranteethat

interference will not occur in a particular installation.

Ifthisequipmentdoescauseharmfulinterferencetoradioor

television reception, which can be determined by turning the

equipmentoffandon,theuserisencouragedtotrytocorrect

the interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentand

receiver.

•Connecttheequipmentintoanoutletonacircuitdifferent

from that to which the receiver is connected.

•Consultthedealeroranexperiencedradio/TVtechnicianfor

additional suggestions.

Anychangesormodicationsnotexpresslyapprovedby

the party responsible for compliance could void the user’s

authoritytooperatetheequipment.Whereshieldedinterface

cables have been provided with the product or speciﬁed

additional components or accessories elsewhere deﬁned to

be used with the installation of the product, they must be

used in order to ensure compliance with FCC regulation.

Thelightningashwitharrowheadsymbolwithinanequilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of

sufﬁcient magnitude to constitute a risk of electric shock to persons.

Theexclamationpointwithinanequilateraltriangleisintended

to alert the user to the presence of important operating and

maintenance(servicing)instructionsintheliteratureaccompanying

the appliance.

DANGER:Invisibleandhazardouslaserradiationwhenopenand

interlockfailedordefeated.Avoiddirectexposuretobeam.

Important Safety Instructions

WARNING:

USEUNDERSUPERVISIONOFANADULTDUETOLONGCORD

ThisunithasalongACcordorotherlongcordthatcaneasilybetrippedonorpulledon,causinginjury,

Please make sure it is arranged so it will not drape over a tabletop, etc. where it can be pulled on by

children or tripped over accidentally.

EXERCISE CAUTION AS UNIT HAS SHARP POINTS.

CAN ICES-3 (B)/NMB-3(B)

2015.0

9.25

08:29:0

+08'00'

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general

precautionsandmaynotpertaintoyourunit.Forexample,thisunitmaynothavethecapabilitytobe

connected to an outdoor antenna.

1) Read these instructions.

All the safety and operating instructions should be read before the product is operated.

2) Keep these instructions.

 Thesafetyandoperatinginstructionsshouldberetainedforfuturereference.

3) Heed all warnings.

All warnings on the product and in the operating instructions should be adhered to.

4) Follow all instructions.

All operating and use instructions should be followed.

5) Do not use this apparatus near water.

 Donotusethisproductnearwaterandmoisture,forexample:nearabathtub,washbowl,kitchensinkor

laundry tub; in a wet basement; or near a swimming pool.

6) Clean only with dry cloth.

 Unplugthisproductfromthewalloutletbeforecleaning.Donotuseliquidcleanersoraerosolcleaners.

Use a dry cloth for cleaning.

7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable

operationoftheproductandtoprotectitfromoverheating.Theseopeningsmustnotbeblockedor

covered.Theopeningsshouldneverbeblockedbyplacingtheproductonabed,sofa,rugorothersimilar

surface.Thisproductshouldneverbeplacednearoroveraradiatororheatsource.Thisproductshouldnot

beplacedinabuilt-ininstallationsuchasabookcaseorrackunlessproperventilationisprovidedorthe

manufacturer’s instructions have been adhered to.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not

ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

 Anapplianceandcartcombinationshouldbemovedwithcare.Quickstop,excessiveforce

and uneven surfaces may cause the appliance and cart combination to overturn.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

 Toprotectyourproductfromalightningstorm,orwhenitisleftunattendedandunusedforlongperiods

oftime,unplugitfromthewalloutletanddisconnecttheantennaorcablesystem.Thiswillprevent

damagetotheproductduetolightningandpower-linesurges.

14) Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture or does

not operate normally, or has been dropped.

15) Power source

 Thisproductshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthemarkinglabel.

If you are not sure of the type of power supply to your home, consult your appliance dealer or local power

company.

 Forproductsintendedtooperatefrombatterypower,orothersource,refertotheoperationinstructions.

16) Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antennasystem,extremecareshouldbetakentokeepfromtouchingsuchpowerlinesorcircuitsas

contact with them might be fatal.

Important Safety Instructions

2015.0

9.25

08:29:

+08'00'

17) Overloading

 Donotoverloadwalloutletsandextensioncordsasthiscanresultinariskofreorelectricshock.

18) Object and liquid entry

 Neverpushobjectsofanykindintotheproductthroughopeningsastheymaytouchdangerousvoltage

pointsorshortoutpartsthatcouldresultinreorelectricshock.Neverspillorsprayanytypeofliquidon

the product.

19) Outdoor antenna grounding

If an outside antenna is connected to the product, be

sure the antenna system is grounded so as to provide

some protection against voltage surges and built up

staticcharges.Section810oftheNationalElectricCode

ANSI/NFPA70providesinformationwithrespectto

proper grounding of the mast and supporting structure,

groundingofthelead-inwiretoanantennadischarge

product,sizeofgroundingconductors,locationof

antenna-dischargeproduct,connectiontogrounding

electrodesandrequirementsforthegrounding

electrodes.

20) Service

 Donotattempttoservicethisproductyourselfasopeningorremovingcoversmayexposeyouto

dangerousvoltageorotherhazards.Referallservicingtoqualiedservicepersonnel.

21) Replacement parts

 Whenreplacementpartsarerequired,besuretheservicetechnicianusesreplacementpartsspecied

bythemanufacturerorthosethathavethesamecharacteristicsastheoriginalparts.Unauthorized

substitutionsmayresultinreorelectricshockorotherhazards.

22) Safety check

Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating condition.

23) Wall or ceiling mounting

 Theproductshouldbemountedtoawallorceilingonlyasrecommendedbythemanufacturer.

24) Damage requiring service

 Unplugthisproductfromthewalloutletandreferservicetoqualiedservicepersonnelunderthe

following conditions.

a) Whenthepower-supplycordorplugisdamaged.

b) Ifliquidhasbeenspilledorobjectshavefallenintotheproduct.

c) Iftheproducthasbeenexposedtorainorwater.

d) Iftheproductdoesnotoperatenormallybyfollowingtheoperatinginstructions.Adjustonlythose

controlsthatarecoveredbytheoperatinginstructions,asanadjustmentofothercontrolsmayresult

indamageandwillrequireextensiveworkbyaqualiedtechniciantorestoretheproducttoits

normal operation.

e) Iftheproducthasbeendroppedorthecabinethasbeendamaged.

f) Whentheproductexhibitsadistinctchangeinperformance-thisindicatesaneedforservice.

25) Note to CATV system installer

 ThisreminderisprovidedtocalltheCATVsysteminstaller’sattentiontoArticle820-40oftheNECthat

provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable entry as practical.

NOTE:

Refer all servicing to qualiﬁed service personnel. Servicing is required when the unit has been damaged

in any way such as the following: the power-supply cord or plug has been damaged, liquid has been

spilled into unit, the unit has been exposed to rain or moisture, the unit has been dropped or the unit

does not operate normally.

Important Safety Instructions

2015.09.25

08:29:17

+08'00'

NOTES ON HANDLING:

• When shipping the DVD player, always use

the original shipping carton and packing

materials.Formaximumprotection,repack

the unit as it was originally packed at the

factory.

• Donotusevolatileliquids,suchasinsect

spray, near the DVD player. Do not leave

rubber or plastic products in contact with the

DVDplayerforalongtime.Theywillleave

marks on the ﬁnish.

• ThetopandrearpanelsoftheDVDplayer

may become warm after a long period of use.

Thisisnormalandnotamalfunction.

• When the DVD player is not in use, be sure to

remove the disc and turn off the power.

NOTES ON LOCATING THE DVD

PLAYER:

• When you place this DVD player near a

TV,radioorVCR,theplaybackpicture

may become poor and the sound may be

distorted. In this case, move the DVD player

awayfromtheTV,radioorVCR.

NOTES ON CLEANING:

Use a soft, dry cloth for cleaning

• Forstubborndirt,soakaclothinaweak

detergent solution, wring well and wipe. Use a

dry cloth to wipe it dry. Do not use any type

ofsolvent,suchasthinnerandbenzene,asthey

may damage the surface of the DVD player.

• Ifyouuseachemical-saturatedclothtoclean

the unit, follow that product’s instructions.

NOTES ON MOISTURE CONDENSATION:

Moisture condensation damages the DVD

player. Please read the following carefully.

• Moisturecondensationoccurs,forexample,when

you pour a cold drink into a glass on a warm day.

Drops of water form on the outside of the glass.

In the same way, moisture may condense on the

opticalpick-uplensinsidethisunit,oneofthe

most crucial internal parts of the DVD player.

Moisture condensation occurs during the

following cases:

• When you bring the DVD player directly from a cold

place to a warm place.

• When you use the DVD player in a room where you

justturnedontheheater,oraplacewherethecold

wind from the air conditioner directly hits the unit.

• ln summer, when you use the DVD player in a hot

andhumidplacejustafteryoumovedtheunitfrom

an air conditioned room.

• When you use the DVD player in a humid place.

Do not use the DVD player where moisture

condensation may occur.

• lf you use the DVD player in such a situation, it may

damage discs and internal parts. Remove the disc,

connect the power cord of the DVD player to the

walloutlet,turnontheDVDplayerandleaveitON

for two or three hours. After two or three hours, the

DVD player will have warmed up and evaporated

anymoisture.KeeptheDVDplayerconnectedto

the wall outlet and moisture condensation will

seldom occur.

Important Safety Instructions

Warning:

Cleaningandadjustmentoflensesand/orothercomponentsofplaybackmechanismshouldbe

performedbyaqualiedservicetechnician.

2015.09.25

08:29:24

+08'00'

PLAYABLE DISCS:

ThefollowingdiscscanbeplayedbackonthisDVDplayer:

DISC TYPES:

DVD

Data on most DVDs is divided into sections called titles and

then into subsections called chapters, each of which is given

a title or chapter number. Some features of this DVD player

will not operate with some DVD discs as they are preset. If

a function you selected does not run as desired, refer to the

manual accompanying the DVD disc.

CompatiblewithDVD/DVD±R/DVD±RW/KodakPictureJPEG/MP4

AUDIO CD:

Data on an audio CD is divided into sections called tracks,

each of which is given a track number.

CompatiblewithCD/CD-R/CDRW/MP3

IMPORTANT:

It is important that you read the manual that accompanies the DVD disc, as there are features that

areontheDVDplayerthatcannotbeusedwithcertainDVDs.Therearealsoextrafeaturesonthe

DVDdiscthataredifferentforeachDVDdisc,sotheyarenotexplainedinthisowner’smanual.

This player conforms to the NTSC and PAL color systems. However, if you are in the USA,

Canada or Mexico, leave this setting on NTSC. If incorrectly set to PAL, theTV picture may roll

vertically. In this case, set the TV system to NTSC as speciﬁed.

Notes on Copyright:

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent

copyrighted material without permission. DVD video discs are copy protected, and any recordings

madefromthesediscswillbedistorted.Thisproductincorporatescopyrightprotectiontechnology

that is protected by method claims of certain U.S. Patents and other intellectual property rights

owned by Macrovision Corporation, and is intended for home and other limited viewing uses only,

unlessotherwiseauthorizedbyMacrovisionCorporation.Reverseengineeringordisassemblyis

prohibited.

Region management information:

ThisDVDPlayerisdesignedandmanufacturedtorespondtotheRegionManagementInformation

that is recorded on a DVD disc. If the Region number described on the DVD disc does not

correspondtotheRegionnumberofthisDVDplayer,thisDVDplayercannotplaythatdisc.Youmay

not be able to play back some DVD video discs on this player if they were purchased from outside

yourgeographicareaormadeforbusinesspurposes.Whenyoutrytoplaybackanunauthorized

disc,WrongRegionappearsontheTVscreen.

About Discs

THEREGIONNUMBERFORTHISDVDPLAYERIS:

See the following page for information regarding region numbers.

2015.09.25

08:29:30

+08'00'

Product Overview

1. PLAY/PAUSE ( ): Press to switch between play and pause.

2. STOP (

): Press to stop playback.

3. OPEN:

4. VOL-: Press to decrease the volume level.

5. VOL+: Press to increase the volume level.

6. Charge Indicator: Red indicator will turn on when the unit is charging, and turn off when the

unit is fully charged.

7. Remote Control Sensor

Power Indicator: Greenindicatorwillturnonwhentheunitispoweredon,andturnoffifthe

unit is powered off.

9. DISPLAY ON/OFF:PresstoturnthedisplayONorOFF.

10. MUTE:PresstoturnthesoundOFF.Pressagaintoresume.

11. DISPLAY SETUP: Press to enter the display setup menu.

12. VOL-: Press to decrease the volume level.

13. VOL+: Press to increase the volume level.

14.

Power Indicator: IndicateswhenthesecondaryunitisON/OFF.

MAIN UNIT:

SECONDARY UNIT:

OP EN

Press to open the CD door.

DI SPL AY SE TUPMU TEDI SPL AY ON /OF F

2015.09.25

08:29:36

+08'00'

Product Overview

15. ON/OFF: PowerON/OFFswitch.SlidetoONpositiontopoweron,slidetoOFFpositionto

shut off.

16. PHONE:Headphonejack.

17. AV OUT:Audio/Videooutputjack.

18. Card slot.

19. USB: USB port.

20. DC OUT:Toconnecttothesecondaryunit.

21. DC IN:DCinjack

20. DC IN: DCinjack,connecttotheDCoutjackonmainunitbythesuppliedDCconnection

cable.

21. AV IN:Audio/videoinjack,connecttotheAVOUTJackonthemainunitbythesuppliedAV

connection cable.

22. PHONE:Headphonejack.

23. ON/OFF:PowerON/OFFswitch.SlidetoONpositiontopoweron,slidetoOFFpositionto

shut off.

SECONDARY UNIT:

MAIN UNIT:

SD/MMC:

OFF ONPOWER

PHONE AV OUT

USBSD/MMC CARD

DC OUT

DC IN

AV IN PHONE POWER

OFF ON

2015.09.25

08:29:41

+08'00'

Remote Control

1. DISPLAY ON/OFF: ToturnONorOFFthe

screen.

2. TITLE:Todisplaythetitlemenuof

current disc. Use the Direction and

ENTERbuttonstoselectandplaythe

desired title.

3. DISC MENU:Todisplaythemenuof

current disc. Using the Direction and

ENTERbuttonstoselectandplaythe

desired chapter or track.

4. Previous: Press repeatedly to skip

backward.

Next: Press repeatedly to skip

forward.

6. Stop

: Press to stop.

7. Direction buttons: Press to highlight

the options within the setting menu.

8. SETUP: Presstoenterorexitsetupmenu.

9. Numberic buttons: Press numeric

buttons to enter numbers.

10. PROG (Program) button: Press to

display program setting menu. Use

theNumeric/DirectionandENTER

buttons to set the program as on screen

instructions.

11. ZOOM:Pressrepeatedlytozoomin/out

the picture.

12. DVD/USB/CARD: When USB device and/

or SD Card was inserted, press repeatedly to select the playback source as desired.

13. GOTO: PresstoenterGOTOmenu.UsetheNumeric/DirectionandENTERbuttonstoselectthe

desired track to play.

14. SUBTITLE: Press repeatedly to select the subtitle languages available in the disc.

15.

(Fast Forward): Press repeatedly to search for the desired section. Press button to

resume normal playback.

16.

(Reverse): Press repeatedly to search for the desired section. Press button to resume

normal playback.

17. VOL+ (Volume): Press to increase the volume level.

18. ENTER: Presstoconrmtheselection(settings).

19. VOL- (Volume): Press to decrease the volume level.

20. (Play/Pause): Press to play or pause playback.

21. AUDIO: Press repeatedly to select the audio channels.

22. MUTE: Press to turn off the sound. Press again to resume the sound.

2015.0

9.25

08:29:

+08'00'

Battery Installation:

1. Press the tabs on the battery door and lift it off.

2. Inserttwo(2)AAAsizebatteries(Werecommend

InniCellbatteriesformaximumperformance)into

the battery compartment. Make sure to match the

(+)and(–)endsofthebatterycompartment.

3. Replace the battery compartment door.

BATTERY PRECAUTIONS:

Followtheseprecautionswhenusingabatteryinthis

device:

• Onlyusethesizeandtypeofbatteryspecied.

• Besuretofollowthecorrectpolaritywheninstalling

the battery as indicated in the battery compartment.

A reversed battery may cause damage to the device.

• Donotmixdifferenttypesofbatteriestogether(e.g.AlkalineandCarbon-zinc)orold

batteries with fresh ones.

• Ifthebatteriesinthedeviceareconsumedorthedeviceisnotusedforalongperiod

oftime,removethebatteriestopreventdamageorinjuryfrompossiblebattery

leakage.

• Donottrytorechargenon-rechargeablebatteries;theymayoverheatandrupture

(Followbatterymanufacturer’sdirections).

• Donotdisposeofbatteryinre.Batterymayexplodeorleak.

• Cleanthebatterycontactsandalsothoseofthedevicepriortobatteryinstallation.

Remote Control

23. REPEAT: Press repeatedly to set repeat mode.

24. A-B: Duringplayback,presstosetthebeginningpointofA-Brepeat.Pressagaintosetthe

endpointofA-Brepeat.Theunitwillstartplaybackattheselectedsection.Toresumenormal

playback,presstheA-Bbuttonagain.

25. ANGLE: Press repeatedly to select the available viewing angle.

26. OSD (On Screen Display): Press repeatedly to display the playback information.

2015.09.25

08:29:53

+08'00'

Charging by supplied AC/DC adapter:

1. ConnecttheplugfromthesuppliedAC/DCadaptertotheDCINJackonthemain

unit.

2. ConnecttheAC/DCadaptertothewalloutlethavingAC100-240V~;50/60Hz.

Notes:

• TheAC/DCadapterisintendedtobecorrectlyorientedinaverticaloroormount

position.

• Yourbatterywilllastlongerifyoufollowthesesimpleguidelinesforcaringforand

storing it.

• Forrsttimecharge,chargeitapproximately12hours.Fornormalcharge,itneeds

approximately6hours.

• Rechargeandstorethedevicewithinthetemperaturerangeof5°C~35°C(40°F~95°F).

• Donotovercharge(longerthan24hours).Excessivechargingordischargingmay

shorten the battery’s life.

• Batterylifenaturallyshortensslowlyovertime.

Charging by the supplied Car Adapter:

1. Connect to the cigarette lighter socket of a vehicle that has a 12V battery as the ﬁgure

below.ItisNOTcompatiblewithavehiclethathasa24Vbattery.

2. Thisisaspecialnegativegroundedcaradapter.Usingthiscaradapterwithapositive

grounded car can cause a malfunction.

3. DoNOTpluginthecaradapteruntilthecarignitionisturnedon.

4. Disconnect the car adapter from the cigarette lighter and the unit after use.

Power Source

Tothecigarette

lighter socket

ToDCINJackonthemainunit

Theunithasabuilt-inDC 7.4V1900mAhLithium-ionrechargeablebattery.Rechargeit

as follows:

2015.0

9.25

08:29:5

+08'00'

1. ConnectingthemainunittoaTVwithA/Vconnectioncable.

ConnectedtotheTV

Audio/Video Cable included

Videoinputjack(Yellow)

Audioleftchannelinputjack(White)

Audiorightchannelinputjack(Red)

Making Connections

PHONE AV OUT

USBSD/MMC CARD

DC OUT

DC IN

2015.0

9.25

08:30:

+08'00'

Making Connections

2. Connecting the main unit to the secondary unit.

DCtoDCcable

(included)

3.5mm audio/video cable

(included)

Note:Thesecondaryunitmustbe

connected to the main unit, it can

not be operated independantly.

SECONDARY UNIT:MAIN UNIT:

PHONE AV OUT

USBSD/MMC CARD

DC OUT

DC IN

AV IN PHONE POWER

OFF ON

2015.09.25

08:30:12

+08'00'

1. Recharge or connect the unit to AC/DC Adaptor/ Car Adaptor as previous procedure.

3. Insert the disc to the center spindle with label side face up and close the lid.

4. Power on the unit by sliding the POWER ON/OFFswitchontherearofunittotheON

position.Thegreenindicatorwillturnonandtheunitwillstartplaybackautomatically.

5. Forprivatelistening,insertheadphonesintothephonejack.Theexternalspeakerswill

disconnect automatically.

6. Tosavebatterypowerwhilelisteningtomusic,presstheDISPLAY ON/OFF

turnOFF.PressagaintoturnitbackON.

7. Topoweroff,slidethePOWER ON/OFFswitchtotheOFFposition.

SECONDARY UNIT:

1. Connect the secondary unit to the main unit by the supplied DC and AV connection

cables as previous procedures.

2. Slide the POWER ON/OFFswitchontherightsideofunittotheONpositiontopower

on the secondary unit.

4. Forprivatelistening,inserttheheadphonesintothephonejack.Thespeakerswill

disconnect automatically.

5. Tosavebatterypowerwhilelisteningtomusic,presstheDISPLAY ON/OFF button to

turnOFF.PressagaintoturnitbackON.

6. Topoweroff,slidethePOWER ON/OFFswitchtoOFFposition.

Operation

3. Press the DISPLAY SETUP

VOL +/-

MUTE

and press

button

to set.

button to enter the display setting menu.

Press the

DISPLAY ON/OFF

to move up and down,

MAIN UNIT:

Press the DISPLAY SETUP button to

confirm.

2. Press the OPEN button on main unit to open the CD door.

button on

remote control to

2015.09.25

08:30:19

+08'00'

Operation

(CD/DVD)PROGRAM:

1. During CD or DVD playback, press the PROG(Program)button.TheProgrammenu

appears.

2. Use the numericbuttonstoselectandsetthedesiredTT(Title),CH(Chapters),tracks

you want of the CD or DVD.

3. Use the directionbuttonstomovetothenextinput.Repeatstep2until

programming is completed. Note: Press togotonextpageforprogramming

track 11 to 20.

4. Highlightthe“PLAY”icon,presstheENTER button to start the program play.

5. Press the STOP

button twice to stop the program playback and clear the program

memory.

DVD CD

2015.09.25

08:30:25

+08'00'

Note:Theunitsupportsthefollowingleformats:

• MP3;WMA(Musicle)

• JPEG(Pictures)

• MPEG2;AVI;VOB(Videolesupto640x480pixels)

Make sure correct ﬁles were saved in the USB device or memory cards.

2. PowerONtheunit,andwaituntil“Nodisc”appearsonthescreenorthediscstarts

to play. Press DVD/USB/CARD button to select the desired playback source. Wait

until the folder/ﬁle list appears on the screen. Use the direction buttons to select the

desired ﬁle, then press the ENTER button to start playback.

USB device

(notincluded)

USB or SD/MMC Card Playback

1. Insert the USB Device or SD/MMC memory card into the USB port/card slot as

shown on the figure below.

PHONE AV OUT

USBSD/MMC CARD

DC OUT

DC IN

2015.09.25

08:30:31

+08'00'

Setting Menu

Setting Menus:

In fully stop mode, press the SETUP button on the remote control, the setting menu will

appear on the screen as below. Use the Direction , , , , Numeric and ENTER buttons

to select and highlight the function you need to set or reset. Press the

or conﬁrm the selection. After setting, press the SETUP

exit.

IN GENERAL SETUP PAGE:

1. IftheTVshapeisselected,usetheDirection and

matchtheconnectedTV.

2. If Angle Mark is selected, use the Direction and

to On, when multi-anglesareavailableintheplayingDVD,themulti-anglelogo

will



appear on the screen.

3. IfOSDLang(OnScreenDisplayLanguage)isselected,usetheDirection and

buttons to set the OSD language as desired.

4. If Captions is selected, use the Direction and buttons to set it On or Off.

 IfsettoOn,whenmulti-languageareavailableinplayingdisc,thecaptionswill

appear on screen.

5. If Screen Saver is selected, use the Direction and

approximatelyveminutes.

6. IfLastMemoryisselected,usetheDirection and

time.

ENTER

button to

enter

button to save the settings

and

ENTER

buttons to set the aspect

ratio to

ENTER

buttons to set it On or Off.

If set

ENTER

buttons to set it On or Off.

If set

to On, the screen saver will come on when the unit stops or the image is paused

for

ENTER

buttons to set it On or Off.

If set

to On, the unit will start playback from the position where the disc was stopped

last

2015.0

9.25

08:30:

+08'00'

Setting Menu

IN SPEAKER SETUP PAGE:

If Speaker Setup is selected, press the button,thesub-settingmenuwillappear.

1. IfDownmixisselected,usethe Direction and buttonssetittoLt/Rt;Stereo.

• IfsettoLt/Rt,therearleftorrearrightchannelswillplayonbothLeftandRight

Speakers.

• IfsettoStereo,therearleftchannelwillplayonleftspeaker;therearrightchannelwill

play on right speaker.

IN DOLBY DIGITAL SETUP PAGE:

1. If Dual Mono is selected, use the Direction and button to set it to Stereo, 

L-Mono



(Play Left channel on all speakers), R-Mono (Play Right channel



all

speakers) or Mix-

Mono (Mixed Right and Leftchannelthenplaysonallspeakers)

asdesired.(Functions

dependontherecordingofthedisc).

2. If Dynamic is selected, use the Direction and

desired or turn it off.

ENTER

button to set the dynamic level

2015.09.25

08:30:41

+08'00'

Setting Menu

IN VIDEO SETUP PAGE:

1. If“Picture”isselected,usetheDirection and buttonstosetthepanelquality

(Sharpness;Brightness;Contrast;HueorSaturation)asdesired.

Sharpness:Toadjustthesharpnessofvideooutput

Brightness:Toadjustthevideobrightnesslevelonascaleof-20to+20.

Contrast:Toadjustthevideocontrastlevelonascaleof–16to+16.

Hue:Toadjustthecolorhuelevelonascaleof–9to+9.

Saturation:Toadjustthecolorsaturationlevelonascaleof-9to+9

2. IfPictureQualityisselected,usetheDirection and buttons to set the Sharpness,

Brightness,Contrast,Gamma,HueorSaturationofthevideoinputsignalasdesired.

Sharpness: Toadjustthesharpnessofvideooutput

Brightness: Toadjustthevideobrightnesslevelonascaleof-20to+20.

Contrast: Toadjustthevideocontrastlevelonascaleof–16to+16.

Gamma: Toadjustthevideodisplaygammalevel(High,Medium,LoworNone)

Hue: Toadjustthecolorhuelevelonascaleof–9to+9.

Saturation: Toadjustthecolorsaturationlevelonascaleof-9to+9

ENTER

2015.09.25

08:30:46

+08'00'

Setting Menu

IN PREFERENCE SETUP PAGE:

1. IfTVTypeisselected,usetheDirection and buttonstosettoPAL,AUTO

orNTSC.

(NOTE: TheTVsysteminUSA,CanadaandMexicoisNTSC.)

2. If Audio, Subtitle or Disc Menu is selected, use the Direction and

buttons to the

priorityoftheavailablelanguage.(Functiondepend the recording of DVD).

3. If Parental is selected, use the Direction and buttons to set the rating level as

follows:

• Pressthe

button to enter, the rating level list will appear.

• Pressthe or button to select the desired level.

• Pressthe button to enter, password enter window will pop up.

• Enterthe digitpassword(defaultpasswordis136900 )bypressingtheNumeric

buttons.

• Pressthe buttontosavethesettingsandexit.

RATE LEVELS:

1(KidSaf):Safeforkids

2(G):Allages

3(Pg):Parentalguidance

4(Pg13):Parentalguidancelessthan13yearsold

5(Pgr):Under17yearsold,parentalguidancesuggested

6(R):Under17yearsold,parentalguidancestrongly

7(Nc17):17yearsoldandolder

8(Adult):Adultsonly

NTSC

ENTER

six

2015.09.25

08:30:51

+08'00'

Page is loading ...

ProScan PDVD1034 User manual

Brand: ProScan

Model: PDVD1034

Category: DVD players

Type: User manual

ProScan PDVD1034

Download PDF

report

ProScan PDVD1034 User manual

ProScan PDVD1034 User manual

Related papers

Other documents