Electro-Voice ZX Series Zx3-60 User manual

ZX Series Zx3-60
Electro-Voice
Brand
Electro-Voice
Model
ZX Series Zx3-60
Category
Loudspeakers
Type
User manual

This manual is also suitable for

Electro-Voice® Zx3 Owner’s Manual
Zx3 Series
Loudspeaker
Owner’s Manual
Zx3-60
Zx3-90
Zx3-60PI
Zx3-90PI
Electro-Voice® Zx3 Owner’s Manual
Important Safety Instructions
Zx3 Series Owner’s Manual
Table of Contents
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsu-
lated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa-
nying the appliance.
The asterisk within an equilateral triangle is intended to inform
the user to necessary installation or removal instructions re-
garding equipment or hardware use relating to the system.
Thank you for choosing the Electro-Voice® Zx3 series loudspeaker system. This system is the culmina-
tion of EV’s experience in transducer design. Please take time to consult this manual so that you can
understand all the features built into your EV system and fully utilize all its performance capabilities.
Important Safety Instructions ...........................................................................................................................................1
Zx3 Series Owner’s Manual .............................................................................................................................................1
Safety First ..........................................................................................................................................................................2
Description ..........................................................................................................................................................................3
System Features - Zx3.......................................................................................................................................................3
System Coverage - Zx3 ....................................................................................................................................................3
Suspending Zx3 Speaker Systems ................................................................................................................................4
Zx5 Stage Monitor Positions ............................................................................................................................................9
Specifications ................................................................................................................................................................... 10
Dimensions ........................................................................................................................................................................ 11
Block Diagram .................................................................................................................................................................. 11
Frequency Response ...................................................................................................................................................... 12
Beamwidth and Directivity ............................................................................................................................................. 13
Zx3 Models and Accessories Reference Table ........................................................................................................ 13
Painting Zx3 Speaker Systems ..................................................................................................................................... 14
1
Electro-Voice® Zx3 Owner’s Manual
Safety First
When setting up, installing and using the Electro-Voice® Zx3 speaker system, there are a number of pre-
cautions that you should follow:
· When Electro-Voice® Zx3 speakers are used for portable applications in which they will be positioned
directly on the floor, make sure that the floor or stage is solid and secure.
· Electro-Voice® Zx3 speakers include 1-3/8 inch stand mounts to allow mounting on tripod stands.
Make sure to:
· Check the specifications of the speaker stand to be certain it is capable of supporting the weight of the
speaker.
· Check that the speaker stand is placed on a flat, stable surface and be sure to fully extend the legs of the
stand. Do not try to make the stand “taller” and compromise its structural integrity.
· Route cables and position the stand so that performers, production crew and audience members will not
trip over the stand or cables and pull the speaker system over. Secure cables with wire ties or tape when-
ever possible.
· Do not attempt to suspend more than one speaker on a stand designed for a single speaker
· Unless you are confident that you can safely handle lifting the weight of the speaker onto the stand, ask
another person to help you place it.
· If you intend to hang or fly the Zx3 system, only do so safely with the correct hardware and accessories.
WARNING: Suspending any object is potentially dangerous and should only be attempted by
individuals who have a thorough knowledge of the techniques and regulations of rigging ob-
jects overhead. Electro-Voice® strongly recommends that Zx3 speakers be suspended taking
into account all current national, federal, state and local regulations. It is the responsibility of
the installer to ensure that Zx3 speakers are safely installed in accordance with all such regula-
tions. If Zx3 speakers are suspended, Electro-Voice® strongly recommends that the system be
inspected at least once a year. If any sign of weakness or damage is detected, remedial action
should be taken immediately. There are data sheets for each EV Suspension and Array Kit that
should also be consulted prior to suspending speakers.
· Electro-Voice® does not recommend use of Zx3 speakers outdoors in direct exposure envi-
ronments.
· Electro-Voice® Zx3 loudspeakers are easily capable of generating sound pressure levels suffi-
cient to cause permanent hearing damage to anyone within normal coverage distance. Caution
should be taken to avoid prolonged exposure to sound pressure levels exceeding 90 dB.
2
Electro-Voice® Zx3 Owner’s Manual
Description
System Features - Zx3
System Coverage - Zx3
The Electro-Voice® Zx3 is a unique, lightweight package of pro audio performance, versatility and aes-
thetics. You won’t find a speaker system available on the market that offers the unbelievable sound,
incredible flexibility and tremendous output capability of the Zx3 anywhere near it’s size and weight.
· Full-face grille for a clean, professional look.
· DVX3121 12” woofer with 500 watts continuous power handling.
· ND2 2” voice coil, 1” exit neodymium compression driver.
· Two models: 60° x 60° or 90° x 50° coverage patterns.
· Adjustable monitor angle built into enclosure.
· Integral rigging points and inserts for multiple flying options.
· Full line of accessories for any installation.
· Passive and biamp selectable.
Coverage Patterns and Applications
Zx3-60 60° x 60° coverage for long-throw and cluster applications
Zx3-90 90° x 50° for wider coverage or shorter distances
Figure 1a:
3D EASE Directivity Balloon,
Zx3-60, 60° x 60° Coverage
Figure 1b:
3D EASE Directivity Balloon,
Zx3-90, 90° x 50° Coverage
3
Electro-Voice® Zx3 Owner’s Manual
Suspending Zx3 Speaker Systems
Zx3 enclosures have 4 steel anchor points internally mounted on the top and bottom. Single stud fittings
can be attached to these anchor plates and used as suspension points. Each of these anchor plates also
has a M8 thread to accept rated forged M8 shoulder eyebolts. In addition to these points there are three
additional M8 threaded points; two on the handle side, and one on the rear. These points can be used
for suspending Zx3s vertically, horizontally, individually, in clusters, or to attach to EV mounting brackets.
Working load limits for the Zx3 and fittings are shown in Figure 2.
Figure 2:
Working Load-Limit Rating
of Zx3 Speaker System
Prior to each use, inspect the grid assembly or suspension point(s)
and associated hardware for any cracks, deformations, broken welds,
corrosion, missing or damaged components which could reduce the
grid assembly or suspension point(s) strength. Replace any damaged
hardware. Never exceed the limitations or maximum recommended
load intended for grid assembly design or suspension point(s). As an
added safety measure, it is suggested that the user install a second
suspension point back to the grid (or building structural supports).
This redundant safety point should have as little slack as possible
(less than one inch is preferable). Prior to each use, inspect the
loudspeaker enclosures for any cracks, deformations, missing or dam-
aged components, which could reduce enclosure strength. Inspect
the bracket assembly on the enclosures for any cracks, deformations,
missing or loose screws which could reduce the flying hardware
strength. Replace any loudspeaker systems that are damaged or
missing hardware. Never exceed the limitations or maximum recom-
mended load for the Zx3 systems.
Zx3 M8 Suspension Points
Metric (M8) inserts are equipped on the top and bottom of the enclosure, around the handle, and on the
back of the enclosure for a total of 7 points. The inserts can be used to attach forged eyebolts or rigging
brackets.
Figure 3a:
Zx3 M8 Suspension Points
(Top, Handle, Rear)
Figure 3b:
Zx3 M8 Suspension Points
(Bottom)
(2) M8 Suspension Points
(Single-Stud Anchor Plate
Removal Required)
(2) M8 Suspension Points
(Decal Removal Required)
(1) M8 Suspension Points
(Decal Removal Required)
(2) M8 Suspension Points
(Removal of Handle Bolts
Required)
4
The shaft length of the
eyebolts cannot exceed
20mm on bottom M8
suspension points
Electro-Voice® Zx3 Owner’s Manual
Suspending Zx3 Speaker Systems (cont’)
Suspending the Zx3 using optional Electro-Voice Single-Stud Rigging Kits
The Zx3 is shipped with two single-stud anchor plates for rigging with single-stud rigging. There are two
more locations on the bottom to mount single-stud anchor plates for flying the Zx3 upside-down or hori-
zontally. All of these locations can facilitate M8 Eyebolts if desired as well.
Figure 4:
Suspending the Zx3 Using Included
Single-Stud Anchor Plates
Kit Used (Left View) -
SSK-1 Single-Stud Rigging Kit (x1)
Kits Used (Right View) -
SSK-1 Single-Stud Rigging Kit (x2)
EBK-3 Forged M8 Eyebolt Kit (x1)*
Figure 5:
Suspending the Zx3 Upside-Down Using
Included Single-Stud Anchor Plates and
Single-Stud Rigging Kit
Kits Used -
RK-Z Single-Stud Anchor Plate Kit (x1)
SSK-1 Single-Stud Rigging Kit (x1)
Step 1: Remove Decals Step 2: Attach Single-Stud Anchor
Plates Removed from the Top of the
Enclosure or Optional RK-Z Kit (Shown)
or Eyebolts (Not Shown
*EBK-3 on Bottom of Top Enclosure
(Not Shown, See Figure 3b)
5
Electro-Voice® Zx3 Owner’s Manual
Suspending Zx3 Speaker Systems (cont’)
Horizontal Suspension of the Zx3
The Zx3 is capable of being suspended horizontally from the side with the use of M8 Eyebolts.
Figure 7:
Suspending the Zx3 Horizontally from Handle
Using Optional Forged Eyebolt Kit
Kit Used - EBK-3 Forged M8 Eyebolt Kit (x1)
Figure 6:
Assembling Eyebolts to Handle for Horizontal
Suspension
Kit Used - EBK-3 Forged M8 Eyebolt Kit (x1)
Step 1: Remove Handle
Bolts
Step 2: Attach Eyebolts
6
Electro-Voice® Zx3 Owner’s Manual
Suspending Zx3 Speaker Systems (cont’)
Suspension of the ZX3 to a Truss
The Zx3 is capable of being suspended from a truss in
permanent and semi-permanent applications using the
TMK-ZX3 truss mount kit. The kit allows the ZX3 to be
quickly attached to a truss and rotated horizontally and
vertically for the proper coverage. Please consult the
TMK Series user instructions for more information.
Suspension of the ZX3 to a Wall or Ceiling
The Zx3 is capable of being suspended directly from a wall or ceiling using the MB3 Wall/Ceiling Mount-
ing Bracket. The mounting bracket attaches to the top and bottom suspension points on the ZX3, and is
rotatable for proper coverage. Please consult the MB3 user instructions for more information.
Figure 8:
Suspending the Zx3 from a Truss Using
the Optional Truss Mount Kit
Kits Used -
HA-3 Handle Adaptor (x1)
VSA-1 Strong-Arm Mount (x1)
TCA-1 Truss-Clamp Adaptor (x1)
Figure 9:
Suspending the Zx3 from a Wall or Ceiling Using the
Optional Wall/Ceiling Mounting Bracket
Kit Used -
MB3 Wall/Ceiling Mounting Bracket (x1)
7
Electro-Voice® Zx3 Owner’s Manual
Suspending Zx3 Speaker Systems (cont’)
Using the ZX3 in an Array
The Zx3 can be used in arrays of up to 6 loudspeakers by using the CB5 Array Bracket. The bracket can
be used for both 60° or 90° splay angles. Please consult the CB5 user instructions for more information.
NOTE: Do not
exceed work-
ing load limit for
individual rigging
points when ar-
raying the Zx3.
See Figure 2,
Page 4
Figure 10a:
Arraying Two Zx3’s Using the Optional Array
Bracket Kit
Kits Used -
CB5 Array Bracket Kit (x1)
SSK-1 Single-Stud Rigging Kit (x1)
Figure 10b:
Arraying Three Zx3’s Using the Optional Array
Bracket Kit
Kits Used -
CB5 Array Bracket Kit (x2)
Figure 10c:
Arraying Two Zx3’s Two Enclosures High Using
the Optional Array Bracket Kit
Kits Used -
CB5 Array Bracket Kit (x2)
SSK-1 Single-Stud Rigging Kit (x1)
EBK-3 Forged M8 Eyebolt Kit (x1)
Figure 10d:
Arraying Three Zx3’s Two Enclosures High
Using the Optional Array Bracket Kit
Kits Used -
CB5 Array Bracket Kit (x2)
EBK-3 Forged M8 Eyebolt Kit (x1)
8
Electro-Voice® Zx3 Owner’s Manual
Zx3 Stage Monitor Positions
Zx3 as a Monitor
By design the Zx3 is a perfect solution for stage monitors. As different stage sizes require different moni-
tor angles, the Zx3 offers two angles without any additional accessories.
CAUTION: When flipped to 55° the feet protrude from the enclosure. Care should be taken
when moving the enclosure, since damage to the feet or enclosure might occur if the system is
dropped or slid across a rough surface. It is recommended that the feet be returned to the 45°
position for transport.
Figure 11:
Switching the Monitor Feet from the 45° to 55° Positions
Figure 12a:
Zx3 as Monitor in 45° Position
Figure 12b:
Zx3 as Monitor in 55° Position
Step 1: Remove Monitor Foot
Screws
Step 2: Rotate Monitor Feet 180° Step 3: Re-Attach Monitor Feet
and Screws
9
Electro-Voice® Zx3 Owner’s Manual
Specifications
1
Half Space Measurement.
Freq. Response
1
(-3 dB): 58 Hz - 15 kHz
Freq. Range
1
(-10 dB): 48 Hz - 20 kHz
Rec. Hipass Frequency: 50 Hz
Axial Sensitivity
1
: 97 dB (1W/1m)
Max. Calculated SPL: 131 dB
Coverage (Horiz. x Vert.): 90° x 50° or 60° x 60°
Power Handling (Passive): 600W Continuous, 2400W Peak
LF Power Handling (Biamp): 500W Continuous, 2000W Peak
HF Power Handling (Biamp): 40W Continuous, 160W Peak
LF Transducer: DVX3121, 12 in (305mm) Driver
HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
Compression Driver
Crossover Frequency: 2 kHz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.2 Ohms
Connectors (Standard Version): (2) Neutrik Speakon NL4’s
Connectors (PI Versions Only): 2 Conductor SJO Cable and Gland Nut
Enclosure Material: Polypropylene Structural Foam
Suspension: Enclosure has locations for 4 Single-Stud
Attachment Plates and 7 Forged Steel Eye-
bolts - 2 on Top, 2 on Bottom, 2 on Side,
and 1 on Rear of Enclosure
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Rotatable Logo
Environmental Spec: IEC 529 IP24 / IP44 (PI Version Only)
Dimensions (H x W x D): 613mm x 397mm x 362mm
(24.14” x 15.64” x 14.26”)
Net Weight: 19.8 kg (43.7 lbs)
Shipping Weight: 22.1 kg (48.6 lbs)
10
Electro-Voice® Zx3 Owner’s Manual
Dimensions
Block Diagram
Block Diagram - Biamp Mode
Block Diagram - Passive Mode
Block Diagram - PI Versions
Front View
Top View
Bottom View
Left View Right View Rear View
(Standard Versions)
Rear View
(PI Versions Only)
11
Electro-Voice® Zx3 Owner’s Manual
Frequency Response Graphs
20
50
100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Horizontal
20° Horizontal 30° Horizontal
40° Horizontal 50° Horizontal
20000
10000
1000
100
50
20
316
100
10
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
Impedance (Ohms)
Passive Mode, Half Space
Impedance
Zx3-90 Series
Frequency Response and Impedance
Horizontal Frequency Response
Vertical Frequency Response (Up)
Vertical Frequency Response (Down)
Zx3-60 Series
Frequency Response and Impedance
Horizontal Frequency Response
Vertical Frequency Response (Up)
Vertical Frequency Response (Down)
20000
10000
1000
100
50
20
316
100
10
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
Impedance (Ohms)
Passive Mode, Half Space
Impedance
20
50
100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 20° Horizontal
10° Horizontal 30° Horizontal
12
20000
10000
1000
100
50
20
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Vertical Up
20° Vertical Up 30° Vertical Up
20
50
100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Vertical Down
20° Vertical Down 30° Vertical Down
20
50
100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Vertical Up
20° Vertical Up 30° Vertical Up
20
50
100
1000
10000
20000
70
80
90
100
110
Frequency (Hz)
Sensitivity (dB)
On Axis 10° Vertical Down
20° Vertical Down 30° Vertical Down
Electro-Voice® Zx3 Owner’s Manual
Zx3 Models and Accessories Reference Table
System Model Coverage Finish Weather Resistant Part No.
Zx3-90B 90° x 50° Black No PRD000117-001
Zx3-90W 90° x 50° White No PRD000117-002
Zx3-60B 60° x 60° Black No PRD000117-003
Zx3-60W 60° x 60° White No PRD000117-004
Zx3-90PI-B 90° x 50° Black Yes PRD000117-005
Zx3-90PI-W 90° x 50° White Yes PRD000117-006
Zx3-60PI-B 60° x 60° Black Yes PRD000117-007
Zx3-60PI-W 60° x 60° White Yes PRD000117-008
Beamwidth and Directivity Graphs
Zx3-90 Series
Beamwidth
Directivity
Zx3-60 Series
Beamwidth
Directivity
20
100
1000
10000
20000
360
100
20
3.6
Horizontal
Vertical
Frequency (Hz)
-6dB Beamwidth (degrees)
50
20000
10000
1000
100
20
0
10
20
30
1
10
100
1000
Frequency (Hz)
Directivity Index (DI), dB
Directivity
Factor (Q)
20
100
1000
10000
20000
360
100
20
3.6
Horizontal
Vertical
Frequency (Hz)
-6dB Beamwidth (degrees)
50
20000
10000
1000
100
20
0
10
20
30
1
10
100
1000
Frequency (Hz)
Directivity Index (DI), dB
Directivity
Factor (Q)
Accessory Model Description Part No.
CB5-B Array Bracket Kit, Black Finish 301625-001
CB5-W Array Bracket Kit, White Finish 301625-002
MB3-B Wall/Ceiling Mounting Bracket Kit, Black Finish ACC000032-001
MB3-W Wall/Ceiling Mounting Bracket Kit, White Finish ACC000032-002
SSK-1 Single-Stud Rigging Kit (Set of 3) 301633-000
EBK-3 Forged M8 Eyebolt Kit (Set of 3) 301634-000
RK-Z Single-Stud Anchor Plate Kit (Set of 3) 301812-000
TMK-ZX3 Truss Mount Kit, Includes VSA-1, TCA-1, and HA-3 (Black) KIT000023-001
HDC-3 Heavy-Duty Stackable Cover, Black ACC000031-001
13
Electro-Voice® Zx3 Owner’s Manual
Painting Zx3 Speaker Systems
Painting a Zx3 Enclosure
The Zx3 Loudspeaker Enclosures are made of a high performance Polypropylene material. For best paint
adhesion, we recommend a “Plastic Adhesion Promoter” be applied before any paint. Sherwin Williams
Plastic Adhesion Promoter UP07226 is a good example (See Telex document number LIT000066-000 for
further details.) Once Plastic Adhesion Promoter is applied follow the manufacturer’s painting directions
as you would normally.
Painting a Zx3 Grille
Remove grille from loudspeaker and remove the backing material & logo from grille prior to painting. Once
the paint is dry, reapply the backing material and logo to the grille. Spray adhesive such as 3M Super 77
may help adhere the backing material to the grille.
Additional Precautions to be Taken
Prior to painting, be sure to take precautions not to get paint into the transducers. This can be done by
masking the grille, temporarily removing the grille and masking the transducers, or by temporarily removing
the grille and temporarily removing the transducers. Precautions must also be taken not to get paint into
any exposed electrical components by masking them off prior to painting. It is also recommended that any
exposed rigging points, warning labels, or instruction labels be masked off for ease of future operation.
Figure 13:
Painting the Zx3 Enclosure
Rigging Points Masked
Enclosure
Grille Masked
WARNING: It is critical to the system’s operation
that all transducers and exposed electrical
components be masked off prior to painting.
14
Electro-Voice® Zx3 Owner’s Manual
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Bosch Communications Systems 04/2008
Part Number LIT000168 Rev B
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Electro-Voice
®
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Electro-Voice ZX Series Zx3-60 User manual

ZX Series Zx3-60
Electro-Voice
Brand
Electro-Voice
Model
ZX Series Zx3-60
Category
Loudspeakers
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents