American Power Conversion 15" Rack LCD Monitor Keyboard Mouse User manual
- Category
- Rack consoles
- Type
- User manual
This manual is also suitable for
Installation,
Specifications, and
Settings
Rack LCD Monitor
Keyboard Mouse
This manual is available in English on the enclosed CD.
Dieses Handbuch ist in Deutsch auf der beiliegenden CD-ROM verfügbar.
Este manual está disponible en español en el CD-ROM adjunto.
Ce manuel est disponible en français sur le CD-ROM ci-inclus.
Questo manuale è disponibile in italiano nel CD-ROM allegato.
本マニュアルの日本語版は同梱の CD-ROM からご覧になれます。
Instrukcja Obs
ługi w jezyku polskim jest dostepna na CD.
O manual em Português está disponível no CD-ROM em anexo.
Данное руководство на русском языке имеется на прилагаемом компакт-диске.
Bu kullanim kilavuzunun Türkçe'sä, äläxäkte gönderälen CD äçeräsände mevcuttur.
您可以从包含的 CD 上获得本手册的中文版本。
Contents
Rack LCD Monitor Keyboard Mouse Installation
i
Preliminary Information.................................................. 1
Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Before Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tool required (not provided) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Please recycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Receiving inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation and Removal................................................ 5
Attach the Cable Arm to the LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Install the Power Cord and Communication Cable . . . . . . . . . . . . . . 6
Install the Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation using square holes . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation using round or threaded holes . . . . . . . . . . . . . . . . . . 8
Install the LCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Attach the Cable Arm to the Slide . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remove the LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
On-screen Display......................................................... 12
Component Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the On-screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Image Adjust Sub-menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Colors Sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Rack LCD Monitor Keyboard Mouse Installation
ii
Languages Sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Advanced Sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting ............................................................ 17
Product Information ...................................................... 18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
APC Limited Factory Warranty..................................... 20
Terms of Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Non-transferable Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Warranty Claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Life-Support Policy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
General policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Examples of life-support devices . . . . . . . . . . . . . . . . . . . . . . . .22
Rack LCD Monitor Keyboard Mouse Installation 1
Preliminary Information
Safety Considerations
Warning: Mount the American Power Conversion (APC
®
) Rack LCD Monitor
Keyboard Mouse in the enclosure in a manner that avoids the hazards of an uneven
mechanical load.
Caution: If the LCD is mounted in an enclosed communications rack, the recommended
rack ambient temperature should be no greater than 113°F (45°C).
Caution: Install the LCD in a rack so that there is the correct amount of air flow required
for safe operation of the LCD.
Caution: Do not use the LCD as a shelf or place items on top of the LCD.
Electrical Hazard:
When connecting the LCD to the supply circuit, consider the effect
that overloading of circuits might have on over-current protection and supply wiring. See
the LCD nameplate ratings. Maintain reliable grounding of the LCD. Give particular
attention to any supply connections other than direct connections to the branch circuit
(e.g., use of power distribution units).
Note: Ensure that the LCD power cord can easily reach a power outlet.
Note: Select a power supply cord with an IEC-320 appliance coupler on one end and a
grounding-type attachment plug suitable for use in the country of application on the other
end. The power supply cord should be at least HO3-VV-F or HO3-VVH2-F and be
2-conductor plus ground and minimum of 0.75 mm
2
in cross-sectional area.
2 Rack LCD Monitor Keyboard Mouse Installation
General Information
The Rack LCD Monitor Keyboard Mouse is intended for use with industry-standard racks and
enclosures. The LCD uses only 1 U of rack space, and with adjustable slides, can be installed in
depths ranging from 26 in to 32 in (660 mm to 812 mm). The size of the device provides enough
room for an APC Rack KVM switch to be installed behind the device. The power input is universal,
supporting voltages from 100 to 240 V and frequencies from 50 to 60 Hz.
Rack LCD Monitor Keyboard Mouse Installation 3
Before Installation
Tool required (not provided)
Please recycle
The shipping materials are recyclable. Please save them for later use, or dispose of them
appropriately.
Disclaimer
American Power Conversion is not responsible for damage sustained during reshipment of this
product.
Receiving inspection
Inspect the package and contents for shipping damage. Report any damage immediately to the
shipping agent. Report missing contents, damage, or other problems immediately to APC or your
APC reseller.
Inventory
After unpacking the carton, verify that all required components and hardware have been shipped.
See “Inventory” on page 4 for a list of components.
#2 Phillips
screwdriver
4 Rack LCD Monitor Keyboard Mouse Installation
Inventory
LCD monitor keyboard mouse Cable arm
Slides Left and right threaded and non-threaded
hole mounting adapters
Power cord Communication cable
Phillips screw M6 x 12 mm screws
Rack LCD Monitor Keyboard Mouse Installation 5
Installation and Removal
Attach the Cable Arm to the LCD
6 Rack LCD Monitor Keyboard Mouse Installation
Install the Power Cord and Communication Cable
Connect the LCD using the communication cable (provided).
1. Plug the power cord into the LCD and route it through the upper clips of the cable arm.
2. Plug the communication cable into the correct port on the LCD and route it through the lower
clips of the cable arm.
Rack LCD Monitor Keyboard Mouse Installation 7
Install the Slides
Installation using square holes
Rack LCD Monitor Keyboard Mouse Installation8
Installation using round or threaded holes
1. Remove two Phillips screws from each mounting
adapter using a #2 screwdriver.
2. Remove the square-hole mounting adapter from
each end of the outer slides.
3. Attach the appropriate mounting adapters using the
previously removed screws.
Left and right
threaded hole
mounting adapters
Left and right
non-threaded hole
mounting adapters
Rack LCD Monitor Keyboard Mouse Installation 9
Install the LCD
Note: Support the cable arm during installation of the LCD.
1. Insert the LCD into the rack using the slides attached to the LCD and those already installed
in the rack.
1. Push the LCD into the rack until it stops. Pull the release keys (located on the outside of each
LCD slide) while pushing the LCD into place.
2. Ensure that the LCD is installed on its rails properly by pulling the LCD in and out of the
rack several times.
Rack LCD Monitor Keyboard Mouse Installation10
Attach the Cable Arm to the Slide
Secure the cable arm to the slide using the slotted thumbscrew.
Caution: Do not overtighten thumbscrews if you are using a screwdriver.
Rack LCD Monitor Keyboard Mouse Installation 11
Remove the LCD
1. Pull the LCD out until it stops.
2. Disconnect the power cord and communication cable.
3. Remove the cable arm from the slides by removing the slotted thumbscrews.
4. Gently pull the tabs toward the front of the LCD, while pulling outward on the LCD to
remove it from the enclosure.
12 Rack LCD Monitor Keyboard Mouse Installation
On-screen Display
Component Identification
Exit key
Caps Lock LED
Left arrow key
Scroll Lock LED
Right arrow key
Power LED
Menu key
Touch pad
Auto Setup key
Left/right mouse keys
Num Lock LED
Rack LCD Monitor Keyboard Mouse Installation 13
Using the On-screen Display
To adjust the LCD, use the five control keys above the keyboard.
1. Press the Menu key to display the main menu.
2. Use the Left and Right arrow keys to move among the function icons. Press the Menu key to
select a function.
3. Use the left or right arrow keys to make changes to a function, or to move to a sub-menu.
a. To change a function when there are no sub-menus, press the Menu key once after you
have completed your changes. Use the arrow keys to scroll to another function.
b. To change a function within a sub-menu, scroll to the sub-menu, press the Menu key,
use the arrow keys to move to the function, and push the Menu key again. Use the left
or right arrow keys to make changes to the function, and press the Menu key to finalize
the changes. Then scroll to the Back function, and press the Menu key to return to the
main menu. Scroll to another function using the arrow keys.
4. At any time, press the Exit key to exit the menu system completely.
5. Press the Auto key at any time to automatically adjust the position, color levels, and picture
quality of the screen.
Main Menu
Exit Menu Auto
Icon Function Description
Contrast
Adjust level of color difference between foreground
and background colors.
Brightness Adjust the brightness level of the screen.
Image Adjust Access the Image Adjust sub-menu.
Colors Access the Colors sub-menu.
14 Rack LCD Monitor Keyboard Mouse Installation
Image Adjust Sub-menu
Languages Access the Languages sub-menu.
Advanced Access the Advanced sub-menu.
Exit Exit the On-screen Display.
Icon Function Description
Clock
Adjust the clock setting of the screen so that no dark
vertical bands are visible.
Phase
Adjust the phase setting of the screen so that no dark
horizontal bands are visible.
H Position Adjust the horizontal position of the screen.
V Position Adjust the vertical position of the screen.
Edge Enhance Type
Select the type of edge enhancement (sharpness) for
the screen.
Enhance Level
Adjust the level of edge enhancement (sharpness) of
the screen.
Icon Function Description
15Rack LCD Monitor Keyboard Mouse Installation
Colors Sub-menu
Autosetup
Automatically center, sharpen, and adjust the clock
and phase settings of the screen. Resets the LCD to
its default settings.
Back Go back to the main menu.
Icon Function Function Descriptions
Autolevel
Automatically adjust the color levels displayed on
the screen.
Color Mode
Change the mode in which the screen displays color.
Available modes are Manual, Native, sRGB, and TV.
Gamma
Adjust the level of gamma correction (how gray
levels between black and white are displayed
on-screen). Available in Manual or TV Color Modes
only.
White Temperature
Adjust the color balance level of white light
displayed on the screen.
Hue Adjust the hue level of the screen.
Saturation Adjust the saturation level of the screen.
Color Warp
Adjust the level of each color displayed on the
screen. Available in Manual Color Mode only.
Back Go back to the main menu.
Icon Function Description
16 Rack LCD Monitor Keyboard Mouse Installation
Languages Sub-menu
Advanced Sub-menu
Icon Function Function Descriptions
English
Change the language of the On-Screen Display to
English.
French
Change the language of the On-Screen Display to
French.
Icon Function Function Descriptions
OSD Position
Position the On-Screen Display in one of the four
corners of the screen or in the center of the screen.
Half Tone Turn a semi-transparent background on or off.
OSD Timeout
Adjust the number of seconds before the On-Screen
Display shuts down due to inactivity.
Information
Display information about the LCD Monitor
Keyboard Mouse.
Test Pattern
Display several test-patterns to verify that the
monitor is working properly.
Back Go back to the main menu.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
American Power Conversion 15" Rack LCD Monitor Keyboard Mouse User manual
- Category
- Rack consoles
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
APC SYA12K16P Datasheet
-
-
Schneider Electric 2005 User manual
-
-
-
-
-
-
-