Steren 208-187 Owner's manual

Category
AV extenders
Type
Owner's manual

Steren 208-187 is a 130 ft CAT 6 HDMI and remote control extender that allows you to transmit audio and video signals from a source device to a display device up to 40 meters away using a single Cat5e or Cat6 cable. It supports resolutions up to 1080p and is compatible with Blu-Ray players, DVD players, gaming consoles, and other HDMI-enabled devices. The extender also includes IR extenders that allow you to control the source device from the remote location.

Steren 208-187 is a 130 ft CAT 6 HDMI and remote control extender that allows you to transmit audio and video signals from a source device to a display device up to 40 meters away using a single Cat5e or Cat6 cable. It supports resolutions up to 1080p and is compatible with Blu-Ray players, DVD players, gaming consoles, and other HDMI-enabled devices. The extender also includes IR extenders that allow you to control the source device from the remote location.

Extensor HDMI y de control
remoto por cable UTP CAT6,
de 40 m
Manual de instrucciones
PRECAUCIONES
CONTENIDO
INSTRUCCIONES
CONEXIÓN
ESPECIFICACIONES
208-187
V1.1
3
0617A
• Este aparato NO está destinado para ser
utilizado por personas con capacidades
diferentes, a menos que cuenten con la
preparación y supervisión adecuadas.
• Este producto NO es un juguete;
manténgalo fuera del alcance de los
niños.
1. Conecte un cable Cat6 o Cat5e del transmisor
al receptor.
2. Utilice un cable HDMI para conectar la
fuente de video (Blu-Ray, consola, DVD, etc.) al
transmisor y otro para conectar la pantalla al
receptor.
3. En el transmisor conecte el extensor de IR
(TX), éste debe apuntar hacia la fuente de
video.
4. En el receptor conecte el extensor de IR (RX),
éste debe quedar en un lugar visible y apuntar
hacia el frente.
5. Inserte los eliminadores en ambos módulos y
conéctelos a un tomacorriente.
NOTAS:
En caso de ser necesario coloque los adhesivos en los extensores para fijarlos a una
superficie.
Si experimenta problemas con la conexión presione el botón RESET.
Utilice los soportes y tornillos para sujetar los módulos a una superficie sólida.
El diseño del producto y las especificaciones
pueden cambiar sin previo aviso.
Antes de utilizar su nuevo producto,
lea el siguiente instructivo
Receiver
Sender
Receptor
Soportes
(x4)
Extensores IR
para control
remoto
RX
TX
Eliminadores
Adhesivos
para extensores
Receiver
Sender
1
2
4
5
Alimentación: 5V - - - 1A
Resolución soportada: 480i, 576i, 1080i,
480p, 576p, 720p, 1080p
Temperatura de operación: 0 a 70°
Humedad relativa: 10% a 85% no condensada
Convertidor
Alimentación: 100 - 240 V 50 - 60 Hz 200 mA
Salida: 5 V - - - 1 A
~
Transmisor
Tornillos
(x8)
3
6
Extensor
IR (RX)
Blu-Ray
Pantalla
Extensor
IR (TX)
HDMI
HDMI
Cat 6: 40 m
Cat 5: 20 m
Fuente de video
Reset
CAT6
LINK
IR IN
HDMI OUT
DC 5V
Reset
CAT6
LINK
Transmisor (sender) Receptor (receiver)
IR OUT
HDMI IN
DC 5V
Control remoto
de Blu-Ray
1. Connect a Cat5e or Cat6 cable from transmit-
ter to receiver cable.
2. Use an HDMI cable to connect the video
source (Blu-Ray, console, DVD, etc.) to the
transmitter and another to connect the screen to
the receiver.
3. At the transmitter connect the IR extender
(TX), it must aim to the video source.
4. In the receiver connect the IR extender (RX), it
must be in a visible place and aim forward.
5. Insert the power adaptoers in both modules
and plug into an electrical outlet.
NOTES:
If is necessary place in the extensor adhesives to secure them to a surface.
If you experience problems connecting both modules press the RESET button.
Use the brackets and screws to attach the modules to a solid surface.
5
130 ft CAT 6 HDMI and
remote control extender
CAUTION
CONTENT
INSTRUCTIONS
CONNECTION
SPECIFICATIONS
208-187
V1.1 0617A
• This device cannot be used by people
with different habilities, at less they have
preparation and supervision.
• This product is NOT a toy; keep it
away from children.
Before using your product, please read
the following instructions
Receiver
(x8)
Supports
(x4)
Remote control
extenders IR
Power converter
Adhesives
extenders
1
2
3
6
4
Input: 5 V - - - 1 A
Resolutions: 480i, 576i, 1080i, 480p, 576p,
720p, 1080p
Operational temperature: 0 to 70°
RH: 10% to 85% non condensed
Power converter
Input: 100 - 240 V 50 - 60 Hz 200 mA
Output: 5 V - - - 1 A
Sender
Screws
Product design and specifications are subject to
change without notice.
Blu-Ray
Screen
IR
extender
(TX)
IR
extender
(RX)
Cat 6: 40 m
Cat 5: 20 m
Video source
Reset
CAT6
LINK
IR IN
HDMI OUT
DC 5V
Reset
CAT6
LINK
SENDER RECEIVER
IR OUT
HDMI IN
DC 5V
Remote control
Blu-Ray
Receiver
Sender
Receiver
Sender
~
Instruction manual
  • Page 1 1
  • Page 2 2

Steren 208-187 Owner's manual

Category
AV extenders
Type
Owner's manual

Steren 208-187 is a 130 ft CAT 6 HDMI and remote control extender that allows you to transmit audio and video signals from a source device to a display device up to 40 meters away using a single Cat5e or Cat6 cable. It supports resolutions up to 1080p and is compatible with Blu-Ray players, DVD players, gaming consoles, and other HDMI-enabled devices. The extender also includes IR extenders that allow you to control the source device from the remote location.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages