Renkforce RF-3374950 Owner's manual

Renkforce
Brand
Renkforce
Model
RF-3374950
Category
Coffee making accessories
Type
Owner's manual

This manual is also suitable for

Page is loading ...
Page is loading ...
• Maintenance, modications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Persons and product
• Do not cover the USB network adapter. Always ensure sufcient ventilation of the
USB network adapter. It may heat up considerably during operation.
Operation
a) Driver installation, connection
• Connect the USB network adapter to a USB3.1 port (Type-C™) on a computer in order to
install the requisite drivers. The port must be able to supply a current of 800 mA.
• Connect the RJ45 port of the USB network adapter to your switch or router using a 1:1
connected network cable.
• Insert the supplied data carrier into the respective drive of your computer.
• The system automatically selects the appropriate drivers and installs them. Depending on
the operating system version, administrator rights may be required to install the drivers. If
installation does not start automatically, double click on the setup le to start the installation.
Follow the installation instructions and complete the installation.
• Check that the hoist was installed correctly. The driver must be displayed as “Realtek USB
Family Controller”. In Windows, you will nd it under “Network Adapter”. In other systems,
e.g. Linux, network devices may be displayed differently. See the operating instructions of
these systems for information on where the network devices can be found.
• You can also check the settings of the device, e.g. duplex mode, etc., and set them according
to your preferences.
• You may need to restart your operating system for the USB network adapter to work correctly.
• Your connected computer now has a network connection via the USB 3.1 port (Type-C™).
The enclosed data carrier has a link to the website to update the drivers to the latest
version. Follow the instructions to download new drivers and to update the USB
network adapter.
b) LED indicator
• The USB network adapter features an LED for function display with the following functions:
- LED ashes: Data transmission
- LED off: No network connection
Tips and useful information
• Only connect the USB network adapter to a USB3.1 port (Type-C™) on a computer. A USB
port with a lower specication is too slow.
• If you have a network or system administrator who is responsible for your network (for example
in a larger company), allow him or her carry out the connection and driver installation; do not
install the USB network adapter yourself.
• The stated maximum data transmission rate of 10/100/1000 MBit cannot, in practice, be
achieved. This is due to the transmission method used, transmission errors, other devices
on the network etc.
• If you are using Windows, it may take some time for a PC to appear on the network. When
you switch the computer on and Windows is loaded on all computers after a few seconds, you
cannot usually access another PC immediately.
• If, after a few minutes, it is still not possible to access other PCs, check any rewall and/or
virus scanner settings that may be used.
• Access permissions must also be set accordingly, if you are using an operating system that
offers such features.
• Consult the applicable operating instructions when using a network printer or other devices
on the network.
• There are numerous reasons as to why a network connection may not be successful.
• Please refer to the appropriate specialist literature or to a specialist technician.
- If you are not using a DHCP Server (e.g. integrated into all DSL-routers), you should assign
a xed IP address to each device on the network.
- For example, set the router to 192.168.1.1, set the rst computer to 192.168.1.2, the
second computer to 192.168.1.3, and so on.
- The rst three digits must be the same on all computers; the last digit can range from 1
to 254.
- The “subnet mask” must be set to 255.255.255.0 for all computers on the network.
- Please keep in mind that an IP address (such as 192.168.1.1) can only be used once on the
network. If you set your router to IP address 192.168.1.1, no other device on the network
can use this IP address!
Operating instructions
USB-C GIGABIT NETWORK ADAPTER
Item no. 1687475
Intended use
The product is intended for connection to a USB3.1 port (Type-C™) on a computer, where
it makes a network port with 10/100/1000 Mbps speed available via a cable with RJ45
connection. The USB network adapter detects the possible speed automatically (auto-sensing)
and uses the highest possible. The auto-MDIX feature allows you to dispense with a crossover
cable for physical connection of two devices. For more information on the supported protocols
and functions, please see the “Technical data”.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit or re. Read the operating instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• USB network adaptor
• Data carrier with drivers
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1687475_v1_0618_02_DS_m_4L_(1)
Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the housing or stop the product from functioning properly.
• Use a dry, lint-free cloth to clean the exterior of the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus full your statutory obligations and contribute to protection of the environment.
Technical data
Power supply ................................ Via USB 3.1 Type C Gen 1
Current consumption .................... Max. 800 mA (with super/high/full speed with bus supply)
Network connection ...................... RJ45
USB standard ............................... USB3.1 (compatible with USB1.0/1.1/2.0/3.0)
Network standard ......................... Compatible with IEEE 802.3, 802.3u and 802.3ab
(10Base-T, 100Base-TX and 1000Base-T)
Network speed .............................. 10/100 to 1000 MBit
Operating mode ............................ Supports full- and half-duplex mode via Ethernet Maximum
Transmission Unit (MTU), supports Jumbo frames up to
9 kB
Network cable ............................... Auto-MDIX (crossover and uncrossed)
Remote control via network .......... Magic Packet
®
support, Wake On LAN
TCP Ofoad .................................. For IPv4 and IPV6 with Ofoad Engine (TOE) for
checksums.
Transport layer protocols .............. TCP/UDP (for IPv6 and IPv4)
Internet layer protocols ................. IP, ICMP/IGMP & ICMPv6
Hardware requirements ................ CPU 1.2 GHz or faster, 1 GB RAM or more
Supported operating systems ....... Windows
®
, Vista™ (32/64 Bit), 7 (32/64 Bit),
8.0 (32/64 Bit), 8.1 (32/64 Bit), 10.0 (32/64 Bit), 10S, RT,
Mac OS 10.2 or higher, Linux
Driver CD ...................................... Diameter 8 cm
Cable length ................................. Approx. 6 cm
Operating conditions ..................... 0 to +40 °C, 0 - 90 % relative humidity (non-condensing)
Storage conditions ........................ -10 to +70 °C, 0 - 90 % relative humidity (non-condensing)
Dimensions (L x W x H) ................ 29 x 16 x 64.5 mm
Weight .......................................... 35.3 g
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Renkforce RF-3374950 Owner's manual

Renkforce
Brand
Renkforce
Model
RF-3374950
Category
Coffee making accessories
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents