Lenco Classic User manual

Category
Audio turntables
Type
User manual
Users Manual
TT-34
Wooden turntable with USB
connection
The lightning flash with
arrowhead symbol, within
an equilateral triangle is
intended to alert the user to
the presence of uninsulated
‘dangerous voltage’ within
the product’s enclosure that
may be of sufficient
magnitude to con stitute a
risk of electric shock to
persons.
CAUTION
RISK OF EXECTRIC
SHOCK
DO NOT OPEN
WARNING: TO REDUCE
THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
COVER (OR BACK), NO
USER SERVICE ABLE
PARTS INSIDE REFER
SERVICEING TO
QUALIFIED SERVICE
PERSONNEL
The exclamation point
within an equilateral triangle
is intended to alert the user
to the pres en ce of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions
2) Keep these instructions
3) Heed all warnings
4) Follow all instructions
5) Do not use this apparatus near water
6) Clean only with dry cloth
7) Do not block any ventilation open ings. Install in accordance with the manuf acture.
8) Do not install near any hot sources such as radiations, heat registers, stoves, or
other.
9) Only use attachments/accessories specified by the manufacturer.
10) Unplug this apparatus during lightning storm s or whe n un us ed for long periods of
time.
11) Refer all servicin g to qualified servic e personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normal ly, or has
been dropped.
12) This appliance shall not be exposed to dripping or splashing water and no object filled
with liquid such as vases shall be placed on the apparatus.
13) Do not overload wall outlet. Use only power source as indicated.
14) Use replacement parts as spec ified by the manufacturer.
15) The product may be mounted to a wall only if recommended by the manufacturer.
16) Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks.
PREPARATION FOR USE
UNPACKING AND SET UP
Carefully remove the unit from the display carton and remove all packing material
from the unit.
Unwind the AC power plug and extend it to its full leng th.
Place the unit on a stable, level surface, convenient to an AC outlet, out of direct
sunlight, and away from source of excess heat, dust, moisture, humidity or strong
magnetic field.
Connect the plug to your AC outlet.
Raise the lid to expose the phonograph. The phono graph has been secured for
shipment with a transit screw.
Use a coin or screwdriver to turn the transit screw clockwise. This will allow the
turntable to “float”.
TRANSIT SCREW
Remove the opaque while plastic stylus cover from the phonograph stylus by sliding it
in the di rection of the arrow.
Discard the stylus cover.
Remove the twist-tie that was used to secure the tone arm during shipment.
Release the tone arm lock lever.
Connect the plug to your AC outlet.
EN EN
TONE ARM LOCK LEVER TONE ARM LOCK LEVER
STYLUS COVER STYLUS COVER
POWER SOURCE
This system uses an AC adaptor.
You should have your outlet c hanged by a qual ified licensed el ectrician.
In order to make operation run correctly, the power plug and power jack should be a
suitable match.
IMPORTANT: Raising and Lowering the Lid
To open the lid, raise it as far as it will go until the lid support bracket locks” in the open
position.
To close the lid, lift it upward slightly until the lid support bracket “unlocks”, and then gently
lower the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber “feet” to prevent the product from moving
when you operate the controls. These “feet” are made from non-migrating rubber material
specially formulated to avoid leaving any marks or stains on your f urnitu re. However
certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may
cause the rubber “feet” to soften, and leave marks or a rubber residue on the furniture. To
prevent any damage to your furniture we strongly recommend that you purchase small
self-adhesive felt pads, available at hardware stores and home improvement centers and
apply these pads to the bottom of the rubber “feet” before you place the product on fine
wooden furniture.
LOCATION OF CONTORLS AND INDICATORS
FORNT PANEL
1) PHONOGRAPH LID
2) PHONOGRAPH LID SUPPORT BRACKET
3) 45RPM ADAPTOR
4) VOLUME CONTROL
5) SPEAKERS
BACK PANEL
6) POWER ON/OFF BU TTON
7) AC POWER CORD
8) USB SOCKET
1
5
4
3
2
8
7
6
PHONOGRAPH
1) Turntable
2) 45RMP Adaptor
3) Transit Screw
4) Cue Lever
5) Speed Selector (33 & 45 & 78RPM)
6) Tone Arm Lock
7) Tone Arm with Stylus
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45, and
78RPM records.
1) Press the POWER button to turn on the unit.
2) Make sure that you have removed the stylus cover from the stylus and have released
the Tone Arm Lock that secured the tone arm to the tone arm rest.
3) Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78RPM. If you
are playing 45RPM singles, place the 45RPM adapter on the center spindle .
4) Place your record on the center spindle.
5) Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to the edge of
the record. The turntable starts automatically. Use the CUE lever to gently lo wer the
tone arm onto the record.
6) When the tone arm reaches the end of the record it automatically returns to the tone
arm rest and the record player stops.
7) To turn the system “Off”, press and hold the POWER button 2 seconds.
NOTE: Do not turn or s top the turntable manually, Moving or jarring the Turntable without
securing the Tone Arm c lamp could result in damage to the Tone Arm.
IMPORTANT
TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION, A
SILVER TRANSIT SCREW IS LOCATED AT THE UPPER R IGH T OF THE
TURNTABLE PLATFORM.
BEFORE PLAYING, PLEASE USE A SCREWDRIVER TO TURN THE TRANSIT
SCREW IN CLOCKWISE DIRECTION (SCREW GOING DOWN) COMPLETELY TO
UNLOCK THE TURNTABLE
TO LOCK THE TURNTABLE AGAIN FOR TRANSPOTATION, PLEASE TURN THE
SCREW IN COUNT ER -C LOCKWISE DIRECTION.
Audacity and USB Connection
It supports Windows95 or more advanced version, with the EMS memory more than 128M
and Audacity takes space of 5MB.
Installing the Audacity Software
To install the Audacity software on your computer:
Insert the Audacity disc into the CD drive of your computer.
Click on My Compu ter on the desktop.
Dblclick CD drive to view the c onten ts of the Audacity disc.
Dblclick Audacity Set Up to install the Audacity software according to the instruction.
Install the USB Drive
Make sure the Audacity disc is still in your CD drive.
Use the included USB cable to connect the turntable to your c omputer.
Follow screen instruction to install the USB driver.
Running the software
1. Double click the Audacity software showing red and orange sou nd waves streaming
out the blue headphone, an d the following interface will appear.
*Note: Please review the software licensing and distribution restrictions found on the
software disc. Use of the Audacity software is subject to thos e conditions and restrictions.
**For additional help with recording and editing music using the Audacity software, pleas e
go to: htt p://audacity.sourceforge.net.
1. Click the “start” in the left corner of the computer, Select “Programs”, “Accessories”,
“Entertainment”, “Sound Recorder to open the sound record interface. Select Ed it
and click “Audio Properties” in the bottom of the menu to open “Audio Properties”
interface;
Audacity and USB Connection
2. Sound Recorder Interface
3. Select Edit and click “Audio Properties” in the bottom of the menu to open “Audio
Properties” interface;
4. Audio Properties Interface
Audacity and USB Connection
5. Select sound recording volume and open “Recording Control” interface: Adjust the
line in volume to max or medium, and the sound wave will show on the interface
when recording.
Audacity and USB Connection
1. Using the attribute controls button at the top of the screen, go to beginning, Play,
Record, Pause, Stop and go to end. Use the File, Edit, View, Project, Generate, Effect
and Analyze menus to Save, Export, and edit the m us ic .
2. Select preferences at the bottom of the menu which will open up Audacity
Preferences. You can set the Audio I/O, Quality, File Formats, Spectrograms,
Directories Interface, Keyboard and Mouse in the Audacity preference Interface.
Audacity and USB Connection
Audacity Preference
3. Adjust the output and input volume.
EN EN
Output Volum e Output Volum e
Input Volume Input Volume
4. Select the record button to record the disc, the left and right tracks will s how on the
interface.
5.1
Press this button , start recording.
5.2
Click the button to skip to start;
5.3
Click the button to skip to end;
5.4
Click the button to play;
5.5
Click the button to pause the record play;
5.6 Click the button to stop the recording.
6. Expo rt the Music Files for WAV, MP3, Ogg.
Once you have finished recording, you should save your music to the c omputer.
Click File menu and move down to Export as WAV format, Mp3 format or Ogg format.
Click on any format to save the music, and you will be asked for the file name of the
music recording.
NOTE: Audacity does not export Mp3 files directly;
you should downlo ad the LAME Mp3 encoder;
A link to find LAME Mp3can be found at http//:audacity.sourceforge.net
If do not see the sound waves on the Int erface, when recording, please adjust the line in
volume as follows:
Audacity and USB Connection
Specific Steps as follows:
1) Download “lame_enc.dll” file, and install it to the software list.
2) After starting the program, you have to click at "edit" in the menu bar, “Preference”,
“File Formats”, and click the “search”.
Audacity and USB Connection
3) After opened, it will come to the follo wing message box, click “YES ” to go to
“Lame_enc.dll”, and find the file’s location:
4) After you find the “Lame_enc .dll” file, open it and click “Y” to f inish the installation
Service and support
For helpdesk support and more information, please visit: www.lenco.com
Lenco offers service and warranty in accordance with European law, which means that in
case of repairs (both during and after the warranty period) you should contact your local
dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any
way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty
obligations of the manufacturer will be voided.
ENGLISH
Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low
Voltage Directive (2006/95/EC) issued by the Commission of the European Community.
The declaration of conformity may be consulted at
www.lenco.com
This symbol indicates that the relevant electrical product or battery should not be disposed
of as general household waste in Europe. To ensure the correct waste treatment of the
product and battery, please dispose them in accordance with any applicable local laws of
requirement for disposal of electrical equipment or batteries. In so doing, you will help to
conserve natural resources and improve standards of environmental protection in
treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment
Directive).
®AII rights reserved
Benutzerhandbuch
TT-34
Holzplattenspieler mit
USB-Anschluss
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97

Lenco Classic User manual

Category
Audio turntables
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI