Aeg-Electrolux B8875-5-M User manual

B8875-5

User manual Built-In Electric Oven

Contents2

Contents

Operating Instructions 3

Safety instructions 3

Description of the Appliance 4

General Overview 4

Control Panel 5

Oven Features 5

Oven accessories 6

Before Using for the first time 7

Setting the Time 7

Cleaning for the first time 8

Using the Oven 9

The Electronic Oven Control 9

Rapid heat up 12

Oven Functions 12

Inserting accessories 13

Grilling set 14

Inserting/Removing the Fat Filter 14

Meatprobe 15

Additional functions 17

Other functions 24

Uses, Tables and Tips 26

Baking 26

Roasting 33

Low temperature cooking 35

Grill sizes 36

Defrosting 37

Drying 37

Making preserves 38

Cleaning and Care 39

Outside of the appliance 39

Oven interior 39

Accessories 39

Fat Filter 40

Pyrolytic cleaning 40

Cleaning Reminder 41

Oven lighting 41

Oven carriage door 42

Oven carriage door glass 43

What to do if … 45

Disposal 46

Service 47

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruc-

tion manual carefully. It will enable you to navigate all processes perfectly and most ef-

ficiently.

To refer to this manual any time you need to, we recommend you to keep it in a safe

place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this user manual:

1

Important information concerning your personal safety and information on how to

avoid damaging the appliance.

3 General information and tips

2 Environmental information

3Operating Instructions

Operating Instructions

1 Safety instructions

Electrical safety

• This appliance must be only connected by a registered electrician.

• In the event of a fault or damage to the appliance: Take the fuses out or switch off.

• Repairs to the appliance must only be carried out by qualified service engineers.

Considerable danger may result from improper repairs. If repairs become necessary,

please contact our Customer Services or your dealer.

Child Safety

• Never leave children unsupervised when the appliance is in use.

Safety during use

• This appliance is not intended for use by children or other persons whose physical,

sensory or mental capabilities or lack of experience and knowledge prevents them

from using the appliance safely without supervision or instruction by a responsible

person to ensure that they can use the appliance safely.

• This appliance should be used only for normal domestic cooking, roasting and baking

of food.

• Be careful if connecting electrical appliances to sockets near to this appliance. Electri-

cal leads must not be caught under the hot oven door.

• Warning: Risk of burns! The oven interior becomes hot during use.

• If you use ingredients containing alcohol in the oven, a slightly flammable mixture of

alcohol and air may ensue. In this case, be careful when opening the door. Do not

handle any sources of heat, sparks or naked flames when doing so.

3 Information on acrylamides

According to the latest scientific knowledge, intensive browning of food, especially in

products containing starch, can constitute a health risk due to acrylamides. Therefore we

recommend cooking at the lowest possible temperatures and not browning foods too

much.

How to avoid damage to the appliance

• Do not place aluminium foil over the floor of the oven and do not place baking trays,

pans etc. on the floor as the resulting build-up of heat can damage the oven enamel.

• Fruit juices which drip from baking trays leave stains which cannot be removed. Use a

deep tray for very moist cakes.

• Do not place loads on the open oven carriage door.

• Never pour water directly into the oven when it is hot. This could cause damage and

discoloration to the enamel.

• Rough handling, especially around the edges of the front panel, can cause the glass to

break.

• Do not store any flammable materials inside the oven. These could ignite when the

oven is switched on.

Description of the Appliance4

• Do not store any moist foods inside the oven. This could cause damage to the enamel.

• After switching off the cooling fan, do not keep uncovered dishes in the oven. Mois-

ture may condense in the oven interior or on the glass doors and may get into the

units.

3 Note on enamel coating

Changes in the colour of the oven’s enamel coating as a result of use do not affect the

appliance’s suitability for normal and correct use. They therefore do not constitute a de-

fect in the sense of the warranty law.

Description of the Appliance

General Overview

Oven carriage

door

Control panel

Door

handle

5Description of the Appliance

Control Panel

Oven Features

Oven display

Function buttons

Oven

Top heat and heating elements

Oven lighting

Meat probe connector

Fat Filter

Oven lighting

Fan heating element

Fan

Bottom Heat

Description of the Appliance6

Oven levels

On the oven carriage door there are two racks

with five holes to insert accessories.

Inside of door

On the inside of the oven carriage door you

will find the numbers of the different oven

shelf levels

You will also find some brief information

about the ovens functions, recommended

shelves and temperatures for cooking the

most popular dishes.

Oven accessories

Rack

For cookware, cake tins, roasts and food to be

grilled.

Rack frame

For resting the baking tray and drip tray on.

Baking tray

For cakes and biscuits.

7Before Using for the first time

Roasting Pan

For baking and roasting or as a pan for collect-

ing fat.

Support shelf

Shelf for the drip pan for baking and grilling.

Meat probe

For determining exactly how far joints of meat

are cooked.

Before Using for the first time

Setting the Time

3 The oven only operates when the time has been set.

When the appliance is connected to the electri-

cal supply or when there has been a power cut,

Time of day flashes automatically.

Before Using for the first time8

Using the or button, set the current

time.

After approx. 5 seconds, the clock stops flashing

and the clock displays the time of day set.

The appliance is now ready to use.

Cleaning for the first time

Before you use the appliance for the first time, you should clean it thoroughly.

1 Important: Do not use sharp or abrasive cleaning materials. These could damage the

surface.

3 For metal fronts, use normal commercially available cleaning agents.

1. Open the oven carriage door.

The oven light comes on.

2. Remove all accessories and clean with a warm solution of water and washing-up liquid.

3. Also wipe the oven out with a warm solution of water and washing-up liquid and then

dry it.

4. Wipe the front of the appliance with a damp cloth.

9Using the Oven

Using the Oven

The Electronic Oven Control

3 General instructions

• Always switch the appliance on first by pressing the On/Off button.

• When the selected function is lit, the oven begins to heat up or the time set begins to

count down.

• The Operating time display shows how long the oven has been operating. This display

can only be seen if none of the clock functions Minute Minder , Duration or

End are set.

• The oven light is switched on as soon as an oven function is selected.

• When the selected temperature is reached, an audible signal sounds.

• Switch off the oven using the On/Off button.

Selecting an oven function

1. Switch on the appliance using the On/Off button.

Selection buttons

Temperature/Clock

Oven function selection

Clock functions/Operating timeOven Functions

Clock Functions

Meat Probe

Heat indicator

On/Off

S

p

e

d

c

o

k

Using the Oven10

2. Press the or button repeatedly until the

desired oven function appears.

• A suggested temperature appears in the tem-

perature display.

• If the suggested temperature is not changed

within approx. 5 seconds, the oven starts to

heat up.

3 The oven function can be changed while the

oven is working.

Changing the oven temperature

Press the or button to raise or lower the

temperature.

The setting changes in steps of 5°C.

Checking the temperature

Press the and buttons at the same time.

The current oven temperature appears in the

temperature display.

3 The temperature check does not work with

oven functions with suggested temperatures

that cannot be adjusted, such as e. g., Low tem-

perature cooking.

Switching off the oven function

To switch off the oven, press the or

button repeatedly until no oven function is dis-

played.

11Using the Oven

Switching the oven off

Switch off the appliance using the On/Off

button.

3 Cooling fan

The fan switches on automatically in order to keep the appliance’s surfaces cool. When

the oven is switched off, the fan continues to run to cool the appliance down, then

switches itself off automatically.

3 Heat indicator

Indicates warming up

When the oven function has been switched on

the bars that slowly light up one after the other

indicate how far the oven has heated up.

Speedcook indicator

When the Rapid heat up function has been

switched on, the bars that flash one after the

other indicate that fast heating is working.

Residual heat indicator

When the oven function has been switched

off, the bars that are still lit indicate the re-

maining residual heat in the oven.

Using the Oven12

Rapid heat up

After an oven function is selected, with the use of the additional function Rapid heat up

the empty oven can be pre-heated in a relatively short time.

1 Important: Do not put the food to be cooked into the oven, until Rapid heat up is

completed and the oven is operating using the desired function.

1. Set the desired oven function (e. g. Conventional ). If necessary, change the suggest-

ed temperature.

2. Press the Rapid heat up button.

The bars flashing one after another show that Rapid heat up is operating.

When the temperature set is reached, the bars of the heat indicator light up. An audible

signal sounds.

The oven now continues heating according to the pre-set oven function and tempera-

ture. You can now place the food in the oven.

3 The Rapid heat up function can be switched on with the oven functions True fan ,

Fan baking , Conventional and Rotitherm .

Oven Functions

The oven has the following functions:

Oven function Application

True fan For baking on up to three oven levels at the same time.

Set the oven temperatures 20-40 °C lower than when using

Conventional.

Fan baking For baking on one oven level dishes that require more inten-

sive browning and a crispy base.

Set the oven temperatures 20-40 °C lower than when using

Conventional.

Low temperature

cooking

For preparing especially tender, succulent roasts.

Conventional For baking and roasting on one oven level.

Rotitherm For roasting larger joints of meat or poultry on one level.

The function is also suitable for gratinating and browning.

Dual grill For grilling flat food items in large quantities and for toast-

ing.

Single grill For grilling flat food items placed in the middle of the grill

and for toasting.

Keep warm To keep dishes warm.

Defrost For defrosting e. g. flans and gateaux, butter, bread, fruit or

other frozen foods.

Base heat For baking cakes with crispy or crusty bases.

Pyroluxe menue For automatic pyrolytic cleaning of the oven. It burns off resi-

dues in the oven, which can then be removed with a cloth

when the oven has cooled down. The oven is heated to approx-

imately 500° C.

13Using the Oven

Inserting accessories

Inside the oven carriage door there are five levels to insert accessories.

Inserting the side rails

Take the rack (1) and slide it into the oven level

you want. Push the rack down (2) until it clicks

into place.

3 Oven levels are counted from the bottom to

the top.

Inserting the baking tray or drip pan into

the rack frame:

Place the baking tray or drip pan on the rungs

of the rack frame.

3 Insert the baking tray or drip pan only by using

the rack frame.

Inserting the side rail and drip pan together:

If you want to use the rack and the drip pan to-

gether, first insert the drip pan on the rack

frame and then place the rack on the next level

up.

Using the Oven14

Grilling set

The grilling set includes the support shelf and the drip pan. The support shelf can be

used on either side.

1 Warning: Risk of burning when removing the drip pan from a hot oven.

Put the support shelf all the way in

The support shelf sits in the grease tray.

Place the drip pan in the oven carriage door at

the level you want.

3 For roasting larger pieces of meat or poultry on

one level.

Put the support shelf on a high level

Secure the support shelf with the edge of the

drip pan.

Place the drip pan in the oven carriage door at

the level you want.

3 For grilling flat foods in large quantities and for

toasting.

Inserting/Removing the Fat Filter

Only use the fat filter when roasting to pro-

tect the rear heating elements from fat splashes.

Inserting the fat filter

Hold the fat filter by the grip and insert

the two mounts downwards into the

opening on the rear wall of the oven

(fan opening).

Taking out the fat filter

Hold the fat filter by the grip and un-

hook it.

15Using the Oven

Meatprobe

For switching off the oven when the temperature at the centre of a roast reaches a set

temperature.

There are two temperatures to consider::

– The oven temperature: see Roasting Table

– The core temperature: see Meatprobe Table

1 Important: Only the meat probe supplied may be used. If replacing, please use only

genuine spare parts.

3 Do not use the meat probe on level 1.

1. Switch on the appliance using the On/Off button.

2. Push the tip of the meat probe right into the

meat so that the tip is in the centre of the

meat.

3. Insert the meat probe plug into the socket on

the side wall of the oven as far as it will go.

4. Using the or button, set the desired core

temperature.

The display changes to the current core tem-

perature.

If the current core temperature is already dis-

played before the core temperature is set, then

press the Selection button repeatedly until

the function Meatprobe flashes and then

carry out the setting.

3 The core temperature is displayed from 30°C.

Using the Oven16

5. Select oven function and oven temperature.

As soon as the set core temperature set is

reached, a signal sounds and the oven switches

itself off automatically.

6. Press any key to switch off the signal.

3 Within a few minutes, a provisional end time is calculated, at which the core tempera-

ture set will be reached. This time is constantly recalculated and updated in the display.

For the system to work it is essential that the meat probe is in the meat and in the sock-

et at the start of the cooking process and that it is not removed during the cooking

process.

While the oven is calculating the cooking time, the time and a core temperature indica-

tor shows a ‘flashing square’.

Calculating the end time.

1 Warning: The meat probe is hot! There is a risk

of being burned when removing the plug and

the tip of the meat probe.

7. Remove the meat probe’s plug from the socket

and take the meat out of the oven.

8. Switch off the appliance.

17Using the Oven

Checking or changing the core temperature

– Press the Selection button repeatedly until the function Meatprobe flashes and

the core temperature set appears in the display.

– If necessary, change the temperature using or .

Checking or changing the oven temperature

– If necessary, change the temperature using or .

Additional functions

Minute Minder

To set a countdown. A signal sounds after the time has elapsed.

This function does not affect the functioning of the oven.

Duration

To set how long the oven is to be in use.

End

To set when the oven is to switch off again.

Time of day

To set, change or check the time

(See also section “Before Using for the First Time”).

Heat+Hold

The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the baking

or roasting process is completed.

Selection buttons

Clock

Cook time/End time/Operating time

Clock Functions

Meat Probe

Clock Functions

Time display

Using the Oven18

Cleaning Reminder

The Cleaning Reminder detects when pyrolytic cleaning is required and alerts the user to

this fact.

3 How to use the clock functions

• After a clock function has been selected, the corresponding function light flashes for

about 5 seconds. During this period, the desired times can be set or modified using

the or button.

• When the desired time has been set, the corresponding function light continues to

flash for approx. 5 seconds, then remains illuminated. The set time begins to run.

• With Countdown the oven must also be switched on in order to set the clock function.

• By pressing and at the same time, the time set can be reset.

3 Checking the time set or remaining

Press the Selection button repeatedly, until the appropriate clock function flashes

and the time set or remaining is displayed.

2 Using residual heat with the Duration and End clock functions

When the Duration and End clock functions are used, the oven switches the

heating elements off, when 90% of the time set or calculated has elapsed. The residual

heat present is used to continue the cooking process until the time set has elapsed

(3 to 20 mins.).

Minute Minder

1. Press the Selection button repeatedly until

Minute Minder flashes.

2. Using the or button, set the desired

countdown.

19Using the Oven

After about 5 seconds, the display shows the

time remaining.

Minute Minder lights up

When 90% of the time set has elapsed, a signal

sounds.

When the time has elapsed, a signal sounds for

1minute.

“00.00” and Minute Minder flash.

To stop the flashing and the audible signal:

Press any button.

Duration

1. Select oven function and temperature.

2. Press the Selection button repeatedly until

Duration flashes.

3. Using the or button, set the desired

cooking time.

Using the Oven20

Duration lights up

When the time has elapsed, “00.00” and

Duration flash.

A signal sounds for 2 minutes.

The oven switches itself off.

To stop the flashing and the audible signal:

Press any button.

End

1. Select oven function and temperature.

2. Press the Selection button repeatedly until

End flashes.

3. Using the or button, set the desired

switch-off time.

Page is loading ...

Aeg-Electrolux B8875-5-M User manual

This manual is also suitable for

Aeg-Electrolux B8875-5-M User manual

Related papers

Other documents