AEG SANTO2942-4I User manual

Brand: AEG

Model: SANTO2942-4I

Category: Fridge-freezers

Type: User manual

AEG SANTO2942-4I is an integrated fridge-freezer that offers a range of features to keep your food fresh and organized. With its adjustable shelves and door balconies, you can customize the interior to fit your needs. The fridge compartment features a dedicated compartment for fruits and vegetables, helping to maintain their freshness. The freezer compartment has multiple drawers, providing ample space for frozen goods. The appliance also includes an ice maker, ensuring you always have ice on hand. Additionally, the integrated design allows for a seamless look within your kitchen cabinetry.

AUS

ERFAHRUNG

GUT

Integrierbare Einbau-

Kühl-Gefrierkombination

Integrating Fridge-Freezer

Frigorifero-Congelatore Integrato

Gebrauchs- und Montageanweisung

Operating and Installation Instructions

Istruzioni per l’installazione e l’uso

_______________________

Inhalt

Seite

Bildseiten 3-7

Allgemeine Hinweise 8

Wechsel des Türanschlags 9

Einbauen, Ausrichten und Befestigen 9/10

Türankoppelung 10

Inbetriebnahme und Temperaturregelung 10

Richtig lagern 11

Einfrieren und Tiefkühllagern 11

Eiswürfel bereiten 12

Abtauen 12/13

Reinigung und Pﬂege 13

Störungen und Kundendienst 13/14

Tips 14

_______________________

Contents

Page

lllustration pages 3-7

General instructions 15-16

Rehingeing the door 16/17

Installing, aligning, and ﬁxing 17

Connecting the door 17

Starting up and temperature regulation 17

Correct storage 18

Freezing fresh food and storing frozen food 18

Icemaking 18

Defrosting 19/20

Cleaning and care 20

Faults and servicing 21

Hints 21

_______________________

Indice

Pag.

Illustrazioni 3-7

Indicazioni generali 22/23

Modiﬁca della cernieratura della porta 23

Incorporamento, livellamento e ﬁssaggio 24

Accoppiamento della porta 24

Avviamento in funzione e regolazione

della temperatura 24

Esatta conservazione 25

Congelazione e conservazione in stato

congelato 25

Preparazione di cubetti di ghiaccio 26

Sbrinamento 26/27

Pulizia e cura 27/28

Difetti e servizio tecnico 28

Consigli 28/29

AEG6

50min.

540

547

1775-1780

550min.

560min.

50min.

1772

1032

644

AEG7

90°

AEG8

AEG9

AEG10

AEG11

2222 154-34

AEG12

AEG13

AEG14

AEG15

AEG16

2,7

AEG17

90°

AEG18

26-30

90°

AEG19

AEG20

AEG62

AEG21

AEG22

AEG23

AEG006

AEG25

AEG26

AEG27

AEG110

AEG65

IMPORTANT!

If the fridge-freezer you have purchased is replacing

an older refrigerator or freezer still ﬁtted with a snap

catch or lock, you should render this lock unser-

viceable before throwing the appliance away or

putting it out for environment-friendly refuse collec-

tion. In this way you can prevent children locking

themselves in when playing and thus endangering

their lives.

Please make sure that the pipelines of your fridge-

freezer are not damaged before collection for envi-

ronment-friendly disposal.

Appliance packaging

information

All used materials are environmentally compatible!

They can be safely disposed of or burnt in a refuse

incinerator!

Regarding the materials: the plastics can also be

recycled and are marked as follows:

>PE< for polyethylene e.g. as used in the outer

wrapping and bags inside

>PS< for polystyrene foam e.g. as used in the

packing; this material is basically CFC-free

The cardboard parts are made of waste paper and

should be put back into the waste paper collection

system.

General instructions

You have just purchased a home fridge-freezer which

has been produced according to the standards

applicable to these appliances.

During manufacture, the necessary measures have

been taken as required by the Appliance Safety Act

(GSG), the Accident Prevention Regulations for

Refrigerating Installations (VBG 20), and the Speciﬁ-

cations of the Institute of German Electrical Engi-

neers (VDE).

The refrigeration circuit has been checked for

leakage.

This appliance complies with the following EC

Directives:

- 73/23/EEC of 19.02.1973 - Low-Voltage Directive

- 89/336/EEC of 03.05.1989 (including Amendment

Directive 92/31/EEC) - EMC (Electromagnetic

Compatibily) Directive.

Before starting up, we recommend you to read

the following Operating Instructions, since only

by doing so can you beneﬁt from all the advantages

offered by your fridge-freezer. Please unfold the

illustration pages on the cover to enable you to

compare the text and pictures alongside.

Removing the adhesive tapes

The doors are secured to the housing with adhesive

tapes. Remove any adhesive tape residues with a suit-

able petroleum-based cleansing agent.

Commercial use

Should you use your home fridge-freezer commer-

cially or for purposes other than refrigeration,

freezing, and deep frozen storage of food and drinks,

you must observe the legal requirements applicable

to your area.

Location

The most suitable location is a dry room which can be

ventilated. The refrigerating unit needs a good supply

of air and proper ventilation in order to function

properly. Please make sure that the air-vents in the

plinth underneath the kitchen cabinet and the air-

shafts behind it are not covered over or blocked.

Ambient temperature has an effect on the power

consumption of the unit. The appliance should there-

fore:

- not stand in the direct sunshine, or close to a

radiator or cooker

- stand in a position where the ambient tempera-

ture corresponds with the climate category for

which the appliance is designed.

You will ﬁnd data on this on the rating plate, which is

in the interior of the appliance on the left hand side.

It will consist of one of the following:

Climate category Ambient temperature

from ... to ...

SN +10 to +32°C

N +16 to +32°C

ST +18 to +38°C

T +18 to +43°C.

Appliance and installation

dimensions

Fig. 1

A = 200 cm

air outlet

B = 200 cm

air inlet

C = Split kitchen unit door

D = Depth overall

E = Height overall

Your fridge-freezer needs air

The refrigerating unit does not require any maintenance.

All it needs is proper ventilation. Air intake takes place

through the base of the upright kitchen unit.

Provision for air outlet must be made at the top

behind the upright kitchen unit. In such a unit, a

clear air inlet and outlet cross-section of at least

200 cm

must be provided in the base and towards

the room ceiling.

Ensure that these openings are not obstructed by

base panels, etc.!

Before using for the ﬁrst time

In common with all new appliances, your fridge-

freezer will smell "new". For this reason, the interior

of the fridge-freezer and all accessories should be

cleaned before use (see also "Cleaning and care").

Electrical connection

WARNING - THIS APPLIANCE MUST BE

EARTHED

Please ensure that the voltage and current indicated

on the rating plate agree with the voltage of your

electricity supply.

220/240 volts (i. e. 220/240 V AC).

If your appliance has been equipped with a mains

lead with a moulded-on type plug, you must comply

with the following regulations: The plug moulded on

to the cord incorporates a fuse. For replacement,

use a 13 amp BS 1362 fuse. Only ASTA approved

or certiﬁed fuses should be used. The fuse cover/

carrier must be replaced in the event of changing

the fuse. The plug must not be used if the fuse

cover/ carrier is lost. A replacement cover/carrier

must be obtained from an electrical goods retailer. If

the socket outlets in your home are not suitable for

the plug ﬁtted to the appliance, then the plug must

be cut off and an appropriate one ﬁtted. When

ﬁtting the plug please note the following points:

Important

The wires in the mains lead are coloured in accord-

ance with the following code:

Green and Yellow Earth

Blue Neutral

Brown Live

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

1. The wire which is coloured green and yellow

must be connected to the earth terminal in your

plug, which is marked with the letter E or by the

earth symbol or coloured green, or green

and yellow.

2. The wire which is coloured brown must be con-

nected to the live terminal which is marked with

the letter L or coloured red.

3. The wire which is coloured blue must be con-

nected to the neutral terminal which is marked

with the letter N or coloured black.

When wiring the plug, ensure that all strands of wire

are securely retained in each terminal. Do not forget

to tighten the mains lead clamp on the plug.

Warning! A cut-off plug inserted into a 13 amp

socket is a serious safety (shock) hazard. Ensure

that the cut-off plug is disposed of safely.

Voltage 220/240 V AC

Fuse rating 13 amps

See rating plate for further information.

The rating plate is inside, on the left.

Preparing the upright kitchen

unit

Fig. 2

Before installing the upright furniture unit, the back

panel must be removed where ﬁtted as a transport

safety device.

To ensure satisfactory operation and sealing of the

appliance, the upright kitchen unit with its interme-

diate panels must be exactly at right-angles in all

directions and must be aligned vertically.

The doors of the upright kitchen unit should be

aligned before the appliance is installed, and the

hinge screws should be tightened.

The distance between the kitchen unit door and unit

sides should be 1 mm.

Rehingeing the door

Figs. 3, 4, and 5

During transport, the doors are secured with bolts.

Unscrew the LH upper and lower bolts with a

screw-driver (Fig. 3). Both doors can now be

opened to the right.

If the doors are to be opened to the left to ensure

better operation, you should also unscrew the bolts

on the RH side and unhinge the upper door

upwards.

Unscrew the central door pivot and ﬁt it on the left

(Fig. 4).

Remount the upper door and screw in the upper

bolt on the LH side (Fig. 5). Unscrew the lower bolt

on the RH side and screw it in on the LH side. Both

doors can now be opened to the left.

Installing, aligning, and ﬁxing

Figs. 6, 7, 8, 9, and 10

Insert the fridge-freezer in the recess of the upright

kitchen unit until the upper limit strip (A) bears

against the unit ceiling or intermediate panel and

the lower door pivot (B) (Fig. 6) closes ﬂush with the

unit ﬂoor at the front.

If a gap remains owing to a greater recess height

between the limit strip above and unit ceiling, this

can be closed by insertion of the supplied proﬁle

sealing strip (C) (Fig. 7).

Slide and align a fridge-freezer with doors hinged on

the right until it bears against the LH side (Fig. 8)

and a fridge-freezer with doors hinged on the left

until it bears against the RH side.

Screw in mounting screws (D) above and below.

Insert ventilation grille (E).

Cut supplied the sealing strip (F) (Fig. 9) to length

and press in between the appliance and kitchen

unit side wall.

Seal mounting and hinge holes with supplied plugs

(G) (Fig. 10).

Connecting the door

Figs. 11,12, and 13

Mounting positions for slide pieces (H) (Fig. 11)

should be marked on the appliance doors.

Drillholes of 2.7 mm dia. should be drilled and the

slide pieces screwed on, 2 per door. Open kitchen

unit and appliance doors 90° (Fig. 12). Place guide

pieces (K) on slide pieces (H), prepunch mounting

drillholes 26-30 mm away from the kitchen unit

door edge depending on the furniture sidewall

thickness, and screw on guide pieces (Fig. 13).

Check closing function of doors, and re-adjust slide

pieces (H) and guide pieces (K) as necessary.

Side ﬁxing

Fig. 14

Fixing angles (M) (Fig. 14) are arranged on the front

LH and RH parts of the central crosspiece of the

fridge-freezer.

Loosen the mounting screws, screw the angles on

the kitchen unit side walls, align the kitchen unit side

walls, and retighten the screws on the appliance.

Insert covers (N) on angles.

Insert cover (O) on lower door pivot.

Starting up and temperature

regulation

Figs. 15 and 16 (according to the model)

Insert the plug of your fridge-freezer in a plug socket

with protective earth contact wired as prescribed.

The knob for temperature selection is located in the

upper RH part of the refrigerator compartment (A)

(Fig. 15/Fig 16).

The mark to which the knob must be set is located

on top of the thermostat housing.

Setting "O" means: Off.

Rotation in direction "1": Lighting on, refriger-

ating unit on, the latter then operating automatically.

Setting "1" means: Highest temperature, warmest

setting.

Setting "6" means: Lowest temperature, coldest

setting.

The internal temperature is strongly affected by the

ambient temperature, loading, and frequent door-

opening. If the setting is changed, the refrigerating

unit of your fridge-freezer does not start immedi-

ately if automatic defrosting is in progress.

When starting your fridge-freezer for the ﬁrst time,

we recommend selection of setting "6" = lowest

temperature, coldest setting for 3-4 hours.

The necessary refrigerator and freezer compart-

ment temperatures are then rapidly attained. After

3-4 hours, you can set back the knob to a medium

setting between 2 and 4.

Correct storage

Fig. 17

1 =Butter, cheese

2 =Eggs

3 =Drinks, preserves

4 = Preserves

5 =Pastries, convenience foods, dairy produce

6 =Meat, salami, and ﬁsh

7 =Fruit and vegetables

8 =Storage compartments for frozen food and

ice-cubes

9 =Compartment for freezing fresh food and

storage compartment for frozen food

For safety reasons (such as the risk of an explosion!)

containers containing inﬂammable gases, e.g.

aerosol cans or cigarette lighter reﬁlls, must never be

placed in the freezer or the refrigerator compartment.

Adjusting the storage racks

Fig. 18

Storage shelves made either of glass or of plastic,

are included, depending on which version of which

model you have bought. You must push one of

these shelves into the lowest set of guides, just

above the containers for fruit and vegetables, and it

must stay in this position. If you wish to change the

distance between the other storage shelves, please

raise the shelf at the back and pull it slightly

forwards until it can be swivelled upwards or down-

wards and taken out. To insert it in a different posi-

tion, please follow the same procedure in reverse.

VARIO glass shelf

Fig. 19

If, for instance, you wish to store bottles, cans, or

jars in the upright position, please move the front

half of the VARIO glass shelf (if ﬁtted) to a different

level. You will thus gain the necessary space to

store tall items on the shelf below.

Adjusting the door rack

Fig. 20

Depending on the food stored, some door racks

can be changed to other holders or removed. Take

out the refrigerated food, press the door racks

upwards, reposition them, and press them back

into place.

Freezing fresh food

and storing frozen food

You can use the freezer compartment of your fridge-

freezer combination for freezing of fresh food yourself.

Before ﬁlling the fridge-freezer for the ﬁrst time with

frozen food (deep-frozen food), an inside tempera-

ture of -18 °C must have been attained. Were

commend you to place a commercially available

thermometer with a measurement range of +40°C/-

40°C in the central storage compartment or on the

frozen food. If you want to freeze fresh food yourself,

please observe the following instructions to be sure

of obtaining the best results.

Freeze only sound fresh food. Do not freeze too large

a quantity at any one time. The quality of the food is

best preserved when it is frozen right through to the

core as quickly as possible. The freezing capacity in

24 hours indicated on the rating plate should not be

exceeded.

If you want to freeze fresh food on several consecu-

tive days, this should be limited to 2/3 to 3/4 of the

indicated quantity. If you want to utilize the maximum

freezing capacity, set the knob (Fig. 15 and 16) to

setting "6". For smaller quantities of up to 2 kg, the

knob need not be changed.

Place the packaged food to be frozen in the upper

storage compartment (9) (Fig. 17).

Take special care not to mix already frozen

foods with those not yet frozen.

After around 24 hours (earlier for smaller quantities),

set back the knob of the temperature selector to the

normal setting (between 2 and 4). After freezing, you

can place the frozen food at the appropriate freezing

level.

If further food is to be frozen, you must restack the

frozen food in the storage compartments (8)

(Fig. 17) to obtain free freezing space.

Note for test centres:

Stacking diagrams for determination of freezing

capacity and warm-up time can be requested direct

from the manufacturer.

Icemaking

Fill the ice-tray 3/4 full with cold water, place it in

storage compartments (8) or (9), and allow it to

freeze. The ice-cubes can be easily loosened by

twisting the ice-tray or by holding it for a short time

under running water. To ensure that you always have

stocks available, the ice-cubes can be stored in the

ice-box in the freezer compartment.

Storing frozen food in the

freezer compartment and the

do's and don'ts of

storing frozen food

Once the freezing process is completed,

deepfrozen storage takes place in the temperature

range below -18 °C.

For storage of already frozen food, it is imperative to

note the storage time speciﬁed by the manufacturer

on the packaging. Make sure that only packaged

food is stored in the freezer, since unpackaged food

will soon dry out when exposed to the extreme cold.

With the exception of spirits and drinks containing a

higher percentage of alcohol, beverages in glass

bottles, particularly soft drinks containing carbon

dioxide, juices, beer, wine, etc., should not be stored

in the freezer. When the contents freeze, the glass

bottles will crack or even burst.

Never handle deep-frozen food with wet hands.

Your hands could easily become frozen to the food.

Never use the freezer as a means of cooling hot

meals, since this causes heavy frost formation

inside and an increase in electricity consumption.

Cold-pack accumulator

(Some models only)

In the event of a power cut, the cold pack accumu-

lators (the cold pack accumulator) will prolong the

storage of frozen food by a few hours.

For safety reasons (in some models), during trans-

port, the cold-pack accumulators are placed (the

cold pack accumulator is placed) in the bottom

drawer of the freezer compartment.

To use them efﬁciently, place the frozen cold-pack

accumulators on top of frozen foods in the top

drawer.

Frozen food symbols

Fig. 21

Wharever possible, separate the frozen food in the

compartments and place the supplied rider oppo-

site the food type symbol concerned. This will give

you a better overall view of the food stored, will

enable you to avoid excessive door opening, and

will save you power. The ﬁgures beside the symbols

indicate the maximum storage time in months alto-

gether for several types of frozen food.

Taking out the drawers

The storage baskets have an antitilt feature and are

retained in their end position. This assures safe and

convenient insertion and removal of frozen food.

To remove the storage baskets, withdraw them as

far as their catch, tilt them upwards, and pull them

out forwards.

Opening the freezer

compartment door -

hint on magnetic door seal

After opening and closing the door of the freezer

compartment whilst the latter is in operation, you

will not immediately be able to open the door again,

since a vacuum will have developed inside, keeping

the door closed until the pressures inside and

outside the door have equalized. After a few

minutes, you can easily re-open the door.

Defrosting

Figs. 22 and 23

Frost is automatically eliminated from the evapo-

rator of the refrigerator compartment every time the

motor compressor stops, during normal use.

The defrost water drains out through a trough into a

special container at the back of the appliance, over

the motor compressor, where it evaporates.

It is important to periodically clean the defrost

water drain hole in the middle of the refrigerator

compartment channel to prevent the water over-

ﬂowing and dripping onto the food inside.

Use the special cleaner provided, which you will

ﬁnd already inserted into the drain hole.

The freezer compartment, however, will become

progressively covered with frost. This should be

removed with the special plastic scraper provided,

whenever the thickness of the frost exceeds 4 mm.

During this operation it is not necessary to switch off

the power supply or to remove the foodstuffs.

Never use sharp metal tools to scrape off frost

from the evaporator as you could damage it.

Do not use a mechanical device or any artiﬁcial means

to speed up the thawing process other than those

recommended by the manufacturer.

However, when the ice becomes very thick on the

inner liner, complete defrosting should be carried out

as follows:

pull out the plug from the wall socket or turn the ther-

mostat knob to the «O» setting;

remove any stored food, wrap it in several layers of

newspaper and put it in a cool place;

leave the door open, and insert the plastic scraper in

the appropriate seating at the bottom centre, placing a

basin underneath to collect the defrost water;

when defrosting is completed, dry the interior thor-

oughly;

keep the scraper for future use;

turn the thermostat knob back to the required setting

or replace the plug in the power socket.

After two or three hours, reload the previously

removed food into the compartment.

Important: A temperature rise of the frozen food

packs, during defrosting, may shorten their safe

storage life.

Cleaning and care

Your fridge-freezer should be cleaned at regular

intervals. This should preferably occur when the

appliance is empty or partly loaded. All food

packages remaining in the freezer compartment,

hermetically packed if possible, should then be

wrapped in several layers of newspaper and stored

in a cool place (e. g. cellar).

To clean, take all storage baskets out of the freezer

compartment.

During cleaning, the appliance must basically not be

connected to the mains supply (pull out mains plug

or remove fuse).

For safety reasons, this appliance must never be

cleaned with steam-cleaning equipment. Moisture

could ﬁnd its way into the electronic components,

and steam could cause damage to the plastic

parts.

Make sure that the drain opening of the drip gutter

in the rear wall of the refrigerator compartment

(Fig. 22) is always free. If the water drain opening

becomes choked, it is to be cleaned with the aid of

a wire. Some organic solvents as well as essential

oils (e. g. juice from lemon and orange peel, butyric

acid) attack the plastic parts.

Do not forget that, even in the refrigerator, food

stored too long may spoil. To prevent any odours

from forming, the contents should therefore be

checked from time to time (including accessories)

and thoroughly cleaned with lukewarm water to

which a mild, non-abrasive cleaning agent

containing no acetic acid can be added. Finally,

wash with clean water and wipe dry. After cleaning

of the refrigerator compartment, promptly recon-

nect the appliance to the power supply (see section

on Starting up).

At least once a year, you should thoroughly clean

the heat-emitting condenser (heat exchanger), the

metal grille on the rear wall of your appliance.

When not in use

If your fridge-freezer is to remain unused for any

length of time, it must be disconnected (unplugged)

from the electricity supply.

The appliance should then be cleaned thoroughly

and the appliance doors left ajar to prevent any

odours from forming.

Internal lighting (according to the model)

Fig. 24/25

Light bulb data: 220 V, 15 W

E 14 socket (never insert a bulb of more than 15 W).

Pull out mains plug or remove fuse from

holder.

The light bulb inside the refrigerator compartment

can be reached as follows:

– unscrew the light cover securing screws;

– unhook the moving part.

If the door is open and the light does not come on,

check that the bulb is properly screwed in; if it still

does not work, replace the bulb with one of the

same power.

The maximum rating is shown on the light cover.

Faults and servicing

In order to keep your appliance in perfectly

safe condition, you should arrange for repairs,

particularly to the "live" parts, to be carried

out only by qualiﬁed electricians.

In the event of a break-down you should therefore

contact your electrical dealer or our Customer

Service Centre.

Before calling the Service Centre, please check

whether there is power in the mains socket (e. g. by

plugging a lamp in). Your local electrician will repair

any defects in the mains supply.

If the defect lies in the appliance, please inform the

nearest Service Centre. In order to avoid unneces-

sary travel or expense, please state:

- Model description

- E-number

- F-number of your appliance.

You will ﬁnd these data on the rating plate on the left

inside your appliance. We recommend that you

enter them here:

- Model description. . . . . . . . . . . . . . . . . . . . . . .

- E-number . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- F-number.. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Please note: We have to make a charge if our

Customer Service technician is called in for no

adequate reason, even if the guarantee has

not yet expired.

Minor repairs that you

can carry out yourself

- Spare parts:

Spare parts can be ordered from the service

centre. You can ﬁt these yourself without any

special skill or training, e. g.

- internal equipment parts, such as closed con-

tainers,

egg holders,

door racks,

fruit and vegetable drawers,

storage racks,

ice-box and ice-tray.

Hints on proper use

Store your food, depending on type and sensitivity,

in the appropriate temperature zones. This will

enable you to achieve an optimum storage duration

(see "Correct storage", Fig. 17). Ensure good

packaging and coverage of food intended for

storage in the refrigerator to retain ﬂavour, colour,

moisture, and freshness.

Clean the refrigerator compartment regularly to

ensure hygienic storage of food and to prevent

undesirable odours from forming.

Note the storage duration of deep-frozen food in the

freezer compartment to avoid quality impairment.

Never place hot food in the refrigerator compart-

ment or freezer compartment for cooling.

Hints on energy-saving

One or two additional hints on energy-saving are

given below:

- Do not install your fridge-freezer next to a radia-

tor, oven, or in direct sunlight, since, through

high ambient temperature, the temperature reg-

ulator switches on the refrigerating unit more fre-

quently and for longer.

- Do not place any hot food in the refrigerator

compartment or freezer compartment - ﬁrst

allow the food to cool to room temperature.

- Do not open the doors unnecessarily and close

them again as quickly as possible.

- Check the storage temperature in the freezer

compartment with a thermometer.

- Set the most energy-saving frozen food storage

temperature (see "Starting up and temperature

regulation").

- Ensure good ventilation.

- Keep the heat-emitting condenser (heat

exchanger), the metal grille on the rear wall of

your appliance, clean. Thoroughly clean it at

least once per year.

If you ever move house

If your freezer compartment is not fully loaded, pack

all the frozen food in concentrated fashion at a few

storage levels. Switch the temperature selector knob

to setting "6" 24 hours before the removal van leaves

to build up a low-temperature reserve in the frozen

food. Secure the doors against opening during trans-

port. Place your fridge-freezer on the removal van

last so that you can unload it ﬁrst and replug it into

the mains supply.

AUS

ERFAHRUNG

GUT

2222 154-34

123456789101112/97

AEG Hausgeräte GmbH

Postfach 1036

D-90327 Nürnberg



H 271 280 100 - 0596/00 - 151

AEG SANTO2942-4I User manual

Brand: AEG

Model: SANTO2942-4I

Category: Fridge-freezers

Type: User manual

Download PDF

report

AEG SANTO2942-4I User manual

AEG SANTO2942-4I User manual

Related papers

Other documents