Panasonic KXP1124 Important information

TechInfo Sheet fax: 01344 853394

Data Products email: [email protected]

Panasonic CS U.K. Document No: 002

Model: KX-P1124

Product Group: Printers Model: KX-P1124

Date: 25/09/98 Revision No: 1.0 Document No: 002

Subject: Changing top of form setting.

Question: How do I change the position of the first line of print in relation to the top of my page.

Answer: Firstly you will need to have loaded the paper into your printer by using the Load/Park

facility on the paper bail release lever.

Once the paper is inserted correctly use the button to advance the paper to the

correct top of form setting, this can also be done by using the platen roller.

Once the paper is located in the desired position turn off the power switch for a few seconds

and then power on again. The line counter will now be set at the current position.