Electrolux EBSL7CN User manual

Brand: Electrolux

Model: EBSL7CN

Category: Ovens

Type: User manual

This manual is also suitable for

user manual

Oven

EBSL7

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2

Product description 4

Before first use 5

Control panel 6

Daily use 7

Clock functions 11

Automatic programmes 12

Using the accessories 14

Additional functions 15

Care and cleaning 16

What to do if… 18

Installation instructions 19

Environment concerns 21

Garantie, Garanzia, Guarantee 21

Subject to change without notice

SAFETY INFORMATION

Before the installation and use, read this

manual carefully:

•For your personal safety and the safety of

your property

• For the respect of the environment

• For the correct operation of the appli-

ance.

Always keep these instructions with the ap-

pliance also if you move or sell it.

The manufacturer is not responsible if incor-

rect installation or use results in damage.

Children and vulnerable people safety

• This appliance can be used by children

aged from 8 years and above and per-

sons with reduced physical, sensory or

mental capabilities or lack of experience

and knowledge if they have been given

supervision or instruction concerning use

of the appliance in safe way and under-

stand the hazards involved. Children shall

not play with the appliance.

• Keep all packaging away from children.

There is the risk of suffocation or physical

injury.

• Keep children and animals away from the

appliance when the door is open or the

appliance is in operation. There is the risk

of injury or other permanent disability.

• If the appliance has Child Lock or Key

Lock (Control Lock) function, use it. It

prevents children and animals from acci-

dental operation of the appliance.

General safety

• Do not change the specifications of this

appliance. There is the risk of injury and

damage to the appliance.

• Do not let the appliance stay unattended

during operation.

• Switch off the appliance after each use.

Installation

• Only an approved electrician can install

and connect the appliance. Contact an

approved service centre. This is to pre-

vent the risks of structural damage or

physical injury.

• Make sure that the appliance is not dam-

aged because of transport. Do not con-

nect a damaged appliance. If necessary,

contact the supplier.

• Remove all packaging, stickers and lay-

ers from the appliance before first use.

Do not remove the rating plate. It can in-

validate the guarantee.

• Make sure that the appliance is discon-

nected from the power supply during the

installation.

• Be careful when you move the appliance.

The appliance is heavy. Always use safe-

ty gloves. Do not lift the appliance by the

handle.

• The electrical installation must have an

isolation device which lets you discon-

nect the appliance from the mains at all

poles. The isolation device must have a

contact opening width of minimum 3

mm.

• You must have correct isolation devices:

line protecting cut-outs, fuses (screw

type fuses removed from the holder),

earth leakage trips and contactors.

• Before the installation, make sure that the

kitchen cabinet has the recess dimen-

sions applicable.

2 electrolux

• Make sure that the appliance is installed

below and adjacent safe structures.

• Keep the minimum distances to the other

appliances and units.

• The appliance cannot be positioned on a

base.

• Built in ovens and built in cooking surfa-

ces are attached with special connection

system. To prevent damage to the appli-

ance, only use an appliance with the ap-

pliances from the same manufacturer.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical data on the

rating plate agree with your domestic

power supply.

• Information on the voltage is on the rating

plate.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-way plugs, connectors

and extension cables. There is the risk of

fire.

• Do not replace or change the mains ca-

ble. Contact the service centre.

• Make sure not to squash or cause dam-

age to the mains plug (if applicable) and

cable behind the appliance.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug

– if applicable.

Use

• The appliance is only for domestic use.

Do not use the appliance for commercial

and industrial use.

• Only use the appliance for domestic

cooking tasks. This is to prevent physical

injury to persons or prevent damage to

property.

• Do not use the appliance as a work sur-

face or storage surface.

• The interior of the appliance and the ac-

cessories become hot during use. There

is the risk of burns. Use safety gloves

when you insert or remove the accesso-

ries or pots.

• Be careful when you remove or install the

accessories to prevent damage to the

oven enamel.

• Always stay away from the appliance

when you open the door while the appli-

ance is in operation. Hot steam can re-

lease. There is the risk of skin burns.

• To prevent damage or discoloration to

the enamel:

– do not put any objects directly on the

appliance floor and do not cover it with

aluminium foil;

– do not put hot water directly into the

appliance;

– do not keep moist dishes and food in

the appliance after you finish the cook-

ing.

• Discoloration of the enamel has no effect

on the performance of the appliance so it

is not a defect in the sense of the warran-

ty law.

• Do not apply pressure on the open door.

• Always close the appliance door when

you cook, even while grilling.

Heatable drawer

• The heatable drawer becomes hot during

use. There is risk of burns.

• Do not store any flammable materials in

the appliance or in the drawer.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the appliance from

the power supply.

• Before maintenance, make sure that the

appliance is cold. There is the risk of

burns. There is the risk that the glass

panels can break.

• Keep the appliance clean at all times. A

build-up of fats or other foodstuff can re-

sult in a fire.

• Regular cleaning prevents the surface

material from deteriorating

• Use a deep baking tray for very moist

cakes to prevent that fruit juices cause

stains that can be permanent.

•For your personal safety and the safety of

your property, only clean the appliance

with water and a soap. Do not use flam-

mable products or products that can

cause corrosion.

• Do not clean the appliance with steam

cleaners, high-pressure cleaners, sharp

objects, abrasive cleaning agents, abra-

sive sponges and stain removers

• If you use an oven spray, follow the in-

structions from the manufacturer.

electrolux 3

• Do not clean the glass door with abrasive

cleaning agents or metal scraper. Heat

resistant surface of the inner glass can

break and shatter.

• When the door glass panels are dam-

aged they become weak and can break.

You must replace them. Contact the

service centre.

• Be careful when you remove the door

from the appliance. The door is heavy!

• Do not clean catalytic enamel (if applica-

ble).

Steam cooking

• Do not open the oven door during Steam

cooking. Steam can release. There is the

risk of skin burns. There is the risk that

steam causes moisture damage to units.

Oven lamp

• Bulb lamps used in this appliance are

special lamps selected for household ap-

pliances use only. They cannot be used

for the full or partial illumination of a

household room.

• If it becomes necessary to replace the

lamp use one of the same power and

specifically designed for household appli-

ances only.

• Disconnect the appliance from the power

supply before the replacement of the

oven lamp. There is the risk of electrical

shock.

Service centre

• Only an approved engineer can repair or

work on the appliance. Contact an ap-

proved service centre.

• Use only original spare parts.

Disposal of the appliance

• To prevent the risk of physical injury or

damage

– Disconnect the appliance from the

power supply.

– Cut off the mains cable and discard it.

– Discard the door catch. This prevents

children or small animals from being

closed inside of the appliance. There is

the risk of suffocation.

PRODUCT DESCRIPTION

General overview

4 electrolux

1 Water drawer

2 Electronic programmer (display and

touch sensor fields)

3 Heating element

4 Oven lamp

5 Meat probe socket

6 Fan

7 Oven lamp

8 Rear wall heating element

9 Steam generator with cover

10 Oven shelf runners, removable

11 Heatable drawer

12 Bottom heat

13 Shelf positions (levels)

Oven accessories

Oven shelf - for cookware, cake tins,

roasts.

Flat baking tray - for cakes and

biscuits.

Deep roasting pan - To bake and roast

or as pan to collect fat.

Meat probe - To measure how far the

meat is cooked.

Quick Sponge 180 - For absorbing

residual water from the steam

generator.

Glass cookware - with 2 grill inserts.

Flat baking tray and deep roasting pan

are not suitable for Full Steam cooking.

•

Heatable drawer

Below the oven cavity is the heatable

drawer. You can pre-heat cookware in

the drawer.

BEFORE FIRST USE

Warning! Refer to "Safety information"

chapter.

electrolux 5

Initial Cleaning

• Remove all parts from the appliance.

• Clean the appliance before first use.

Caution! Do not use abrasive cleaning

agents! This can damage the surface.

Refer to chapter "Care and Cleaning".

First Connection

When you connect the appliance to the

mains or after the power cut you have to

set the language, display contrast, display

brightness and time of the day. Touch + or

- to set the value. Touch OK to confirm.

CONTROL PANEL

Electronic programmer

123

1 Menu option symbol (with oven shelf

level)

2 Clock

3 Heat indicator

4 Temperature / weight

5 Time functions

Panel sensor fields overview

Sensor field Function Comment

To activate or deactivate the

oven lamp.

To light up the oven interior, for example for

cleaning.

To activate and deactivate the

appliance.

To show the main menu. The set function deactivates (except for the

countdown timer).

To move down and up in the

menu.

When a function is on:

• Touch the sensor field one time: Open the

higher menu (function remains on). After 5

seconds the appliance switches to the initial

menu option

• Touch the sensor field two time: Change to

the higher menu and move up and down

(the function deactivates)

6 electrolux

Sensor field Function Comment

To set the values (example: tem-

perature, time, weight, degree to

cook).

To operate the value:

• Touch the sensor field one time: The sym-

bol flashes

• Touch the sensor field two time: You can

set the value

To set the values:

• Touch the sensor field one time: To set the

value in slow steps

• Hold down the sensor field: To set the val-

ue in fast steps

To set the display to zero, when you set a

cook time or the time

• Touch + and - at the same time.

To set the time functions, more

functions and Meat probe.

To confirm. -

To activate or deactivate the

heatable drawer.

Touch the sensor fields to operate the

appliance. Make sure, that you only

touch one sensor field. If you apply

your finger too flat, you could touch

more sensor fields.

DAILY USE

Warning! Refer to "Safety information"

chapter.

Display symbols

During appliance operation display shows

various symbols.

Symbol

Display (ex-

amples)

Function

Minute Mind-

4:30

The countdown timer is on.

Time 10:00

The display shows the time set.

Duration 1:00

Shows the time required for the cooking cycle.

End Time 14:50

The display shows the time, when the cook time is com-

pleted.

Start after

some time

0:45

The display shows the time when the appliance starts to

cook. (When you use End Time and Cook Time com-

bined).

Temperature

1. Indicates temperature level in the cavity. Display

shows it also after you deactivate the appliance and

the cavity is still warm.

2. Rapid heat-up is active. It reduces heat up time.

Weight 1,5 kg

The display shows that automatic weight system is active

or weight can be changed.

Meat probe 75°C

• The Meatprobe is installed

• The Meatprobe Automatic is on.

• You can change the core temperature.

electrolux 7

Symbol

Display (ex-

amples)

Function

Heat+Hold 80°C

The display shows the function is active.

The menus in overview

Main menu

Symbol Menu item Application

Assisted Cooking Contains list of automatic cooking programmes.

Heating Functions Contains list of oven heating functions.

My Programmes

Contains list of favourite cooking programmes

created by user.

Cleaning Menu Contains oven cleaning functions.

Basic Settings You can use it to set other oven settings.

Submenus

Submenus for:

Assisted Cooking

Symbol Submenu

Pork/Veal

Beef/Game/Lamb

Poultry

Fish

Cake

Desserts

Pizza/Pie/Bread

Casseroles/Gratins

Side Dishes

Combi Steaming

Convenience

Specials

Submenus for: Heating Functions

Oven function Application

Fan Cooking For baking on up to three oven levels at the same

time. Set the oven temperatures 20-40 °C lower than

when using Conventional.

Moist Fan Cooking For energy-saving baking and cooking of mainly dry

bakery items as well as for baking in tins on one level.

Conventional Cooking For baking and roasting on one oven level

8 electrolux

Oven function Application

Pizza Setting For baking on one oven level dishes that require more

intensive browning and a crispy base. Set the oven

temperatures 20-40 °C lower than when using con-

ventional.

Turbo Grill For roasting larger joints of meat or poultry on one

level. The function is also suitable for gratinating and

browning.

Economy Grill For grilling flat foodstuffs placed in the middle of the

grill and for toasting.

Dual Grill For grilling flat foodstuffs in large quantities and for

toasting.

Bottom Heat For baking cakes with crispy or crusty bases.

Slow Cook For preparing especially tender, succulent roasts.

Regenerating For heating up and defrosting dishes.

Quarter Steam + Heat For baking and roasting and warming up frozen or

chilled foods.

Half Steam + Heat For foods with a high moisture content and for reheat-

ing foods.

Full Steam For fruit, vegetables, fish, potatoes, rice, pasta or spe-

cial side-dishes.

Submenus for: My Programmes

Symbol Submenu

- 1 - My Programmes

- 2- My Programmes

- ...

- Edit Programme Name

Submenus for: Cleaning Menu

Symbol Submenu

Steam Cleaning

Cleaning Assistant

Submenus for: Basic Settings

Symbol Submenu Description

Set Time of Day Sets the current time on the clock.

Time Indication

When ON, the displays shows the current time

when you deactivate the appliance.

Set+Go

When ON you can choose Set+Go function in the

Select Options window.

electrolux 9

Symbol Submenu Description

Heat+Hold

When ON you can choose Heat+Hold function in

the Select Options window.

Time Extension

Activates and deactivates the Time Extension

function.

Display Contrast Adjusts display contrast by degrees.

Display Brightness Adjusts display brightness by degrees.

Set Language Sets the language for the display.

Buzzer Volume

Adjusts the volume of the touch-tones and signals

by degrees.

Key Tones Activates and deactivates the touch fields tone.

Alarm/Error Tones

Activates and deactivates the alarm tone (if you try

to set option which is not available).

Service Shows the software version and configuration.

Factory Settings

Reset all settings to factory settings (including My

Programmes ).

Activating and deactivating the

appliance

Touch

to activate or deactivate the ap-

pliance.

Operation of the menus:

1. Activate the appliance.

Touch

or to select the menu op-

tion.

3. Touch OK to move to submenu or ac-

cept setting.

At every point you can get back to the main

menu with

Starting a heating function

1. Select Heating Functions menu. Touch

OK to confirm.

2. Select heating function. Touch OK to

confirm.

3. Set the temperature. Touch OK to con-

firm.

Switching off the heating function

Touch

to cancel the procedure.

The display shows the main menu.

Setting the oven temperature

Touch + or - to set the temperature.

The appliance starts to heat.

When the appliance operates at the set

temperature, an acoustic signal

sounds.

Showing the oven temperature

Touch + or -at the same time.

The display shows the oven temperature.

Heat-up indicator

When you activate an oven function, the

bar on the display comes on. The bar

shows that the temperature increases.

Rapid heat-up indicator

For some oven functions the rapid heat-up

function decreases the heat-up time auto-

matically. The bar of the indicator moves

from right to left until the oven reaches the

target temperature.

Residual heat indicator

When you deactivate the appliance, the dis-

play shows the residual heat. You can use

the heat to keep the food warm.

Steam cooking functions

Important! Always use the steam cooking

functions together with the clock functions:

Duration

or End Time (see section

Clock Functions Duration

/ End Time

Important! Use only water as a liquid!

When there is not water left buzzing sound

operates. When you fill drawer with water

the buzzing tone switches off again.

10 electrolux

Because of the automatic steam dis-

persal period of approximately 5 mi-

nutes at the end of the cooking time

and the heating up time of approxi-

mately 2 minutes, settings less then 10

minutes have small effect.

Steam also release when the door is open.

Full Steam

1. Fill water (650 ml) into the water drawer

in the control panel.

The water supply is for approximately

30 minutes.

2. Start the oven with the On/Off control

Use

or control to select the

menu option Cleaning Menu .

Confirm with

Use

or control to select the

menu option Full Steam .

Confirm with

Use

or to set temperature.

Use

to set the DURATION function

or END . Set the cooking time

or switch-off time with

or .

The first steam shows after approxi-

mately 2 minutes. When the oven rea-

ches set temperature an acoustic signal

sounds.

Another acoustic signal sounds at the

end of cooking time.

9. Stop the signal and the oven with the

On/Off control

After the oven cools down, soak up all re-

maining water from the steam generator

with the Quick Sponge and clean if it is

necessary with some vinegar.

Let the oven dry fully with the open door.

Half Steam + Heat and Quarter Steam +

Heat

The continual change from fan to steam

takes place automatically, with Half Steam

+ Heat .

To set Half Steam + Heat and Quarter

Steam + Heat function use the same pro-

cedure as for Full Steam .

CLOCK FUNCTIONS

Clock functions

Symbol Function Description

Minute Minder

To set a countdown (max 2 hours 30 minutes). This function

has no effect on the operation of the appliance.

Duration

To set how long the appliance has to be in operation (max. 23 h

59 min).

End Time

To set the switch-off time for an oven function (max. 23 h 59

min).

You can use Duration and End Time at

the same time, if the appliance is to ac-

tivated and deactivated automatically

later.

If you set the time for a clock function, the

time starts to count down after 5 seconds.

Setting the clock functions

1. Activate the appliance. Set the heating

function and, if necessary, the tempera-

ture.

Touch

again and again until the dis-

play shows the necessary clock function

and the related symbol.

electrolux 11

3. Touch + or - to set the necessary time.

Touch OK to confirm.

When the appliance operates at the set

time, an acoustic signal sounds. The

appliance deactivates. The display

shows a message.

4. Touch a sensor field to stop the signals.

With the Minute Minder you must acti-

vate the appliance to set the clock

function. You do not have to set a

heating function.

With the Duration and End Time , after

90 % of the set time, an acoustic signal

sounds. The appliance deactivates.

The appliance uses the residual heat to

continue the cooking process until the

time is completed (3-20 minutes).

When you use Meat Probe, Duration

and End Time do not work.

Time Extension

The Time Extension makes the oven func-

tion continue after the set time ends.

• Applicable for all oven functions with Du-

ration or Weight Automatic .

• Not applicable for oven functions with

Meatprobe .

Activating the function:

1. When the cooking time ends, an acous-

tic signal sounds. Touch any sensor

field.

2. The display shows the message for

Time Extension for five minutes.

Touch

to activate.

4. Set Time Extension period. Touch OK

to confirm.

SET+GO

SET+GO function lets you set an oven

function (or programme) and use it later

with one touch of the sensor field.

Activating the function:

1. Activate the appliance.

2. Set the heating function.

Touch

again and again until the dis-

play shows Duration .

4. Set the time.

Touch

again and again until the dis-

play shows SET+GO .

6. Touch OK to confirm.

To start SET+GO touch any sensor field

(except

). The set oven function starts.

When the oven function ends, an acoustic

signal sounds.

When the oven function operates, the

function Key Lock is on.

You can activate and deactivate the

SET+GO function in the Basic Settings

menu.

Heat+Hold

The Heat+Hold function keeps prepared

food warm at 80° for 30 minutes. It acti-

vates after the baking or roasting procedure

ends.

Conditions for the function:

• The set temperature is more than

80°C.

• The function duration is set.

Activating the function

1. Activate the appliance.

2. Select the oven function.

3. Set the temperature above 80°C.

Touch

again and again until the dis-

play shows Heat+Hold . Touch OK to

confirm.

When the function ends, an acoustic signal

sounds.

The Heat+Hold function operates for 30 mi-

nutes.

The Heat+Hold function stays on if you

change the oven functions.

You can activate or deactivate the

function in Basic Settings menu.

AUTOMATIC PROGRAMMES

Automatic programmes

These 3 automatic programmes give opti-

mum settings for each type of meat or oth-

er recipes:

• Meat programmes with Weight Automat-

ic ( Assisted Cooking menu)

• Meat programmes with Meatprobe Auto-

matic ( Assisted Cooking menu)

• Recipe Automatic ( Assisted Cooking

menu)

12 electrolux

Assisted Cooking with Weight

Automatic

This function automatically calculates the

roasting time. To use the function, It is nec-

essary to input the food weight.

Activating the function:

1. Activate the appliance.

2. Select Assisted Cooking . Touch OK to

confirm.

3. Select the category and dish. Touch OK

to confirm.

4. Select the Weight Automatic . Touch

OK to confirm.

5. Touch + or - to set the food weight.

Touch OK to confirm.

The automatic program starts. You can

change the weight at any time. Touch + or

- to change the weight. When time ends,

an acoustic signal sounds. Touch a sensor

field to deactivate the signal.

With poultry programmes turn over the

food after 30 minutes. The display

shows a reminder.

Assisted Cooking with Recipe

Automatic

This appliance has a set of recipes you can

use. Recipes are fixed and you cannot

change them.

Activating the function:

1. Activate the appliance.

2. Select Assisted Cooking menu. Touch

OK to confirm.

3. Select the category and dish. Touch OK

to confirm.

4. Select the Recipe Automatic . Touch

OK to confirm.

When you set the option Manual , the

display shows automatic settings but

you can change them.

Assisted Cooking with Meatprobe

Automatic

1. Activate the appliance.

Touch

or to set the function As-

sisted Cooking , the necessary category

and the dish.

Touch

or to set the function

Meatprobe Automatic .

4. Touch OK to confirm.

The display shows „ Meatprobe “.

5. Install the meat probe.

When the programme ends, an acoustic

signal sounds.

Use a sensor field to deactivate the

acoustic signal.

6. Remove the meat probe.

Warning! The meat probe is hot! Risk

of burns! Be careful when you remove

the tip and plug of the meat probe.

My Programmes menu

You can store your favourite settings like

duration, temperature or oven function.

They are available in My Programmes

menu. You can store 20 programmes.

Storing a programme

1. Activate the appliance.

2. Select the oven function or Assisted

Cooking function.

Touch

again and again until the dis-

play shows " SAVE ". Touch OK to con-

firm.

4. The display shows the first free memory

position.

Touch OK to confirm.

5. The first letter flashes.

Touch + or - to change the letter. Touch

OKto confirm.

Touch

or to move the cursor to

the right or to the left. Touch OK to con-

firm.

The letter flashes.

7. Repeat steps 5 and 6 again to write

name of the program.

Touch and hold OK to save.

You can overwrite a memory position in

storage. (Refer to the section „Storing a

programme“. At step 4 touch

to choose memory position you want

to overwrite.)

You can change the name of a Pro-

gramme in the menu ” Edit Programme

Name ”.

Activating the programme

1. Activate the appliance.

2. Select My Programmes menu. Touch

OK to confirm.

3. Select your favourite programme name.

Touch OK to confirm.

electrolux 13

USING THE ACCESSORIES

Meatprobe

Meat probe measures the core temperature

of the meat. When the meat reaches set

temperature the oven deactivates automati-

cally.

There are two temperatures to be set

• The oven temperature

• The core temperature

Important! Only use the meat probe

supplied or genuine replacement parts.

1. Activate the appliance.

2. Put the tip of the meat probe into the

centre of the meat.

3. Put the plug of the meat probe into the

socket on the side wall of the oven.

The display shows Meatprobe .

4. Touch + or - in less than 5 seconds to

set the core temperature.

5. Set the oven function and, if necessary,

the oven temperature.

The appliance calculates the provisional

end time for the set temperature (at

least 120°C) again and again. This pro-

cedure can take approximately 30 mi-

nutes. The display constantly shows the

new provisional end time.

The meatprobe must stay in the meat

and in the meatprobe socket during the

cooking process.

6. When the meat reaches set core tem-

perature, an acoustic signal sounds.

The appliance deactivates automatically.

Use a sensor field to stop the signal.

7. Remove the meatprobe plug from the

socket and remove the meat from the

oven.

Warning! The meat probe is hot! There

is the risk of burns! Be careful when

you remove the tip and plug of the

meat probe.

8. Switch off the appliance.

For meat programmes with the meatp-

robe , refer to automatic programmes .

The core temperature is displayed from

30°C.

Heatable drawer

You can pre-heat cookware in the drawer.

Use

to activate the heatable drawer.

The display shows

Put the cookware equally in the draw-

er. Re-arrange after half of the warming

time (swap top and bottom).

The temperature regulates automatical-

ly.

Use

to deactivate the heatable draw-

er.

goes off the display.

Inserting the oven accessories

Put in the slide-in accessories so that the

double side edges are at the back of the

oven and point down to the bottom. Push

the slide-in accessories between the guide-

bars of one of the oven levels.

14 electrolux

The deep roasting pan and the oven

shelf have double side edges. These

edges and the shape of the guide-bars

causes the anti-tilt safety for the oven

accessories.

Inserting the oven shelf and deep

roasting pan together

Put the oven shelf on the deep roasting

pan. Push the deep roasting pan between

the guide-bars of one of the oven levels.

ADDITIONAL FUNCTIONS

Key Lock

The Key Lock prevents an accidental

change of the oven function .

Activating the Key Lock

1. Activate the appliance.

2. Set the oven function.

Touch

again and again until the dis-

play shows Key Lock

4. Touch OK to confirm.

The Key Lock is active.

Deactivating the Key Lock

Touch

2. Touch OK to confirm.

The Key Lock is not active.

If you deactivate the appliance, the Key

Lock deactivates.

Child Lock

The Child Lock prevents an accidental op-

eration of the appliance .

Activating the Child Lock

1. Deactivate the appliance.

Press

and - at the same time until

the display shows a message.

Deactivating the Child Lock

1. Do the above steps again.

Cooling fan

When the appliance operates, the cooling

fan switches on automatically to keep the

surfaces of the appliance cool. If you switch

off the appliance, the cooling fan continues

to operate until the appliance cools down.

The automatic switch-off

If you do not change the temperature

or stop the oven after some time, the

oven stops automatically.

The last temperature set flashes in the

display.

The oven stops with the temperature

of:

• 30 - 120° C after 12.5 hours

• 120 - 200° C after 8.5 hours

• 200 - 230° C after 5.5 hours

Using the oven after an automatic

switch-off

Use

electrolux 15

CARE AND CLEANING

Warning! Refer to "Safety information"

chapter.

• Clean the front of the appliance with a

soft cloth with warm water and cleaning

agent.

• To clean metal surfaces use a usual

cleaning agent

• Clean the oven interior after each use.

Thus you can remove dirt more easily

and it does not burn on.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all oven accessories (with a soft

cloth with warm water and cleaning

agent) after each use and let them dry.

• If you have nonstick accessories, do not

clean them using an aggressive agents,

sharp edged objects or dishwasher. It

can destroy nonstick coating!

Steam Cleaning

1. Place water (approximately 150 ml) and

1 tablespoon of vinegar directly into the

steam generator.

Use

or to open Cleaning Menu .

Use

to confirm.

Use

or to open Steam Cleaning .

Use

to confirm.

The oven starts to heat-up and the dis-

play shows the duration of the process

(15 minuts).

6. You can hear an acoustic signal when

the programme is completed.

Use any button to switch off the acous-

tic signal.

7. Wipe out the oven with a soft cloth.

Remove water from the steam genera-

tor with the Quick Sponge and rub dry.

Keep the door open for approxi-

mately 1 hour to let the oven dry

fully.

Cleaning assistant

Cleaning Assistant tells you the steps to op-

erate Steam Cleaning .

Activate and deactivate the Cleaning Assis-

tant in the CLEANING MENU .

Shelf support rails

You can remove the shelf support rails to

clean the side walls.

Removing the shelf support rails

1. Carefully pull the rail up and out of the

front catch.

2. Lightly move the rail on the front catch

inwards.

3. Pull the rail out of the rear catch.

Installing the shelf support rails

Install the shelf support rails in the opposite

sequence.

16 electrolux

Steam generation system

Caution! Dry the steam generator after

each use. Soak up water with the

Quick sponge.

Remove a lime residue with water and

vinegar.

Caution! Chemical de-scaling agents

can damage the oven enamel. Obey

instructions of the manufacturer!

Water drawer and steam generator

1. Fill the water and vinegar mixture (ap-

proximately 250 ml) through the water

drawer in the steam generator.

Let to operate for approximately 10 mi-

nutes.

2. Remove the water and vinegar with a

soft sponge.

3. Use clean water (100-200 ml) to flush

the steam generation system through

the water drawer.

4. Remove water from the steam genera-

tor with the sponge and rub dry.

5. Keep the door open to let the oven dry

fully.

Replacing the rear oven light bulb/cleaning

the glass cover

1. Turn the glass cover anti-clockwise to

remove it.

2. Remove seals and metal ring, and clean

the glass cover.

3. Replace the oven light bulb with appli-

cable 300°C heat-resistant oven light

bulb.

4. Fit seals and metal ring to the glass cov-

er.

5. Install the glass cover.

Replacing the oven lamp (left side of

the appliance)

Cleaning the glass cover

1. Remove the left shelf support rail.

2. Use a cross-tip screwdriver to remove

the glass cover.

3. Take off the metal frame and seal and

clean.

4. If necessary: Replace the oven lamp.

Technical data: 25 Watt, 230 V, heat re-

sistant.

5. Install metal frame and seal and tighten

screws.

6. Install the left shelf support rail.

Oven door

To clean the oven door remove it.

Caution! Be careful when you remove

the door from the appliance. The door

is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two

door hinges fully.

3. Close the oven door until the first posi-

tion (angle approximately 45°).

45°

4. Hold of the oven door with one hand on

each side and pull it away from the oven

at an upwards angle.

Put the oven door with the outer side

down on a soft and level surface to

prevent scratches.

electrolux 17

Hanging the oven door back on its hinges

1. Hold of the oven door with one hand on

each side and hold at an angle of ap-

proximately 45°.

Position the recesses on the bottom of

the oven door on the hinges on the

oven.

Let the door slide down as far as it will

go.

2. Open the oven door as far as it goes.

3. Fold down the clamping levers (A) on

the both door hinges back into their

original positions.

4. Close the oven door.

WHAT TO DO IF…

Warning! Refer to "Safety information"

chapter.

Problem Possible cause Remedy

The oven does not heat

The oven is switched off Activate the oven

The oven does not heat

The clock is not set Set the clock

The oven does not heat

The necessary settings are not set Check the settings

The oven does not heat

The Child Lock is activated Refer to "Deactivating the Child

Lock"

The oven does not heat

The fuse is released Make sure, if the fuse is the cause

for the malfunction. If the fuse re-

leases again and again, refer to an

authorized electrician

The display shows F11 The meat probe plug is not cor-

rectly installed into the meat probe

socket

Install the meat probe plug as far

as possible

The oven lamp does not

operate

The oven lamp is defective Refer to "Replace the oven lamp"

18 electrolux

Problem Possible cause Remedy

A fault code that is not

listed above appears in

the clock display

Electronic fault Deactivate and activate the appli-

ance again via the house fuse or

the safety switch in the fuse box. If

the fault code is appeared again,

please contact the Customer Care

Department

If you cannot find a solution to the problem

yourself, contact your dealer or the service

centre.

The necessary data for the service centre is

on the rating plate. The rating plate is on

the front frame of the oven cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

INSTALLATION INSTRUCTIONS

Warning! Refer to "Safety information"

chapter.

Installing the oven

Warning! Installation into flammable

material must agree with NIN 2005,

chapter 4.2.2 of the VKF (Swiss

Association of the Cantonal Fire

Insurance Companies) fire protection

guidelines and regulations.

435

170

105

A 757

N 762

A 567

N 605

A 548

N 550

5 / 6 = 635

6 / 6 = 762

ca.50

A = appliance

N = recess

1. Pull the appliance drawer out as far as it

goes and remove it.

2. Slide the oven flush into the recess.

Caution! Make sure the cable is free

when you move the appliance.

3. Use a minimum of 2 screws to attach

the oven on the 2 sides (Detail A).

Installing the oven under a work

surface

Warning! Installation into flammable

material must agree with NIN 2005,

chapter 4.2.2 of the VKF (Swiss

Association of the Cantonal Fire

Insurance Companies) fire protection

guidelines and regulations.

electrolux 19

A = appliance

N = recess

1. Pull the appliance drawer out as far as it

goes and remove it.

2. Use the side handles to hold the oven

and slide it flush into the recess.

Caution! Make sure the cable is free

when you move the appliance.

3. Use a minimum of 2 screws to attach

the oven on the 2 sides (Detail A).

Warning! When installing next to a

wood-fuelled boiler, a heatproof and

heat-insulating plate must be mounted

at the height of the appliance and at

least 30 cm deep.

To secure it, you can bore 2 x 2.8 mm

holes at the top where the indents are

provided (detail C).

Electrical connection

Important! Let a qualified electrician

connect the appliance to the electricity

supply.

Use a power cable of the type H05VV-F or

higher.

Install the appliance with a socket supply

line. If there is no socket supply line, the

fixed home electrical system must include

an isolating device with at least a 3 mm-

contact separation to enable a simultane-

ous and all-pole cut off from the mains (ac-

cording to NIN 2000). The customer must

have a socket for the electrical connection

that is accessible and outside the coordina-

tion room. The length of the connection ca-

ble must be approximately 120 cm with

lines connected directly to the mains.

1. Open the terminal box (detail D).

2. Open the catch on the cord grip (detail

E).

3. Connect the terminal as in the connec-

tion diagram.

4. Press the catch (detail F). The cord grip

is safely attached.

5. Close the terminal box.

20 electrolux

Page is loading ...

Electrolux EBSL7CN User manual

Brand: Electrolux

Model: EBSL7CN

Category: Ovens

Type: User manual

This manual is also suitable for

Download PDF

report

Electrolux EBSL7CN User manual

This manual is also suitable for

Electrolux EBSL7CN User manual

Related papers

Other documents