Brother Sewing Machine 882-W07 User manual

Be sure to read this manual and the addendum before using the machine.

We recommend that you keep these documents nearby for future reference.

Operation Manual

Embroidery and Sewing Machine

Product Code: 882-W07

Trademarks

FlashFX

®

is a registered trademark of Datalight, Inc.

FlashFX

®

U.S.Patent Office 5,860,082/6,260,156

FlashFX

®

Pro™ is a trademark of Datalight, Inc.

Datalight

®

is a registered trademark of Datalight, Inc.

Video powered by Mobiclip™ encoding and playback technology.

IMPORTANT:

READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.

By downloading, copying, installing or using the software you agree to this license. If you do not agree

to this license, do not download, install, copy or use the software.

Intel License Agreement For Open Source Computer Vision Library

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the

following conditions are met:

• Redistribution’s of source code must retain the above copyright notice, this list of conditions and the following

disclaimer.

• Redistribution’s in binary form must reproduce the above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other materials provided with the distribution.

• The name of Intel Corporation may not be used to endorse or promote products derived from this software

without specific prior written permission.

This software is provided by the copyright holders and contributors “as is” and any express or implied warranties,

including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are

disclaimed. In no event shall Intel or contributors be liable for any direct, indirect, incidental, special, exemplary,

or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use,

data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict

liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if

advised of the possibility of such damage.

All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice.

Secure Digital (SD) Card is a registered trademark or a trademark of SD Card Association.

CompactFlash is a registered trademark or a trademark of Sandisk Corporation.

Memory Stick is a registered trademark or a trademark of Sony Corporation.

SmartMedia is a registered trademark or a trademark of Toshiba Corporation.

MultiMediaCard (MMC) is a registered trademark or a trademark of Infineon Technologies AG.

xD-Picture Card is a registered trademark or a trademark of Fuji Photo Film Co. Ltd.

IBM is a registered trademark or a trademark of International Business Machines Corporation.

Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft Corporation.

“Adobe” and “Adobe Reader” are either registered trademarks or trademarks of Adobe Systems Incorporated in the

United States and/or other countries.

Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.

All other brands and product names mentioned in this manual are registered trademarks of their respective companies. However, the

explanations for markings such as ® and ™ are not clearly described within the text.

INTRODUCTION

1

INTRODUCTION

Thank you for purchasing this embroidery and sewing machine. Before using this machine, carefully read

the “IMPORTANT SAFETY INSTRUCTIONS”, and then study this manual for the correct operation of the

various functions.

In addition, after you have finished reading this manual, store it where it can quickly be accessed for

future reference.

IMPORTANT SAFETY INSTRUCTIONS

Please read these safety instructions before attempting to use the machine.

DANGER - To reduce the risk of electric shock

1Always unplug the machine from the electrical outlet immediately after using, when cleaning, when making any

user servicing adjustments mentioned in this manual, or if you are leaving the machine unattended.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to

persons.

2Always unplug the machine from the electrical outlet when removing covers, or when making any adjustments

mentioned in the instruction manual.

• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp the plug and pull

it out of the electrical outlet. Do not pull on the cord.

• Plug the machine directly into the electrical outlet. Do not use an extension cord.

• Always unplug your machine if the power is cut.

3Electrical Hazards:

• This machine should be connected to an AC power source within the range indicated on the rating label. Do not

connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a

qualified electrician.

• This machine is approved for use in the country of purchase only.

4Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped

or damaged, or water is spilled on the unit. Return the machine to the nearest authorized dealer for examination,

repair, electrical or mechanical adjustment.

• While the machine is stored or in use if you notice anything unusual, such as an odor, heat, discoloration or

deformation, stop using the machine immediately and unplug the power cord.

• When transporting the sewing machine, be sure to carry it by its handle. Lifting the sewing machine by any other

part may damage the machine or result in the machine falling, which could cause injuries.

• When lifting the sewing machine, be careful not to make any sudden or careless movements, otherwise you may

injure your back or knees.

IMPORTANT SAFETY INSTRUCTIONS

2

5Always keep your work area clear:

• Never operate the machine with any air openings blocked. Keep ventilation openings of the sewing machine and

foot control free from the build up of lint, dust, and loose cloth.

• Do not store objects on the foot controller.

• Do not use extension cords. Plug the machine directly into the electrical outlet.

• Never drop or insert any object into any opening.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

• Do not use the machine near a heat source, such as a stove or iron; otherwise, the machine, power cord or

garment being sewn may ignite, resulting in fire or an electric shock.

• Do not place this sewing machine on an unstable surface, such as an unsteady or slanted table, otherwise the

sewing machine may fall, resulting in injuries.

6Special care is required when sewing:

• Always pay close attention to the needle. Do not use bent or damaged needles.

• Keep fingers away from all moving parts. Special care is required around the machine needle.

• Switch the sewing machine to the symbol “O” position to turn it off when making any adjustments in the needle

area.

• Do not use a damaged or incorrect needle plate, as it could cause the needle to break.

• Do not push or pull the fabric when sewing, and follow careful instruction when free motion stitching so that

you do not deflect the needle and cause it to break.

7This machine is not a toy:

• Your close attention is necessary when the machine is used by or near children.

• The plastic bag that this sewing machine was supplied in should be kept out of the reach of children or disposed

of. Never allow children to play with the bag due to the danger of suffocation.

• Do not use outdoors.

8For a longer service life:

• When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store the machine

near a space heater, iron, halogen lamp, or other hot objects.

• Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders can damage the

case and machine, and should never be used.

• Always consult the operation manual when replacing or installing any assemblies, the presser feet, needle, or

other parts to assure correct installation.

9For repair or adjustment:

• If the light unit is damaged, it must be replaced by an authorized dealer.

• In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of

the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your

local authorized Brother dealer.

IMPORTANT SAFETY INSTRUCTIONS

3

Use this machine only for its intended use as described in the manual.

Use accessories recommended by the manufacturer as contained in this manual.

Use only the interface cable (USB cable) included with this machine.

Use only the USB mouse included with this machine.

Use only the pen tablet included with this machine.

The contents of this manual and specifications of this product are subject to change without notice.

For additional product information and updates, visit our website at www.brother.com

SAVE THESE INSTRUCTIONS

This machine is intended for household use.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

FOR USERS IN THE UK, EIRE, MALTA

AND CYPRUS ONLY

IMPORTANT

• In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the mark,

rating as marked on plug.

• Always replace the fuse cover. Never use plugs with the fuse cover omitted.

• If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact your

authorized dealer to obtain the correct lead.

IMPORTANT SAFETY INSTRUCTIONS

4

Federal Communications Commission (FCC)

Declaration of Conformity (For USA Only)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• The included interface cable should be used in order to ensure compliance with the limits for a Class B digital

device.

• Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s authority to

operate the equipment.

Responsible Party: Brother International Corporation

200 Crossing Boulevard

P.O. Box 6911

Bridgewater, NJ 08807-0911 USA

TEL : (908) 704-1700

declares that the product

Product Name:

Model Number:

Brother Sewing Machine

NV6750D

IMPORTANT SAFETY INSTRUCTIONS

5

WARNING LABEL

The following warning label is on the included side cutter. Be sure to observe the precaution.

Label location

CAUTION

• When using the side cutter, sew between low and mid-speed and do not touch the knives or

operation lever of the side cutter while sewing to avoid equipment damage or injury.

a Guide plate (lower knife)

b Upper knife

c Operation lever

6

OUTSTANDING FEATURES

Display the Fabric While

Aligning the Embroidering

Position

The fabric hooped in the embroidery frame can be

displayed on the LCD so that the embroidery

position can be easily aligned.

This feature allows you to easily combine patterns

while checking the final image.

See “Display the Fabric While Aligning the

Embroidering Position” on page 211.

Change the Pattern Size While

Maintaining the Desired Thread

Density (Stitch Recalculator)

In the embroidery edit screen, the size of the

pattern can be changed while the desired thread

density is maintained.

With this function, the pattern will be enlarged or

reduced at a larger ratio than with normal pattern

resizing.

See “Changing the Pattern Size While Maintaining

the Desired Thread Density (Stitch Recalculator)”

on page 270.

Expand Your Creativity With

Bobbin Work

Example with decorative stitches

You can create bobbin work, which gives a three-

dimensional appearance to the surface of the

fabric, by winding the bobbin with heavy weight

thread or ribbon too thick to be fed through the

sewing machine needle and sewing on the wrong

side of the fabric.

Bobbin work is sewn using the special bobbin case

(gray) included with this machine.

See “How to Create Bobbin Work” on page 307.

Multi-Function Foot Controller

Allows You Easy Sewing

The multi-function foot controller allows you

various sewing machine operations in addition to

starting/stopping sewing, such as thread cutting

and reverse stitching, can be specified to be

performed. See Operation Manual Addendum.

7

Find New Color Schemes With

the Color Shuffling Function

With the color shuffling function, the machine

suggests new color schemes for the embroidery

pattern that you have selected. After you select the

desired effect from one of the four available color

schemes (“RANDOM”, “VIVID”, “GRADIENT”

and “SOFT”) the sample for the selected effect is

displayed.

See “Find New Color Schemes With the Color

Shuffling Function” on page 283.

LED Pointer Shows You the

Needle Drop Position

Included Embroidery foot with LED pointer

indicates the needle position with a red LED point.

The LED pointer shows you the location of the

needle penetration so that it is easier to adjust the

embroidery position.

See “Attaching Embroidery Foot “W2”” on

page 186 of this guide, and Operation Manual

Addendum.

Create Patterns With My Custom

Design

Any image that you draw in the LCD screen area

of your machine can immediately become an

embroidery pattern. Specify colors and sewing

settings as you desire.

Compose embroidery from children’s drawings or

of your signature to add to your original artwork.

This is a function that everyone will enjoy using.

The included pen tablet makes this function even

easier to use.

Refer to the instruction manual (PDF format) stored

in the My Custom Design CD.

Easily Perform My Custom

Design Operations With the

Included Pen Tablet

The included pen tablet can be used to perform

My Custom Design operations effectively, along

with normal screen operations. Since the range of

operation with the pen tablet is wider than the

machine’s LCD screen, you can easily perform

intricate procedures.

See “Using the Pen Tablet” on page 23 and “Using

the Pen Tablet” on page 34.

8

WHAT YOU CAN DO WITH THIS MACHINE

Getting Ready

To learn the operation of the principal parts and the

screens

Sewing Basics

To learn how to prepare for sewing and basic sewing

operations

Chapter 1

Page 25

Chapter 2

Page 71

Utility Stitches

Pre-programmed with more than 100 frequently used

stitches

Character/Decorative

Stitches

The variety of stitches widen your creativity

Chapter 3

Page 89

Chapter 4

Page 155

Embroidery

Maximum 30 cm × 20 cm (approx. 12 × 8 inches) for

large embroidery designs

Embroidery Edit

Designs can be combined, rotated or enlarged

Chapter 5

Page 185

Chapter 6

Page 263

How to Create Bobbin

Work

To learn how to create bobbin work

My Custom Stitch

Create original decorative stitches

Chapter 7

Page 307

Chapter 8

Page 325

Appendix

Caring for your machine and dealing with errors and

malfunctions

Chapter 9

Page 337

9

HOW TO USE THIS MANUAL

Chapter 1 and Chapter 2 explain your sewing machine’s basic operation procedures for someone who is

using the sewing machine for the first time. If you want to sew utility stitches or character/ decorative

stitches, read Chapter 1 and Chapter 2, then go on to Chapter 3 (Utility Stitches) or Chapter 4 (Character/

Decorative Stitches).

When you are ready to begin using the embroidery function after reading Chapter 1 and Chapter 2,

proceed to Chapter 5 (Embroidery). Once you understand the steps explained in Chapter 5, go on to

Chapter 6 (Embroidery Edit) for an explanation about the embroidery edit functions.

In the screens appearing in the step-by-step instructions, the parts referred to in the operations are marked

with . Compare the screen in the directions with the actual screen, and carry out the operation.

If, while using the machine, you experience something you do not understand, or there is a function you

would like to know more about, refer to the index at the back of the operation manual in conjunction

with the table of contents to find the section of the manual you should refer to.

To sew utility stitches

To sew character or

decorative stitches

To do machine

embroidery

Chapter 1 Chapter 2

Chapter 3

Chapter 4

Chapter 1 Chapter 2 Chapter 5 Chapter 6

CONTENTS

10

CONTENTS

INTRODUCTION..................................................1

IMPORTANT SAFETY INSTRUCTIONS .................1

OUTSTANDING FEATURES ..................................6

WHAT YOU CAN DO WITH THIS MACHINE ......8

HOW TO USE THIS MANUAL ..............................9

NAMES OF MACHINE PARTS AND THEIR

FUNCTIONS .........................................................13

Machine................................................................................13

Needle and Presser Foot Section ...........................................14

Embroidery Unit....................................................................15

Operation Buttons .................................................................15

Using the Flat Bed Attachment ..............................................16

Using the Accessory Case......................................................16

Storing Bobbin Clips..............................................................17

Using the Embroidery Unit Carrying Case .............................17

Included Accessories.............................................................17

Options.................................................................................20

Using the Spool Stand ...........................................................21

Using the Pen Tablet .............................................................23

Chapter 1 Getting Ready 25

TURNING THE MACHINE ON/OFF....................26

LCD SCREEN .......................................................28

USB Connectivity ..................................................................32

Using the Machine Setting Mode Key ...................................35

Using the Sewing Machine Help Key ...................................44

Using the Operation Guide Function.....................................45

Using the Sewing Guide Function .........................................46

Using the Pattern Explanation Function .................................47

LOWER THREADING ..........................................48

Winding the Bobbin ..............................................................48

Setting the Bobbin .................................................................54

Pulling Up the Bobbin Thread ...............................................55

UPPER THREADING............................................57

Upper Threading ...................................................................57

Using the Twin Needle Mode................................................60

Using the Spool Stand ...........................................................63

Using Threads that Unwind Quickly .....................................64

CHANGING THE PRESSER FOOT .......................65

Removing the Presser Foot ....................................................65

Attaching the Presser Foot .....................................................65

Attaching the Walking Foot ...................................................66

CHANGING THE NEEDLE...................................67

About the Needle ..................................................................69

Fabric/Thread/Needle Combinations .....................................69

Chapter 2 Sewing Basics 71

SEWING ..............................................................72

Sewing a Stitch......................................................................72

Sewing Reinforcement Stitches..............................................74

Sewing Curves.......................................................................74

Changing Sewing Direction...................................................75

Sewing Heavyweight Fabrics.................................................75

Sewing Hook-and-Loop Fastener...........................................76

Sewing Lightweight Fabrics ...................................................76

Sewing Stretch Fabrics...........................................................77

STITCH SETTINGS...............................................78

Setting the Stitch Width .........................................................78

Setting the Stitch Length ........................................................79

Setting the Thread Tension ....................................................79

USEFUL FUNCTIONS..........................................81

Automatic Reinforcement Stitching .......................................81

Automatic Thread Cutting .....................................................82

Using the Knee Lifter .............................................................83

Pivoting.................................................................................84

Automatic Fabric Sensor System (Automatic Presser Foot

Pressure) ............................................................................... 85

Needle Position – Stitch Placement....................................... 86

Locking the Screen ............................................................... 86

Checking the Needle Location in the Screen......................... 87

Chapter 3 Utility Stitches 89

SELECTING UTILITY STITCHES .......................... 90

Selecting a Stitch .................................................................. 91

Saving Your Stitch Settings.................................................... 92

SEWING THE STITCHES ..................................... 94

Straight Stitches .................................................................... 94

Dart Seam............................................................................. 99

Gathering ............................................................................. 99

Flat Fell Seam ..................................................................... 100

Pintuck ............................................................................... 101

Zigzag Stitches.................................................................... 102

Elastic Zigzag Stitches......................................................... 104

Overcasting ........................................................................ 105

Quilting .............................................................................. 110

Blind Hem Stitches ............................................................. 122

Appliqué............................................................................. 125

Shelltuck Stitches................................................................ 126

Scallop Stitches................................................................... 127

Crazy Quilting .................................................................... 127

Smocking Stitches............................................................... 128

Fagoting.............................................................................. 128

Tape or Elastic Attaching .................................................... 129

Heirloom............................................................................ 130

One-step Buttonholes ......................................................... 132

Four-step Buttonholes ......................................................... 136

Bar Tacks............................................................................ 140

Button Sewing .................................................................... 142

Eyelet.................................................................................. 144

Multi-directional Sewing (Straight Stitch and Zigzag Stitch)

..... 145

Zipper Insertion .................................................................. 146

Edge Sewing ....................................................................... 148

Chapter 4 Character/Decorative Stitches 155

SELECTING STITCH PATTERNS ........................ 156

Selecting Decorative Stitch Patterns/7mm Decorative Stitch

Patterns/Satin Stitch Patterns/7mm Satin Stitch Patterns/

Cross Stitch/Utility Decorative Stitch Patterns ..................... 158

Alphabet Characters ........................................................... 158

SEWING STITCH PATTERNS ............................ 161

Sewing Attractive Finishes .................................................. 161

Basic Sewing ...................................................................... 161

Making Adjustments ........................................................... 162

EDITING STITCH PATTERNS............................ 164

Changing the Size............................................................... 166

Changing the Length (for 7mm Satin Stitch Patterns Only)

.... 166

Creating a Vertical Mirror Image......................................... 166

Creating a Horizontal Mirror Image .................................... 167

Sewing a Pattern Continuously ........................................... 167

Changing Thread Density (for Satin Stitch Patterns Only) .... 167

Returning to the Beginning of the Pattern............................ 168

Checking the Image ............................................................ 168

COMBINING STITCH PATTERNS..................... 170

Before Combining............................................................... 170

Combining Various Stitch Patterns ...................................... 170

Combining Large and Small Stitch Patterns ......................... 171

Combining Horizontal Mirror Image Stitch Patterns ............ 172

Combining Stitch Patterns of Different Length..................... 173

Making Step Stitch Patterns (for 7mm Satin Stitch Patterns Only)

..... 174

USING THE MEMORY FUNCTION .................. 176

Stitch Data Precautions....................................................... 176

Saving Stitch Patterns in the Machine’s Memory ................. 177

Saving Stitch Patterns to USB Media ................................... 178

CONTENTS

11

1

2

3

4

5

6

7

8

9

Saving Stitch Patterns in the Computer................................ 179

Retrieving Stitch Patterns from the Machine’s Memory........ 180

Recalling from USB Media.................................................. 181

Recalling from the Computer .............................................. 182

Chapter 5 Embroidery 185

BEFORE EMBROIDERING .................................186

Embroidery Step by Step ..................................................... 186

Attaching Embroidery Foot “W2”........................................ 186

Attaching the Embroidery Unit............................................ 188

SELECTING PATTERNS......................................190

Selecting Embroidery Patterns/Brother “Exclusives”/

Greek Alphabet Patterns/Floral Alphabet Patterns/

Utility Embroidery Patterns ................................................. 193

Selecting Alphabet Character Patterns................................. 194

Selecting Frame Patterns ..................................................... 196

Selecting Patterns from Embroidery Cards ........................... 197

Selecting Patterns from USB Media/Computer..................... 197

VIEWING THE SEWING SCREEN......................198

PREPARING THE FABRIC..................................200

Attaching Iron-on Stabilizers (Backing) to the Fabric ........... 200

Hooping the Fabric in the Embroidery Frame ...................... 202

Embroidering Small Fabrics or Fabric Edges ........................ 205

ATTACHING THE EMBROIDERY FRAME..........206

CONFIRMING THE PATTERN POSITION.........208

Aligning the Embroidering Position Using the Built-In Camera

...... 208

Display the Fabric While Aligning the Embroidering Position

..... 211

Using the Built-In Camera to Align the Embroidering Position

.... 213

Checking the Pattern Position ............................................. 216

Previewing the Completed Pattern ...................................... 217

SEWING AN EMBROIDERY PATTERN ..............218

Sewing Attractive Finishes................................................... 218

Sewing Embroidery Patterns................................................ 219

Sewing Embroidery Patterns Which Use Appliqué .............. 221

PRINT AND STITCH (COMBINING

EMBROIDERY PATTERNS AND PRINTED

DESIGNS) .........................................................223

Selecting a Pattern .............................................................. 224

Outputting the Background Image and Positioning Image ... 225

Printing the Background and Embroidery Position Sheet ..... 226

Sewing Embroidery Patterns................................................ 227

ADJUSTMENTS DURING THE EMBROIDERY

PROCESS ............................................................229

If the Bobbin Runs Out of Thread........................................ 229

If the Thread Breaks During Sewing .................................... 230

Restarting from the Beginning ............................................. 231

Resuming Embroidery After Turning Off the Power ............. 231

MAKING EMBROIDERY ADJUSTMENTS ..........233

Adjusting Thread Tension ................................................... 233

Adjusting the Alternate Bobbin Case (with No Color on the

Screw)................................................................................. 234

Using the Automatic Thread Cutting Function

(END COLOR TRIM)........................................................... 235

Using the Thread Trimming Function (JUMP STITCH TRIM)

.... 236

Adjusting the Embroidery Speed ......................................... 237

Changing the Thread Color Display .................................... 237

Changing the Embroidery Frame Display ............................ 238

REVISING THE PATTERN ..................................240

Moving the Pattern.............................................................. 240

Aligning the Pattern and the Needle.................................... 240

Changing the Size of the Pattern ......................................... 241

Rotating the Pattern............................................................. 242

Creating a Horizontal Mirror Image .................................... 243

Changing the Density (Alphabet Character and Frame

Patterns Only) ..................................................................... 244

Changing the Colors of Alphabet Character Patterns ........... 245

Embroidering Linked Characters ......................................... 245

Uninterrupted Embroidering (Using a Single Color)............. 248

USING THE MEMORY FUNCTION...................249

Embroidery Data Precautions.............................................. 249

Saving Embroidery Patterns in the Machine’s Memory ........ 251

Saving Embroidery Patterns to USB Media...........................252

Saving Embroidery Patterns in the Computer .......................253

Retrieving Patterns from the Machine’s Memory..................254

Recalling from USB Media ..................................................255

Recalling from the Computer...............................................256

EMBROIDERY APPLICATIONS ......................... 258

Using a Frame Pattern to Make an Appliqué (1)...................258

Using a Frame Pattern to Make an Appliqué (2)...................259

Sewing Split Embroidery Patterns ........................................261

Chapter 6 Embroidery Edit 263

EXPLANATION OF FUNCTIONS...................... 264

SELECTING PATTERNS TO EDIT ...................... 265

Selecting Embroidery Patterns/Brother “Exclusives”/

Greek Alphabet Patterns/Floral Alphabet Patterns/

Utility Embroidery Patterns/Frame Patterns ..........................266

Selecting Alphabet Character Patterns .................................266

EDITING PATTERNS ......................................... 268

Moving the Pattern ..............................................................270

Rotating the Pattern .............................................................270

Changing the Size of the Pattern..........................................270

Changing the Pattern Size While Maintaining the Desired

Thread Density (Stitch Recalculator)....................................270

Deleting the Pattern.............................................................272

Displaying Patterns in the Screen Magnified by 200%.........272

Changing the Configuration of Alphabet Character Patterns

.....273

Changing Alphabet Character Spacing ................................273

Reducing Character Spacing................................................274

Separating Combined Character Patterns.............................275

Changing the Color of Each Alphabet Character in a Pattern

....276

Embroidering Linked Characters ..........................................277

Changing the Thread Color .................................................277

Creating a Custom Thread Table .........................................278

Choosing a Color from the Custom Thread Table ................282

Find New Color Schemes With the Color Shuffling Function

......283

Designing Repeated Patterns ...............................................285

Embroidering the Pattern Repeatedly...................................291

Duplicating a Pattern...........................................................293

After Editing ........................................................................294

COMBINING PATTERNS .................................. 295

Editing Combined Patterns ..................................................295

Sewing Combined Patterns..................................................298

VARIOUS EMBROIDERING FUNCTIONS ........ 299

Uninterrupted Embroidering (Using a Single Color) .............299

Basting Embroidery .............................................................299

Creating an Appliqué Piece .................................................300

USING THE MEMORY FUNCTION .................. 306

PRINT AND STITCH (COMBINING

EMBROIDERY PATTERNS AND PRINTED

DESIGNS) ........................................................ 306

Chapter 7 How to Create Bobbin Work 307

ABOUT BOBBIN WORK................................... 308

PREPARING FOR BOBBIN WORK.................... 309

Required Materials ..............................................................309

Upper Threading .................................................................310

Preparing the Bobbin Thread...............................................310

CREATING BOBBIN WORK (SEWING)............ 314

Positioning the Fabric and Sewing.......................................314

Bobbin Work Free Motion Sewing.......................................317

CREATING BOBBIN WORK (EMBROIDERY)

....... 318

Selecting the Pattern............................................................318

Start Embroidering...............................................................320

ADJUSTING THE THREAD TENSION............... 322

TROUBLESHOOTING ...................................... 323

Chapter 8 MY CUSTOM STITCH 325

DESIGNING A STITCH..................................... 326

ENTERING STITCH DATA ................................ 328

USING STORED CUSTOM STITCHES............... 334

CONTENTS

12

Storing Custom Stitches in Your List ....................................334

Retrieving Stored Stitches ....................................................335

Chapter 9 Appendix 337

CARE AND MAINTENANCE..............................338

Restrictions on oiling...........................................................338

Precautions on storing the machine.....................................338

Cleaning the LCD Screen ....................................................338

Cleaning the Machine Casing..............................................338

Cleaning the Race ...............................................................338

Cleaning the Cutter in the Bobbin Case Area.......................340

About the Maintenance Message.........................................341

ADJUSTING THE SCREEN.................................342

Adjusting the Brightness of the Screen Display ....................342

Touch Panel is Malfunctioning............................................342

TROUBLESHOOTING .......................................343

Frequent troubleshooting topics ..........................................343

Upper thread is too tight......................................................343

Tangled thread on wrong side of fabric ...............................344

Incorrect thread tension.......................................................346

Fabric is caught in the machine and cannot be removed .....347

List of Symptoms .................................................................350

ERROR MESSAGES ............................................354

SPECIFICATIONS ..............................................362

UPGRADING YOUR MACHINE’S SOFTWARE

.......363

Upgrade Procedure Using USB Media.................................363

Upgrade Procedure Using Computer...................................364

STITCH SETTING CHART..................................365

INDEX ...............................................................374

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

13

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

The names of the various parts of the sewing machine and their functions are described below. Before

using the sewing machine, carefully read these descriptions to learn the names of the machine parts.

Machine

■ Front View

a Top cover

Open the top cover to thread the machine and wind the bobbin.

b Pre-tension disk

Pass the thread around the pre-tension disk when winding the

bobbin thread. (page 48)

c Thread guide for bobbin winding

Pass the thread through this thread guide when winding the

bobbin thread. (page 48)

d Spool pin

Place a spool of thread on the spool pin. (page 57)

e Spool cap

Use the spool cap to hold the spool of thread in place. (page 57)

f Supplemental spool pin

Use this spool pin to wind the bobbin thread, or to sew with the

twin needle. (page 48, 60)

g Bobbin winder

Use the bobbin winder when winding the bobbin. (page 48)

h LCD (liquid crystal display)

Settings for the selected stitch and error messages appear in

the LCD. (page 28)

i Knee lifter

Use the knee lifter to raise and lower the presser foot. (page 83)

j Knee lifter slot

Insert the knee lifter into the slot. (page 83)

k Operation buttons (6 buttons) and sewing speed

controller

Use these buttons and the slide to operate the sewing machine.

(page 15)

l Flat bed attachment with accessory compartment

Store presser feet and bobbins in the accessory compartment

of the flat bed attachment. When sewing cylindrical pieces,

remove the flat bed attachment. (page 16)

m Thread cutter

Pass the threads through the thread cutter to cut them. (page

59)

n Thread guide plate

Pass the thread around the thread guide plate when threading

upper thread. (page 57)

■ Right-side/Rear View

a Handle

Carry the sewing machine by its handle when transporting the

machine.

b Presser foot lever

Raise and lower the presser foot lever to raise and lower the

presser foot. (page 65)

c Main power switch

Use the main power switch to turn the sewing machine ON and

OFF. (page 26)

d Multi-function foot controller

Various sewing machine operations can be programmed into

the multi-function foot controller. (Operation Manual

Addendum.)

e Power cord receptacle

Insert the power cord into the machine receptacle. (page 26)

f Air vent

The air vent allows the air surrounding the motor to circulate. Do

not cover the air vent while the sewing machine is being used.

g Foot controller jack and external port

Insert the foot controller plugs where indicated. (page 73,

Operation Manual Addendum)

h Speaker

i USB port for computer

In order to import/export patterns between a computer and the

machine, plug the USB cable into the USB port. (page 32, 179,

253)

j USB port for mouse (page 32)

k Primary (top) USB port for media

In order to send patterns from/to USB media, plug the USB

media directly into the USB port. (page 178, 252)

l Touch pen holder

Use the touch pen holder to hold the touch pen when not in use.

m Handwheel

Rotate the handwheel toward you (counterclockwise) to raise

and lower the needle. The wheel should be turned toward the

front of the machine.

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

14

Needle and Presser Foot Section

a Buttonhole lever

The buttonhole lever is used with the one-step buttonhole foot

to create buttonholes. (page 132)

b Presser foot holder

The presser foot is attached to the presser foot holder. (page

65)

c Presser foot holder screw

Use the presser foot holder screw to hold the presser foot in

place. (page 66)

d Presser foot

The presser foot consistently applies pressure to the fabric as

sewing takes place. Attach the appropriate presser foot for the

selected stitch. (page 65)

e Feed dogs

The feed dogs feed the fabric in the sewing direction.

f Bobbin cover

Open the bobbin cover to set the bobbin. (page 54, 103)

g Needle plate cover

Remove the needle plate cover to clean the race. (page 97,

219)

h Needle plate

The needle plate is marked with guides to help sew straight

seams. (page 96)

i Needle bar thread guide

Pass the upper thread through the needle bar thread guide.

(page 57)

j Needle clamp screw

Use the needle clamp screw to hold the needle in place. (page

66)

Measurements on the needle plate, bobbin cover

(with mark) and needle plate cover

The measurements on the bobbin cover are

references for patterns with a middle (center)

needle position. The measurements on the needle

plate and the needle plate cover are references for

stitches with a left needle position.

a For stitches with a middle (center) needle position

b For stitches with a left needle position

c Left needle position on the needle plate <inch>

d Left needle position on the needle plate <cm>

e Middle (center) needle position on the bobbin cover

(with mark) <inch>

f Left needle position on the needle plate cover <inch>

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

15

Embroidery Unit

a Carriage

The carriage moves the embroidery frame automatically when

embroidering. (page 188)

b Release button (located under the embroidery unit)

Press the release button to remove the embroidery unit. (page

189)

c Embroidery frame holder

Insert the embroidery frame into the embroidery frame holder to

hold the frame in place. (page 206)

d Frame-securing lever

Press the frame-securing lever down to secure the embroidery

frame. (page 206)

e Embroidery unit connection

Insert the embroidery unit connection into the connection port

when attaching the embroidery unit. (page 188)

Operation Buttons

a “Start/Stop” button

Press this button and the machine will sew a few stitches at a

slow speed and then begin sewing at the speed set by the

sewing speed controller. Press the button again to stop the

machine. Hold the button in to sew at the machine’s slowest

speed. The button changes color according to the machine’s

operation mode.

b “Reverse/Reinforcement Stitch” button

Use this button to sew reinforcement stitches at the beginning

and end of sewing. Press this button, and the machine sews 3

stitches in the same spot and stops automatically. For straight

and zigzag stitch patterns that take reverse stitches, the

machine will sew reverse stitches at low speed only while

holding down the “Reverse/Reinforcement Stitch” button (the

stitches are sewn in the opposite direction).

c “Needle Position” button

Use this button when changing sewing direction or for detailed

sewing in small areas. Press this button to raise or lower the

needle position. With this button, you can lower and raise the

needle to sew a single stitch.

d “Thread Cutter” button

Press this button after sewing to automatically trim the excess

thread.

e “Presser Foot Lifter” button

Press this button to lower the presser foot and apply pressure to

the fabric. Press this button again to raise the presser foot.

f Sewing Speed controller

Use this controller to adjust the sewing speed. Move the slide to

the left to sew at slower speeds. Move the slide to the right to

sew at higher speeds. Beginners should sew at a slow speed.

g “Automatic Threading” button

Use this button to automatically thread the needle.

CAUTION

• After the embroidery frame is set in the frame

holder, be sure the frame-securing lever is

correctly lowered.

Green: The machine is ready to sew or is sewing.

Red: The machine cannot sew.

CAUTION

• Do not press the thread cutter button after the

threads have been cut. The needle may break

and threads may become tangled, or damage

to the machine may occur.

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

16

Using the Flat Bed Attachment

Pull the top of the flat bed attachment to open the

accessory compartment.

Using the Accessory Case

■ Opening the Accessory Case

Fully slide the bar on each side of the accessory

case, and then lift off the lid to open the case.

The case can only be opened or locked correctly if

both bars are slid in the same direction.

a Bars

■ Closing the Accessory Case

a

Fully slide the bar on each side of the

accessory case lid to align the notches in

the lid with the notches in the bars.

b

Place the lid on top of the case so that the

notches in the lid align with the tabs on the

case, and then slide the bar on each side

back to the center of the accessory case.

a Bars

■ Using the Accessory Trays

Two presser foot storage trays are stored in the

included accessory case. One is for presser feet for

utility sewing, and the other is for presser feet for

embroidery and machine quilting.

a For presser feet for utility sewing

b For presser feet for embroidery and machine

quilting

For your convenience, a presser foot storage tray

can be stored in the accessory compartment of the

flat bed attachment.

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

17

a Storage space of the flat bed attachment

b Presser foot storage space of the flat bed

attachment

c Presser foot storage trays

Storing Bobbin Clips

Bobbin clips can be stored inside of the accessory

case cover.

Using the Embroidery Unit

Carrying Case

Included accessories 45-48 are contained in the

embroidery unit carrying case. To open the

embroidery unit carrying case, raise each lock and

move the latches out of position. To re-hook the

latches and securely close the case, position the

latch on the catch of the unit lid and lower the

lock till it snaps.

a Latches

Included Accessories

See table on the next page about included

accessories.

Memo

• Placing bobbin clips on bobbins helps pre-

vent the thread from unwinding from the

bobbin. In addition, snapping bobbin clips

together allows the bobbins to be conve-

niently stored and prevents them from rolling

around if they are dropped.

a

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS

18

12345 67

8 9 101112131415

16 17 18 19 20 21 22

23 24 25 26 27 28 29 30

31 32 33 34 35 36 37

38 39 40 41 42 43 44

45

*

46* 47* 48*

49 50 51 52 53

54 55 56 57

58

**

59 60

*Included Accessories 45-48 are contained in the embroidery unit carrying case.

75/11 2 needles

90/14 2 needles

90/14 2 needles:

Ball point needle (gold colored)

2.0/11 needle

75/11

2 needles

Page is loading ...

Brother Sewing Machine 882-W07 User manual

This manual is also suitable for

Brother Sewing Machine 882-W07 User manual

Related papers

Other documents