Dorel Home Furnishings 4083049B Owner's manual

DO NOT RETURN TO THE STORE !

Visit www.dhpfurniture.com/eng/support-home

or call Toll-Free 1-800-267-1739

4083049A/B

B344083049A/B-00 - 10125-M

Date of Purchase

Alford Premium Modern Canopy Bed

K.W. - 2016/3/23

If parts are missing or damaged, we will gladly ship your

replacement parts free of charge.

Lot Number

Thank you for purchasing from DHP!

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY

INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

1

Queen

Black

Weight Limit: 500 Lb / 227 Kg

Contact Us!

cs@dhpfurniture.com

DHP

410E, First Street South, Wright City, MO 63390, USA

Attention: Consumer Service.

Read Before Beginning Assembly

1-800-267-1739

Monday - Friday, 9:00 am - 5:00 pm (Eastern Time)

Warranty Information

2

B344083049A/B-00

Caution

DHP warrants this product to be free from defects in material and workmanship and

agrees to remedy any such defect. This warranty covers one year from the date of

original purchase. This is solely limited to the repair or replacement of defective

parts and assembly labor is not included.

This warranty does not apply to any product which has been improperly assembled,

subjected to misuse or abuse or which has been altered or repaired in any way.

Liability for consequential damages is excluded to the extent exclusion is permitted

by law. This warranty gives you specific legal rights and you may also have other

rights which vary from state to state.

To obtain warranty service, purchaser must present original bill of sale. Components

repaired or replaced are warranted through the remainder of the original warranty

period only. The defective components will be repaired or replaced without charge,

subject to the terms and conditions described above.

Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and

Canada.

 Call our toll free number if you need assistance.

 Work in a spacious area and near where the unit will be used, preferably on a

carpet, or use a piece of the cardboard packaging to protect your floor and product.

 Recommended # of people needed for assembly: 2 (however it is always better

to have an extra hand). Estimated assembly time is 2 hours.

 Make sure all parts are included. Most parts are labeled or stamped on the raw

edge.

 Read each step carefully. It is very important that each step of the instructions is

performed in the correct order. If these steps are not followed in sequence,

assembly difficulties will occur.

 This product is designed for home use and not intended for commercial use.

 This product contains small components. Please ensure that they are kept away

from small children.

 Do not use power tools to assemble your furniture. Power tools may strip or

damage the parts.

For help with assembly, identifying parts, product information or to order parts,

please contact us:

Page is loading ...

4

Parts

B344083049A/B-00

This item is packed in 2 boxes!

All parts listed on this page are in Box A.

If Box B is missing please contact your Retailer.

Replacement Parts, Visit www.dhpfurniture.com/eng/support-home

Before you throw the package, please use the

Check Box to identify the parts and ensure that

you have all the parts needed for the assembly.

There are inner box(es) that include components

required to complete this assembly.

A

Post 01

T935890

X 1

Side Rail

T935930

X 2

Upper Side Rail

T935950

X 2

Upper Rail

T935960

X 2

Lower Rail 02

T935970

X 1

Lower Rail 01

T935980

X 2

Bracket 2

T936010

X 4

Bracket 1

T936000

X 4

Leg

T935990

X 3

Post 02

T935900

X 1

Post 03

T935910

X 1

Post 04

T935920

X 1

Brace

T935940

X 3

G

T

U

S

B

C

D

M

K

I

L

A

B

C

D

G

M

K

I

T

I

L

H

U

S

H

5

Parts

B344083049A/B-00

This item is packed in 2 boxes!

All parts listed on this page are in Box B.

If Box A is missing please contact your Retailer.

Before you throw the package, please use the

Check Box to identify the parts and ensure that

you have all the parts needed for the assembly.

There are inner box(es) that include components

required to complete this assembly.

Replacement Parts, Visit www.dhpfurniture.com/eng/support-home

E

Headboard

T936020

X 2

E

6

Hardware Pack

B344083049A/B-00

Hardware Pack #: T4083049-00

Hardware Note:

Please do not completely tighten all the hardware,

until the entire assembly is complete, unless

otherwise indicated in the step-by-step

instructions.

6

4

5

3

21

1/4" X 2 3/4"

X 14

5/16" X 1 3/8"

X 8

1/4" X 7/8"

X 12

5/16" X 3/4"

X 16

1/4" X 3/4"

X 16

4 mm

x 1

7

B344083049A/B-00

Step

1

Screw BOLTS 2 into (E).

Repate the same step for the other part (E).

X 8

E

2

A

8

B344083049A/B-00

Step

2

Attach (I) to (E) with BOLT 1.

Repeat the same step for the other part (E)

and (I).

X 6

E

I

E

I

1

B

C

9

B344083049A/B-00

Step

3

3.1 Hang (E) onto (A) & (B);

3.2 Attach (I) to (A) & (B) with BOLTS 4.

X 2

A

B

E

I

B

E

I

4

3.1

3.2

Tufted side of part (E) should

be oriented towards inside of

the bed as illustrated.

E

10

B344083049A/B-00

Step

4

Attach (T) to (A) & (B) with BOLTS 4.

X 4

A

B

T

B

T

4

F

G

11

B344083049A/B-00

Step

5

5.1 Hang (E) onto (C) & (D);

5.2 Attach (I) to (C) & (D) with BOLTS 4.

X 2

C

D

E

I

C

E

I

4

5.1

5.2

Tufted side of part (E) should

be oriented towards outside of

the bed as illustrated.

H

12

B344083049A/B-00

Step

6

Attach (H) X 3 to (G) X 2 with BOLTS 3.

X 6

G

H

G

H

3

J

13

B344083049A/B-00

Step

7

Attach (L) x 3 to (H) with BOLTS 3.

X 6

H

L

H

L

3

K

14

B344083049A/B-00

Step

8

Attach the BED FOUNDATION assembled

in STEP 7 to (A) , (B), (C) & (D) with

BOLTS 4.

Note: Before doing the assembling, please

turn over the subassembly obtained from

Step 7 to correctly orientate the parts.

X 8

A

B

C

D

G

A

G

4

L

15

B344083049A/B-00

Step

9

M

S

M

5

X 8

5

Insert (S) x 4 into (M) x 2 and secure with

BOLTS 5.

Label on Parts (M) must be

oriented towards the inside of

the bed.

M

16

B344083049A/B-00

Step

10

M

K

S

K

5

X 8

Label on Parts (K) must be

oriented towards the inside

of the bed.

Insert (S) into (K) and secure with BOLTS 5.

17

B344083049A/B-00

Step

11

A

B

C

D

M

K

Attach sub-assembly from STEP 10 to (A),

(B), (C) & (D).

N

18

B344083049A/B-00

Step

12

A

B

C

D

U

K

M

U

1

X 8

Attach (U) X 4 to each corner with BOLTS 1 as

illustrated.

19

Helpful Hints

B344083049A/B-00

 Move your new furniture carefully, with two

people lifting and carrying the unit to its new

location.

 Your DHP furniture can be disassembled and

reassembled to move.

 Some parts have been pre-assembled for this

item. They are illustrated on this page and available

for replacement.

WARNINGS:

For safety reasons and to prevent injuries:

 This bed is not intended for use by children under 4

years old.

 Prohibit jumping and horseplay on this bed.

 Only use a mattress which is 79" - 80" long and 59"

- 60" wide.

 Do not use risers under this bed.

Helpful Hints

Weight Limit: 500 Lb / 227 Kg

End Cap 1

T392470

X 4

End Cap 2

T392520

X 3

Page is loading ...

Dorel Home Furnishings 4083049B Owner's manual

This manual is also suitable for

Dorel Home Furnishings 4083049B Owner's manual

in other languages

Related papers

Other documents