IKEA RENLIGFWM User manual

Brand: IKEA

Model: RENLIGFWM

Category: Washing machines

Type: User manual

RENLIG

FWM7

ENGLISH 4

Contents

Safety information 4

Product description 7

Control panel 8

First use 10

Personalisation 11

Daily use 11

Helpful hints and tips 14

Washing programmes 15

Consumption values 17

Care and cleaning 18

What to do if… 21

Technical data 24

Installation 25

Electrical connection 25

Environment concerns 26

IKEA GUARANTEE 26

Subject to change without notice

Safety information

For your safety and correct operation

of the appliance, read this manual

carefully before installation and use. Always

keep these instructions with the appliance

even if you move or sell it. Users must fully

know the operation and safety features of

the appliance.

The manufacturer is not responsible for

damages caused by incorrect installation

and use.

Children and vulnerable people safety

• Do not let persons, children included, with

reduced physical sensory, reduced men-

tal functions or lack of experience and

knowledge to use the appliance. They

must have supervision or instruction for

the operation of the appliance by a per-

son who is responsible for their safety.

• Keep all packaging well away from chil-

dren. There is risk of suffocation.

• Keep all detergents in a safe area. Do

not let children touch the detergents.

• Make sure that children or pets do not

climb into the drum. Please check into the

drum before using it.

This appliance incorporates a special

feature to prevent children and pets be-

coming trapped inside the drum.

To activate this

device, rotate the

button clockwise

(without pressing

it) inside the door

until the groove is

horizontal. If nec-

essary use a coin.

To disable this de-

vice and restore

the possibility of

closing the door,

rotate the button

anticlockwise until

the groove is verti-

cal.

General safety

• Do not change the specifications or modi-

fy this product. There is risk of injury and

damage to the appliance.

• If the appliance is delivered in the winter

months when there are minus tempera-

tures, store it at room temperature for 24

hours before using for the first time.

Please read the “dangers of freezing”

chapter.

• This appliance is designed for use in nor-

mal inside temperature. Manufacturer is

not responsible for freezing damages.

• Always unplug the appliance and turn off

the water supply after use, cleaning and

maintenance.

ENGLISH 4

Installation

• A qualified and competent person must

do the electrical and the plumbing instal-

lation.

• This appliance is heavy. Take care when

you move it.

• Make sure that the appliance is not dam-

aged because of transport. Do not con-

nect a damaged appliance. If necessary,

contact dedicated After Sales Service.

• Remove all packaging and transit bolts

before first use. Serious damage can oc-

cur to the appliance or to neighbouring

cabinets or furniture.

• Keep all transit devices so that they can

be refitted if the appliance ever has to be

transported again. Please refer to the rel-

evant steps in the Assembly Instruction.

• Never place cardboard, wood or similar

materials under the appliance to com-

pensate for any unevenness in the floor.

Level accurately the appliance and tight

the lock nuts to prevents vibration, noise

and displacement of the appliance dur-

ing operation.

• If your appliance is installed on a carpe-

ted floor, adjust the feet in order to en-

sure that the air must circulate freely un-

der the appliance.

• Check that your appliance is not standing

on the inlet and drain hose and the work-

top or the back of the appliance is not

pressing the electrical supply cable

against the wall.

• Always be sure, that there is no water

leakage from hoses and their connections

after the installation.

• If the appliance is installed in a location

subject to frost, please read the “dangers

of freezing” chapter.

Use

• The appliance is only for domestic use.

Do not use the appliance for commercial

and industrial use or for other uses.

• Only an authorised service engineer can

repair this appliance. Use only original

spare parts.

• Refer to the instructions on the label of

each item (garment) before washing.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets

are empty and buttons and zips are fas-

tened.

• Any objects such as coins, safety pins,

nails, screws, stones or any other hard,

sharp material can cause extensive dam-

age and must not be placed into the ap-

pliance.

• Treat stains such as paint, ink, rust, and

grass before washing.

• Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you overfill. Refer to

the manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces,

washable belts etc. in a washing bag or

pillow case as it is possible for such items

to slip down between the tub and the in-

ner drum.

• Do not use your appliance to wash arti-

cles with whalebones, items without hems,

frayed and torn. Underwired bras must

NOT be washed.

• Garments which have been in contact

with volatile petroleum products should

not be appliance washed. If volatile

cleaning fluids are used, care should be

taken to ensure that the fluid is removed

from the garment before placing in the

appliance.

• The water we use normally contains lime.

It is a good idea to periodically use a

water softening powder in the appliance.

Do this without any laundry into the drum

and according to the softening powder

manufacturer’s instructions. This will help

to prevent the formation of lime deposits

making your appliance more efficiency.

• Never pull the power supply cable to re-

move the plug from the socket; always

take hold of the plug itself.

ENGLISH 5

• Never use the appliance if the power

supply cable, the control panel, the work-

ing surface or the base is damaged so

that the inside of the appliance is accessi-

ble.

Water inlet

• This appliance must be connected to a

cold water supply.

• Do not use connection hoses from an old

appliance to connect it to the water sup-

ply.

• The water pressure must be in the limits

(refer to the chapter «Technical data» ta-

ble). Make sure that the local water au-

thority gives you the average mains pres-

sure in your area.

• Make sure that there are no kinks in the

water inlet hose and that the water inlet

hose is not squashed or entangled.

• Before connecting up the appliance to

new pipework or to pipework that has

not been used for some time, run off a

reasonable amount of water to flush out

any debris that may have collected in the

pipes.

• Turn the inlet hose on the back of the ap-

pliance to the left or the right to suit the

installation.

• The inlet hose must not be lengthened. If

it is too short and you do not wish to

move the tap, you will have to purchase a

new, longer hose specially designed for

this type of use.

• Before opening the water tap, be sure to

tighten the ring nut well to prevent any

leaks.

Water drainage

• Make sure the end of the drain hose can-

not come unhooked when the appliance

is emptying. This could be done by tying

it to the tap with a piece of string or at-

taching it to the wall.

• The drain hose must be placed at a

height of not less than 44 cm and not

more than 90 cm. Please refer to the As-

sembly Instruction booklet.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from

the mains socket.

• Clean the exterior cabinet of the appli-

ance with soap and water only, and then

dry thoroughly.

• The washing powder and additive dis-

penser drawer should be cleaned regu-

larly.

• Inspected the pump regularly and partic-

ularly if:

– the appliance does not empty and/or

spin

– the appliance makes an unusual noise

during draining due to objects such as

safety pins, coins etc. blocking the

pump.

• Never remove the pump cover during a

wash cycle. Always wait until the appli-

ance has drained out the water. If you

have selected an high temperature wash-

ing programme please wait until the wa-

ter has cooled down.

• Ensure that the pump cover is securely re-

tightened to prevent any leaks.

ENGLISH 6

Product description

1 2

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating Plate

5 Drain pump

6 Adjustable feet

Detergent dispenser drawer

Compartment for detergent used for

prewash and soak phase or for stain re-

mover used during the stain action phase

(if available). The prewash and soak de-

tergent is added at the beginning of the

wash programme. The stain remover is

added during the stain action phase.

Compartment for powder or liquid de-

tergent used for main wash. If using liquid

detergent pour it just before starting the

programme.

Compartment for liquid additives (fab-

ric softener, starch).

Follow the product manufacturer’s

recommendations on quantities to

use and do not ever exceed the «MAX»

mark in the detergent dispenser drawer.

Any fabric softener or starching additives

must be poured into the compartment be-

fore starting the wash programme.

ENGLISH 7

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as

the buttons and the indicator lights. These are presented by relevant numbers on the

following pages.

5678910

3 4

1 Programme selector dial

2 Display

3 Door locked indicator light

4 Delay Start button

5 Start/Pause button

6 Extra Rinse button

7 Easy Iron button

8 Prewash button

9 Multi-Functions button

10 Spin reduction button

Table of symbols

= On/Off - Reset

= Spin

= Cottons = No spin

= Cold wash

= Rinse Hold

= Synthetics = Options

= Delicates = Economy

= Handwash = Quick Wash

= Wool = Prewash

= Special programmes = Easy Iron

= Jeans = Extra Rinse

= Soak = Start/Pause

= Rinses = Door locked

= Drain = Delay Start

ENGLISH 8

Programme selector dial It allows you to switch the appliance On/Off and/or to select

a programme.

Spin reduction button By pressing this button you can change the spin speed of the

selected programme.

• No Spin option: by selecting this option, all spinning pha-

ses are suppressed and replaced by a drain, so as not to

wrinkle the laundry. Recommended for extremely delicate

fabrics.

• Rinse Hold option: by selecting this option the water of the

last rinse is not emptied out to prevent the fabrics from

creasing. Before opening the door it will be necessary to

empty out the water. To empty out the water, please read

the paragraph «At the end of the programme».

Multi-Functions button: By pressing this button, you can select only one of the op-

tions. The relevant indicator light will light up.

• Economy: recommended washing programme for cottons

and synthetic items lightly or normally soiled at a temper-

ature of 40° C or higher. The washing time will be pro-

longed and the washing temperature will be reduced. You

can use this option if you want to wash normally soiled

laundry and at the same time save energy.

• Super Quick: a very short cycle for slightly soiled items that

have been worn for a short time.

Prewash button By selecting this option the appliance performs a prewash

cycle before the main wash phase. The washing time will be

prolonged. This option is recommended for heavily soiled

laundry.

Easy Iron button By selecting this option the laundry is gently washed and

spun to avoid any creasing. In this way ironing is easier. Fur-

thermore the machine will perform some additional rinses in

some programmes. On cotton programmes the maximum

spin speed is reduced automatically.

Extra Rinse button This appliance is designed for saving energy. If it necessary

to rinse the laundry using an extra quantity of water (extra

rinse), select this option. Some additional rinses will be per-

formed. This option is recommended for people who are al-

lergic to detergents, and in areas where the water is very

soft.

Start/Pause button This button allows you to start or to interrupt the selected

washing programme.

ENGLISH 9

Door Locked indicator

light

The indicator light 3 illuminates when the programme starts

and indicates if the door can be opened:

• light on: the door cannot be opened. The machine is work-

ing or has stopped with water left in the tub.

• light off: the door can be opened. The programme is fin-

ished or the water has been emptied out.

• light blinking: the door is opening in a few minutes.

Delay Start button The programme can be delayed from 30 min - 60 min - 90

min, 2 hours and then by 1 hour up to a maximum of 20

hours by means of this button.

Display

10.1 10.2

The display shows the following information:

• 10.1

– Child safety lock.

This device permits you to leave the appliance unatten-

ded during it's functioning.

• 10.2

– Duration of the selected programme.

After selecting a programme, the duration is displayed

in hours and minutes (for example

). The duration

is calculated automatically on the basis of the maximum

recommended load for each type of fabric. After the

programme has started, the time remaining is updated

every minute.

– Delayed start.

The Selected delay set by pressing the relevant button

appears on the display for a few seconds, then the du-

ration of the selected programme is displayed again.

The delay time value decreases by one unit every hour

and then, when 1 hour remains, every minute.

–Alarm codes.

In the event of operating problems, some alarm codes

can be displayed, for example

(see paragraph

«What to do if...»).

– Incorrect option selection.

If an option which is not compatible with the set wash

programme is selected, the message Err is displayed at

the bottom of the display for a few seconds and the in-

tegrated red indicator light of button 5 start flashing.

– End of programme.

When the programme has finished the flashing zero (

) is displayed, the indicator light 3 and the indicator

light of button 5 go out and the door can be opened.

First use

• Ensure that the electrical and water

connections comply with the installa-

tion instructions.

• Remove the polystyrene block and

any material from the drum.

ENGLISH 10

• Before the first wash, run a cotton

cycle at the highest temperature

without any laundry in the machine,

to remove any manufacturing resi-

due from the drum and tub. Pour

1/2 a measure of detergent into the

main wash compartment and start

the machine.

Personalisation

Acoustic signals

The machine is provided with an acoustic

device, which sounds in the following cases:

• at the end of the cycle

• if there is a fault.

By pressing the 7 and 8 buttons simultane-

ously for about 6 seconds, the acoustic sig-

nal is deactivated (except if there is a fault).

By pressing these 2 buttons again, the

acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appli-

ance unattended so you do not need to

worry that children might be injured by or

cause damage to the appliance. This func-

tion remains enabled also when the wash-

ing machine is not working.

There are two different ways to set this op-

tion:

1. Before pressing button 5: it will be im-

possible to start the machine.

2. After pressing button 5: it will be impos-

sible to change any other programme

or option.

To enable or disable this option press simul-

taneously for about 6 seconds buttons 9

and 10 until on the display, the icon

ap-

pears or disappears.

Daily use

Open the door

Open the door by carefully pulling the door

handle outwards.

Load the laundry

Place the laundry in

the drum, one item

at a time, shaking

them out as much

as possible.

By pushing the

porthole frame,

close firmly the

door.

Measure out detergent and fabric

softener

Pour the detergent

into the main wash

compartment

in the appropriate

compartment if the

selected pro-

gramme/option it

requires (see more

details in "Deter-

gent dispenser

drawer").

To pour the right

quantity of the de-

tergent, see more

details in "Degrees

of water hardness".

ENGLISH 11

2 Pour fabric softener

into the compart-

ment marked

(must not exceed

the «MAX» mark in

the drawer).

Close the drawer gently

Select the required programme by turning

the programme selector dial (1)

The appliance is now switched on. The indi-

cator light of button 5 starts to blink.

At the end of the programme the selector

dial must be turned to position O, to switch

the appliance off.

For the description of each wash cycle,

the compatibility among the washing

programmes and the options, consult the

chapter «Washing Programmes».

Caution! If you turn the programme

selector dial to another programme

when the appliance is working, the red

indicator light of button 5 will blink 3 times

and the message Err appears on the

display to indicate a wrong selection. The

appliance will not perform the new selected

programme.

Reduce the spin speed or select the No

Spin or Rinse Hold by pressing button 10

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 10 repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed. The relevant indi-

cator light illuminates.

Select the available options by pressing

buttons 6, 7, 8 and 9

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the pro-

gramme.

When these buttons are pressed, the corre-

sponding indicator lights illuminate. When

they are pressed again, the indicator lights

go out. If an incorrect option is selected, the

integrated red indicator light of the button

5 flashes for 3 times and the message Err

appears on the display.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing button

Before you start the programme, if you wish

to delay the start, press this button to select

the desired delay.

The selected delay time value will appear

on the display for a few seconds, then the

duration of the programme will appear

again.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button 5.

Selecting the delay start :

1. Select the programme and the required

options.

2. Select the delay start by pressing but-

ton 4.

3. Press button 5:

– the machine starts its hourly count-

down.

– the programme will start after the se-

lected delay has expired.

Cancelling the Delay Start after having star-

ted the programme:

1. Set the washing machine to PAUSE by

pressing button 5.

2. Press button 4 once. On the display will

appear

3. Press button 5 again to start the pro-

gramme.

ENGLISH 12

• The selected delay can be changed

only after selecting the washing pro-

gramme again.

• The door will be locked throughout

the delay time. If you need to open

the door, you must first set the wash-

ing machine to PAUSE by pressing

button 5 and wait a few minutes be-

fore opening the door. After you

have closed the door, press the

same button again.

•The Delay Start cannot be selected

with the draining programme.

Start the programme by pressing button 5

To start the selected programme, press this

button; the corresponding green indicator

light stops blinking.

The indicator light 3 illuminates to indicate

that the appliance starts operating and the

door is locked.

If you have chosen a delayed start, the ma-

chine will begin the countdown.

If an incorrect option is selected, the

message Err appears on the display

for a few seconds and the red indicator

light of the button 5 blinks 3 times.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out.

Before you make any change, you must

PAUSE the appliance by pressing the button

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to O and then to the new pro-

gramme position. Start the new programme

by pressing the button 5 again. The wash-

ing water in the tub will be not emptied out.

Interrupting a programme

Press the button 5 to interrupt a programme

which is running, the corresponding green

indicator light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to O to cancel a pro-

gramme which is running.

You can select now a new programme.

Opening the door after the programme

has started

First set the machine to pause by pressing

the button 5.

If the indicator light 3 blinks and after a few

minutes goes off, the door can be opened.

If the indicator light 3 remains lit, this means

that the machine is already heating or that

the water level is too high. In any case, do

not try to force the door open!

If you cannot open the door but you need

to open it, you have to switch the machine

off by turning the selector dial to

. After

a few minutes the door can be opened.

After closing the door, it is necessary to se-

lect the programme and options again and

to press button 5.

Caution! Pay attention to the water

level and temperature!

At the end of the programme

The machine stops automatically. Some

acoustic signals sound and a blinking

ap-

pears on the display, the indicator light of

button 5 and the indicator light 3 go off.

If a programme or an option that ends with

water left in the tub has been selected, the

indicator light 3 remains on and the door is

locked to indicate that the water must be

emptied out before opening the door.

To empty out the water:

Turn the programme selector dial to

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing button 10.

4. Press button 5.

At the end of the programme, the door is

released and can be opened. Turn the pro-

gramme selector dial to

to switch the

machine off.

ENGLISH 13

Remove the laundry from the drum and

carefully check that the drum is empty. If

you do not intend to carry out another

wash, close the water tap. Leave the door

open to prevent the formation of mildew

and unpleasant smells.

Stand by : once the programme has finish-

ed after a few minutes the energy saving

system will be enabled. The brightness of

the display is reduced. By pressing any but-

ton the appliance will come out of the ener-

gy saving status.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each gar-

ment label and the manufacturer’s washing

instructions. Sort the laundry as follows:

whites, coloureds, synthetics, delicates,

woollens.

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisa-

ble to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

stain remover product then rub in the soap

and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth

and dab the stain; treat several times.

Dried grease stains: moisten with turpen-

tine, lay the garment on a soft surface and

dab the stain with the fingertips and a cot-

ton cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since

the cellulose structure will already have

been damaged and the fabric tends to

hole.

Mould stains: treat with bleach, rinse well

(white cottons and fast coloureds only).

Grass: soap lightly and treat with bleach

(white cottons and fast coloureds only).

Ball point pen and glue: moisten with ace-

tone

, lay the garment on a soft cloth and

dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with

bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

, then with ace-

tic acid; treat any residual marks on white

fabrics with bleach and then rinse thor-

oughly.

Tar stains: first treat with stain remover, me-

thylated spirits or benzine, then rub with

detergent paste.

Degrees of water hardness

Water hardness is classified in so-called

“degrees” of hardness. Information on

hardness of the water in your area can be

obtained from the relevant water supply

company, or from your local authority.

Characteristic

Degrees of water hardness

German °dH French °T.H.

Soft 0-7 0-15

Medium 8-14 16-25

Hard 15-21 26-37

Very hard > 21 > 37

1) do not use acetone on artificial silk

ENGLISH 14

A water softener must be added when water has a medium-high degree of hardness.

Follow the manufacturer’s instructions. The quantity of detergent can then always be

adjusted (reduced) to degree of hardness soft.

Washing programmes

Please always refer to the care label symbol of your garment and select the washing

programme based on what it says.

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

COTTONS

90°-60°

White cotton (heavy-

normally soiled

items).

Main wash

Rinses

Max. final

spin at

1600 rpm

7 kg

3.5 kg

Spin

No Spin

Rinse Hold

Economy

Super

Quick

Prewash

Easy Iron

Extra Rinse

COTTONS

40°-30°-Cold

Coloured cotton

(normally-lightly

soiled items).

Main wash

Rinses

Max. final

spin at

1600 rpm

7 kg

3.5 kg

Spin

No Spin

Rinse Hold

Economy

Super

Quick

Prewash

Easy Iron

Extra Rinse

SYNTHETICS

60°-40°-30°-

Cold

Synthetic or mixed

fabrics: underwear,

coloured garments,

non-shrink shirts,

blouses.

Main wash

Rinses

Max. final

spin at 900

rpm

3.5 kg

2 kg

Spin

No Spin

Rinse Hold

Economy

Super

Quick

Prewash

Easy Iron

Extra Rinse

ENGLISH 15

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

DELICATES

40°-30°-Cold

Delicate fabrics: for

example curtains.

Main wash

Rinses

Max. final

spin at 700

rpm

3.5 kg

2 kg

No Spin

Rinse Hold

Super

Quick

Prewash

Extra Rinse

HANDWASH

30°-Cold

Special programme

for delicate fabrics

with «hand washing»

care symbol.

Main wash

Rinses

Max. final

spin at 900

rpm

2 kg

Spin

No Spin

Rinse Hold

WOOL

40°

Special programme

for wool garments

bearing the «Pure

new wool, non-

shrink, appliance

washable» label.

Main wash

Rinses

Max. final

spin at 900

rpm

2 kg

Spin

No Spin

Rinse Hold

JEANS

40°

With this programme

it is possible to wash

items like pants,

shirts or jackets in

denim and also jer-

sey realized with hi-

tech materials.

Main wash

Rinses

Max. final

spin at 900

rpm

3.5 kg

Spin

No Spin

Rinse Hold

Prewash

Extra

Rinse

SOAK

30°

Special programme

for heavily soiled

laundry. The appli-

ance performs a

soak at 30° C. At the

end of this time the

appliance will stop

automatically with

water left in the tub.

Before starting a

new washing pro-

gramme, drain the

water.

Prewash

Soak for

about 40

minutes

Stop with

water in the

tub 7 kg

ENGLISH 16

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

RINSES With this programme

it is possible to rinse

and spin cotton gar-

ments which have

been washed by

hand. The appliance

performs some rin-

ses, followed by a fi-

nal long spin. The

spin speed can be

reduced.

Rinses

Max. final

spin at

1600 rpm

7 kg

Spin

No Spin

Rinse Hold

Easy Iron

Extra Rinse

DRAIN For emptying out the

water of the last

rinse in programmes

with the Rinse Hold

option selected.

Draining of

water

7 kg

SPIN Separate spin for

hand washed gar-

ments and after pro-

grammes with the

Rinse Hold option se-

lected. You can

choose the spin

speed by pressing

the relevant button

to adapt it to the

fabrics to be spun.

Max. final

spin at

1600 rpm

7 kg

Spin

1) If you select the SUPER QUICK option, we recommend you, to reduce the maximum load as indicated. (Red. load =

reduced load). Full loading is possible however with somewhat reduced cleaning results.

2) This option is not active at a temperature lower than 40° C.

3) If using liquid detergents, a programme without PREWASH must be selected.

4) The EXTRA RINSE option will be activated automatically.

5) Refer to the detergent dispenser drawer paragraph to pour the detergent for soak programme.

Consumption values

Programme Energy consumption

(KWh)

Water consumption

(litres)

Programme dura-

tion (Minutes)

White Cottons 90° 2.1 62

For the duration

of the pro-

grammes, please

Cottons 60° 1.35 58

ENGLISH 17

Programme Energy consumption

(KWh)

Water consumption

(litres)

Programme dura-

tion (Minutes)

Cottons 60° +

ECONOMY

refer to the dis-

play on the con-

trol panel.

1.05 45

Cottons 40° 0.75 58

Synthetics 40° 0.55 51

Delicates 40° 0.55 63

Wool/ Handwash 30° 0.25 58

1) Without prewash option selected.

2) «Cottons + Economy» at 60°C with a load of 7 kg is the reference programme for the data entered in the energy

label, in compliance with CEI 456 standards.

The consumption data shown on this chart is to be considered purely indicative, as it

may vary depending on the quantity and type of laundry, on the inlet water tempera-

ture and on the ambient temperature.

Care and cleaning

Warning! Switch the appliance off

before you carry out any cleaning or

maintenance work.

Maintenance Wash

With the use of low temperature washes it is

possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash

be performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash pro-

gramme.

• Use a normal measure of detergent, must

be a powder with biological properties.

Cleaning the dispenser drawer and the

drawer recess

To remove the

drawer, press the

catch downwards

and pull it out.

2 To aid cleaning, re-

move also the top

part of the additive

compartment.

Use a stiff brush to

clean and remove

all washing powder

residue.

ENGLISH 18

4 Flush out all the re-

moved parts of the

dispenser drawer

under a tap to re-

move any traces of

accumulated pow-

der.

Use the previous

brush to clean the

recess, ensuring

that upper and low-

er part of it is well

cleaned.

After having

cleaned the dis-

penser and the

drawer recess, re-

place it and run a

rinse programme

without any laundry

in the drum to flush

away any residue.

Cleaning the pump

Proceed as follows:

Open the pump door.

Put a container below the recess of the

drain pump to collect the water that flows

out.

Press the two levers and pull forward the

drainage duct to let the water flow out.

When the container is full of water, put

the drainage duct back again and empty

the container. Do steps 3 and 4 again

and again until no more water flows out

from the drain pump.

Pull back the drainage duct.

Unscrew the filter and remove it.

ENGLISH 19

Remove fluff and objects from the pump.

Make sure that the impeller of the pump

can turn. If this

does not occur, contact the service centre.

Clean the filter under the water tap and

put it back in the pump into the special

guides.

Make sure that you tighten correctly the

filter to prevent leakages.

Close the pump door.

Cleaning the water inlet filters

If the appliance takes long to fill with water

or doesn't fill, the starting button indicator

light blinks in red. Check if the water inlet fil-

ters are blocked (see chapter "What to do

if..." for more details).

Proceed as follows:

• Turn off the water

tap.

• Unscrew the hose

from the tap.

• Clean the filter in

the hose with a

stiff brush.

• Screw firmly the

inlet hose back

onto the tap.

• Unscrew the hose from the appliance.

Keep a rag nearby because some wa-

ter may flow.

• Clean the filter in the valve with a stiff

brush or with the piece of cloth.

ENGLISH 20

Page is loading ...

IKEA RENLIGFWM User manual

Brand: IKEA

Model: RENLIGFWM

Category: Washing machines

Type: User manual

Download PDF

report

IKEA RENLIGFWM User manual

IKEA RENLIGFWM User manual

Related papers

Other documents