Tiger MBO-B Instruction manuals

Type
Instruction manuals
Make sure that all parts are present before use.
Thank you for purchasing a “TIGER” Stainless Steel Bottle.
Please read the instructions completely before use.
Keep these instructions for future reference.
MBO-B
MODEL
Instructions
Stainless Steel Bottle
With carrying case
Cup
Open
button
Squeeze
button
Inner stopper A
Inner stopper B
Stopper gasket
Lid gasket
Lid
Protective sheet
Button
Spout
Spout
gasket
Body
Direct drink
cap unit
Spout cap
gasket
Spout
Inner
stopper
unit
Cold drinks only
Hot/Cold drinks
MBO-B
Specifications
Replacing and Purchasing
Consumable Parts
Before contacting customer
service
The inner stopper unit, direct drink cap unit
and gaskets are consumable parts. Check
once a year for damage/deterioration. If
heavily stained or loose, replace them.
For replacement parts, contact customer
service or the shop where you purchased
this product.
The utmost measures have been taken to
ensure the quality of this product.
However, should the product be defective,
contact your dealer and provide the
following information.
1. Product name
2. Model Number
3. Description of trouble
(As detailed as possible)
4. Purchase date
Feel free to send any questions or
comments about this product to the shop
where you purchased it.
For the purpose of performance improvement, designs, specifications and parts shown in this
publication are subject to change without notice.
TIGER HANBAI (H.K.) CO.,LTD.
Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road,
Kwai Chung, N.T.
Tel: (852) 2418-0912 Fax: (852) 2418-0911
JAPAN TIGER CORPORATION OF U.S.A.
2730 Monterey Street, Suite 105 Torrance, CA 90503
Tel: (310) 787-1985 Fax: (310) 787-1986
TIGER CORPORATION
Head Office: 3-1 Hayamicho, Kadoma City, Osaka 571-8571, Japan
URL : http://www.tiger.jp/global.html
CapacityModel Heat retention
Cold retention
0.8 L /
27.0 oz
Direct drink
cap unit
Inner stopper
unit
MBO-B080
MBO-B100
Greater than 51°C •124°F (24hours)
Greater than 77°C •171°F (6hours)
0.84 L /
28.4 oz
Less than 8°C •
46°F (6hours)
Heat retention has been calculated under the condition of adding hot water at 95°C ±1°C •
203°F±2°F and leaving it in a room temperature of 20°C±2°C • 68°F±4°F for 24hours or 6hours.
Cold retention has been calculated under the condition of adding cold water at 4°C ±1°C • 39°F±2°F
and leaving it in a room temperature of 20°C±2°C • 68°F±4°F for 6hours.
Capacity is the actual volume of water that can be stored into the product when the inner stopper
unit or direct drink cap unit is closed. This is not the “Maximum level” volume described in “Safety
Precautions”.
1.0 L /
33.8 oz
Direct drink
cap unit
Inner stopper
unit
Greater than 57°C •135°F (24hours)
Greater than 79°C •174°F (6hours)
1.05 L /
35.5 oz
Less than 8°C •
46°F (6hours)
Inner stopper unit
Direct drink cap unit
Inner stopper
Maximum
level
Beverage
Do not use the product for any
purpose other than keeping bev-
erages warm or cold for drinking.
Do not knock over, drop or
expose the product to
excessive shocks.
Do not disassemble or attempt
to repair the product by
yourself.
Be sure to clean the product
immediately after use,
especially after consuming
sports drinks.
Do not store soups or beverages
containing salt in the product.
Do not leave the product in a
bag for a long time.
Do not use chlorine-based
bleaches or acetic acid
solutions when cleaning the
product.
Do not use chlorine bleach for
the carrying case.
Do not remove the protective
sheet on the underside of the
product.
Do not attempt to add any
beverages directly from the
spout while the direct drink cap
unit is set.
Keep the product in an upright
position at all times.
Do not swing the product while
holding the strap.
Do not place the product in the
carrying case if its exterior is
wet.
Make sure the carrying case is
dry.
Ice changes the inner pressure
so the gasket may dislocate.
If this happens, set it back into
it’s proper position.
Maximum
level
Beverage
Approx.
1cm1/2-inch
Approx.
1cm1/2-inch
Important!
1 2
Safety Precautions
Safety Precautions
Do not store milk, dairy products,
or certain fruit juices in the product.
Noncompliance with these
instructions may result in scald
or injury.
Do not use the product if its
ability to retain heat declines.
Hot beverages can make the
product very hot, potentially
causing burns.
Use a cup to drink when the
product contains a hot beverage.
Do not press the open button
when the product is tilted or near
the face.
Do not tilt the product abruptly
when pouring the beverage into
the cup.
For inner stopper unit
For direct drink cap unit
For direct drink cap unit
Keep out of reach of children.
Do not let children play with the
product.
Do not put dry ice or carbonated
beverages in the product.
Do not place the product near
stoves, open flames, or other
sources of extreme heat.
Do not heat the product in a
microwave oven.
Do not fill the product above the
maximum level shown below.
Close the inner stopper unit or
direct drink cap unit firmly and
check that it is locked.
Otherwise, the contents may
leak, causing burns and
contamination.
Do not add hot water.
Cold drinks only.
Consume beverage within the
day to prevent from spoiling.
If the beverage is left for an
extended period, spoilage can
lead to the creation of gas,
raising the pressure inside
the product. This can cause
the contents to burst out or
damage the direct drink cap unit,
possibly resulting in injury.
Press
Open button
1
2
3 4
Set the product into the
carrying case.
After pouring the beverage, stand the product upright, wait for 2
or 3 seconds, close the spout, and then the cup.
3
Remove the cup, press the
open button, tilt the product,
and then pour the beverage.
4
1
How to Use
How to Use
The product rattles when shaken.
This is caused by a metal sheet moving inside the product that is used for boosting heat
retention.
To keep your beverage warm or cool longer.
Pour hot (or cold) water into the body, and let it sit for one or
two minutes to allow the inside of the body to heat (or cool).
Discard the hot (or cold) water after preheating (or precooling).
Be sure zipper guard is straight when
zipping up.
2
Set the product into the
carrying case.
Be sure zipper guard is straight when
zipping up.
Cup
Liquid remains in
the inner stopper.
Spout
Spout
Close the cup.
Close the
spout 2 to 3
seconds later.
Keep the
product in an
upright position.
To keep your beverage cool longer, pour a small amount of
cold water into the body, and let it sit for one or two minutes.
Discard the cold water after precooling.
For inner stopper unit
For direct drink cap unit
Zipper guard is
bent inward
Zipper
Carrying
case
Zipper guard is
bent inward
Zipper
Carrying
case
Attaching and removing the inner stopper unit and gaskets
Attaching and removing the gaskets on the direct drink cap unit
Inner stopper unit
Stopper gasket and spout cap gasket
To remove To attach
Spout gasket
Spout
gasket
Small slot
Groove
To remove To attach
Fit the end of a soft pointed rod (e.g.:
toothpick) into the groove and pull out
the gasket. Do not use metal skewers. Insert securely into the groove.
Spout gasket
Lid gasket
Lid gasket
Remove
5 6
Slide the safety lock down to the [Unlock] position and then
press the button to open the lid and drink.
3
Safety lock
Unlock
Lid
Button
Press
How to Clean
How to Clean
Clean after every use.
Use mild kitchen detergent.
Use a sponge or soft cloth.
Clean the inner stopper unit and direct drink cap unit after every
use.
Place the carrying case in a net bag and wash it in a washing
machine using the hand-wash or delicate cycle. Dry the carrying
case well after washing.
Attach the gaskets fully and securely.
Be sure to wipe off with dry cloth.
Do not place in a dishwasher/dryer.
Do not attach the
stopper gasket in the
incorrect place or
direction.
MBO-B
MBO-B
TIGER CORPORATION
Head Office: 3-1 Hayamicho, Kadoma City, Osaka 571-8571, Japan
: http://www.tiger-corporation.tw
1 2
1
2
3 4
3
4
1
2
5 6
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Tiger MBO-B Instruction manuals

Type
Instruction manuals

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI