2. ROOMS TO GO
  3. 32440290

ROOMS TO GO 32440290, 32450291, 32460393, 32460494 Assembly Instructions

  • Hello! I've reviewed the assembly instruction document for the SH200KBGE-1, SH200KBLU-1, SH200KGRY-1, SH200DGR-1 and SH200KPNK-1 headboards. This document provides a detailed parts list and a step-by-step guide on how to assemble the headboard, including attaching the legs and bed rails. I'm ready to answer any questions you may have about the assembly process or the parts involved.
  • What parts are included in the box?
    Which Allen key is used to attach the headboard legs?
    Is it necessary to fully tighten bolts during the first step?
Headboard
Leg
Bolts
M8 x 50mm
Lock Washer
(for M8)
Flat Washer
(for M8)
Bolts
M6 x 50mm
Lock Washer
(for M6)
Allen Key
M4 x 65mm
Allen Key
M5 x 65mm
Hex NutFlat Washer
(for M6)
x4 x4 x4 x4
x1x4x8 x1
ASSEMBLY INSTRUCTION
SH200KBGE-1 & SH200KBLU-1 & SH200KGRY-1 &
SH200DGR-1 & SH200KPNK-1
1 2
A B C D E
I
H
G
F
x2
x4
ASSEMBLY INSTRUCTION
SH200KBGE-1 & SH200KBLU-1 & SH200KGRY-1 &
SH200KDGR-1 & SH200KPNK-1
Begin assembly by attaching each Headboard Leg (2) to the bottom of the Headboard (1) by aligning
the hole and securing with 2 Allen Bolts (A) , 2 Lock Washer (B) , 3 Flat Washer (C) per leg using
Allen Key (I) .
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
I
A
B
C
F
E
G
F
D
H
Attached Bed Rails (not included) to left and right Headboard Legs (2) using 2 Allen bolts (D) and 2 Flat
Washer (F) from the back and 2 Flat Washer (F), 2 Lock Washer (E) and 2 Hex Nuts (G) from the
front. Tighten all bolts with Allen Key (H) provided.
/