2. Lovibond
  3. Single Method Strips Cl HR 10-200 - Chlorine HR

Lovibond Single Method Strips Cl HR 10-200 - Chlorine HR User manual

  • Hello! I've reviewed the Method Reference Book for Lovibond's Chlorine test strip HR 10-200. This document provides instructions on how to use the test strips to measure chlorine concentration and control disinfection by reading results from color scale. I'm ready to answer your questions about the test procedure and how to correctly store the strips.
  • What happens if the chlorine concentration is too high?
    How should the test strips be stored?
    How do i use the test strips?
Chlorine HR / Strips Cl HR 10-200
ENMethod Reference Book1.02
Chlorine HR Strips Cl HR
10-200
10 - 200 mg/L Cl2
Application List
• Disinfection Control
Notes
1. High concentrations will bleach the strip white and a thin blue line may separate wet
from dry area.
2. Color indicates approximate strength of the solution as total available chlorine.
3. Store in cool, dry place and away from direct sunlight.
4. The test strips must be stored in the closed packaging.
Chlorine HR / Strips Cl HR 10-200
ENMethod Reference Book1.0 3
Chlorine HR / Strips Cl HR 10-200
ENMethod Reference Book1.04
Remove one test strip. Hold
the end of the test strip
between index finger and
thumb.
Dip the test strip into the
solution to be tested without
agitation.
Shake off excess liquid.
Read the result from the
colour scale.
/