Spartan 1513 Owner's manual

Brand: Spartan

Model: 1513

Category: Fitness, gymnastics & weight training

Type: Owner's manual

Spartan 1513 is a multi-purpose bench designed for home use. It comes with a range of features that allow you to perform various exercises to target different muscle groups. The bench is adjustable, allowing you to customize it to suit your height and workout needs. It also features a sturdy construction with a heavy-duty frame and high-quality materials, ensuring stability and durability during your workouts. With Spartan 1513 you can target specific muscle groups with a variety of exercises. The adjustable seat and backrest allow you to find the optimal position for each exercise, maximizing the effectiveness of your workout. The bench also includes a leg holder attachment for exercises like leg curls and extensions, giving you a complete lower body workout option.

Multi Purpose bench

Owner’s Manual

Table of contents

SAFETY INSTRUCTIONS .........................................................2

WARMING UP ...........................................................................3

HARDWARE PACK ...................................................................4

HARDWARE PACK ASSEMBLY................................................5

ASSEMBLY INSTRUCTIONS ...................................................6

BENCH POSITION .....................................................................11

WORKOUT CHART ..................................................................12

EXPLODED DIAGRAM .............................................................13

PARTS LIST ..............................................................................14

Safety Instructions:

This exerciser has been designed for home use only. Professional use, commercial

or use in gym centers, will automatically cancel the manufacturers’ and/or importers’

product liability.

Before you start training on your exerciser, please read the instructions carefully.

Be sure to keep the instructions for information, in case of repair and for spare part delivery.

 This exerciser is made for home use only.

 Follow the steps of the assembly instructions carefully.

 Use only original parts as delivered.

 Before the assembly, be sure to check if delivery is complete by using the included parts-list.

 For assembly use only suitable tools and ask for assistance with assembly if necessary.

 Place the exerciser on an even, non-slippery surface. Because of possible corrosion, the usage

of any exerciser in moist areas is not recommended.

 Check before the first training and every 1-2 months that all connecting elements are tight fitting

and are in the correct condition.

Replace defective components immediately and/or keep the equipment out of use until repair.

For repairs, use only original spare parts.

 In case of repair please ask your dealer for advice

 Avoid the use of aggressive detergents when cleaning.

 Ensure that training starts only after correct assembly and inspection.

 For all adjustable parts be aware of the maximum positions to which they can be

adjusted/tightened to.

 This exerciser is designed for adults. Please ensure that children use the exerciser only under

the supervision of an adult.

 Ensure that those present are aware of possible hazards, e. g. movable parts during training.

Warning: incorrect/excessive training can cause health injuries.

 Please follow the advice for correct training as detailed in training instructions.

Consult your physician before starting with any exercise program. He can advise on the kind

of training and which impact is suitable.

• The owner’s manual is only for customers’ reference.

• The supplier can not guarantee for mistakes occurring due to translation or change in technical

specification of the product.

All data displayed are approximate guidance and cannot be used in any medical application

Warming up

15 seconds for each 20 seconds 20 seconds

25 seconds 20 seconds 20 seconds

30 seconds 25 seconds for each lag 30 seconds

20 seconds 5 seconds x 3 times 20 seconds

20 seconds for each leg 5 times 15 seconds

Hardware pack

#8 63mm sleeve (Qty 1)

#11 141mm Axle (Qty 1)

#30 M10 x 150mm Allen Bolt (Qty 1)

#28 M10 x 72mm Allen Bolt (Qty 2)

#31 M8 x 52mm Allen Bolt (Qty 10)

#29 M10 x 85mm Allen Bolt (Qty 2) #27 M10 x 20mm Allen Bolt (Qty 5)

#35 M10 Aircraft Nut (Qty 5)

#33 Ф10 Washer (Qty 15)

#38 Ф25 Big Washer (Qty 2)

#34 Ф8 Washer (Qty 10)

Parts in box

No. 1 x 1 No. 2 x 1 No. 3 x 1 No. 4 x 1

No. 5 x 2 No. 6 x 1 No. 7 x 1 No. 8 x 1 No. 9 x 2 No. 10 x 1 No. 11 x 1

No. 13 x 2 No. 22 x 2 No. 23 x 1 No. 24 x 1 No. 25 x 1

Assembly instruction

STEP 1

A. Attach the Front Stabilizer (#2) to the Main Frame (#1), Align the hole and secure with

two M10*72MM Allen Bolt (#28), four Φ10MM Washer (#33) and two M10 Aircraft Nut

(#35).

B. Attach Rear Stabilizer (#3) to the Main Frame (#1), Align the hole and secure with three

M10*20MM Allen Bolt (#27) and three Φ10MM Washer (#33).

STEP 2

A. Attach the Seat Pad (#23) to the Seat Support Frame (#4). Align the hole and secure

with four M8*52MM Allen Bolt (#31) and four Φ8 Washer (#34).

B. Attach the two Seat Adjustment Bracket (#9) to each side of the Seat Support

Frame(#4). Align the hole and secure with one M10*85MM Allen Bolt (#29), four

Φ10MM Washer (#33) and one M10 Aircraft Nut (#35).

C. Attach the Backrest Pad (#25) to the two Backrest Support Frame (#5). Align the hole

and secure with four M8*52MM Allen Bolt (31) and four Φ8MM Washer (#34).

D. Attach the Head Pad (#24) to the top of the Backrest Support Frame (#5). Align the hole

and secure with two M8*52MM Allen Bolt (31) and two Φ8MM Washer (#34).

STEP 3

Attach the Backrest Incline Support (#6) to the center of the two Backrest Support

Frame(#5), Align the hole and secure one M10*150MM Allen Bolt(#30), two Φ10MM

Washer(#33) and one M10 Aircraft Nut(#35).

STEP 4

Attach the Seat Pad Assembly and Backrest Pad Assembly to the Pivot on the Main Frame

(#1), Align the hole and Secure with one 141MM Axle (#11), two M10*20MM Allen Bolt (#27)

and two Φ10MM big Washer (#38).

STEP 5

Secure the other side of the two Seat Adjustment Bracket (#9) with one Sleeve (#8), one

M10*85MM Allen Bolt (#29), two Φ10MM Washer (#33) and one M10 Aircraft Nut (#35).

The Seat Pad has two position incline adjustment, place the Seat Adjustment Assembly to

desired position before your workout.

STEP 6

A. Slide the Foam Roll Tube (#10) into the hole on the top of the Leg Holder Support (#7)

with half way, attach two Foam Roll (#22) from each side of the Foam Roll Tube (#10).

B. Attach the Leg Holder Frame (#7) to the front of the Main Frame (#1) as shown in the

figure. With the hook portion of the Leg Holder Frame(#7) resting on the rubber stop of

the Main Frame(#1) and the top portion of the Leg Holder Frame(#7) aligning with the

Pull Pin Hole. Secure the Leg Holder Frame(#7) by insert the Pull Pin(#12) through the

Leg Holder Frame(#7) and the Main Frame(#1).

SUB—ASSEMBLY & LEVEL ADJUSTMENT

A. Attach the Transport Wheels (#13) to the U shaped bracket on the Rear Stabilizer(#3),

Secure each of them with one M8*43MM Allen Bolt(#32), two Φ8MM Washer(#34) and

M8 Aircraft Nut(#37).

B. Screw four Level Feet (#14) from the bottom of the Front &Rear Stabilizer (#2&#3),

Tighten or loose the four level feet to adjust the level of the bench.

Bench position

FLAT

30 DEGREES

45 DEGREES

60 DEGREES

UPRIGHT

Decline

Workout chart

WARNING! PLEASE READ BEFORE EXERCISE

Always warm-up your body muscle before exercising, easy stretching (without bouncing)

and light calisthenics, for several minutes, are recommended to prepare your body.

Exercise the complete body every other day, up to three times a week. The one day rest

enables the body recover from the previous workout.

WORKOUT CHART

Biceps Curl

Develop the biceps muscles

Sit on the bench with you back supported on the bench

Grasp a dumbbell in each hand with the palms facing forwards. Raise

the dumbbells until the biceps are fully contracted. Return slowly to the

start position and repeat,

Beginners: 10 Reps with light weights

Intermediate: 10 reps/3 sets

Advance: 10Reps/ 4 sets with gradually increasing weights

Chest Press

Develop the upper pectoral muscles of the chest.

With the elbows slightly bent. Hold two dumbbells at arms length

overhead, Lower the dumbbells slowly out to the sides of the chest to a

point where you can feel the stretch of the pectoral muscles, Bring the

dumbbells back to the start position again in the same arc and repeat

Beginners: 10 Reps with light weights

Intermediate: 10 reps/3 sets

Advance: 10Reps/ 4 sets with gradually increasing weights

Rows

Develop the Triceps muscles

Stand alongside the bench with your right knee bent in front of your left

leg, and the dumbbell in your left hand, hold the bench side with your

right hand for support. Bend over and drop your left hand towards the

floor Now, Pull the dumbbell up until it is tucked into your side. Return to

starting position and repeat with your opposite side.

Beginners: 10 Reps with light weights

Intermediate: 10 reps/3 sets

Advance: 10Reps/ 4 sets with gradually increasing weights

Sit-Up

Develop the Abdominal muscles.

Sit on the bench with your knees bent to about 45 degrees and your feet

hooked under the Leg Bar Foam Rollers, Put your hand on your

shoulders and your chin on your chest

(This will put a slight bow in your back)

For this position, Inhale and lie back until your lower back touches the

Backrest Board, Exhale as you raise back up to the starting position

Beginners: 10 Reps with light weights

Intermediate: 10 reps/3 sets

Advance: 10Reps/ 4 sets with gradually increasing weights

Exploded diagram

Parts list

Parts No. Description Q’ty Parts No. Description Q’ty

1 Main Frame 1 20 40*80MM Big R End Cap 1

2 Front Stabilizer 1 21 20*40*1.5MM End Cap 4

3 Rear Stabilizer 1 22 Foam Roll 2

4 Seat Support Frame 1 23 Seat Pad 1

5 Backrest Support Frame 2 24 Head Pad 1

6 Backrest Incline Support 1 25 Backrest Pad 1

7 Leg Holder Frame 1 26 Rubber Coating Sticker 4

8 Sleeve 1 27 M10*20MM Allen Bolt 5

9 Seat Adjustment Bracket 2 28 M10*72MM Allen Bolt 2

10 Foam Roll Tube 1 29 M10*85MM Allen Bolt 2

11 141MM Axle 1 30 M10*150MM Allen Bolt 1

12 Pull Pin 1 31 M8*52MM Allen Bolt 10

13 Transport Wheel 2 32 M8*43MM Allen Bolt 2

14 Level

Foot 4 33 Φ10 Washer 15

15 Bushing

6 34 Φ8 Washer 14

16 Rubber Cap 2 35 M10 Aircraft Nut 5

17 Φ19MM End Cap 2 36 ST4.8 MM Philip Screw 1

18 Φ25MM End Cap 2 37 M8 Aircraft Nut 2

19 □50MM Big R End Cap 1 38 M25*10 Big Washer 2

Spartan 1513 Owner's manual

Brand: Spartan

Model: 1513

Category: Fitness, gymnastics & weight training

Type: Owner's manual

Download PDF

report

Spartan 1513 Owner's manual

Spartan 1513 Owner's manual

Other documents