Gigabyte R263-S30 User guide

Type
User guide
GIGABYTE Easy BIOS Refresh
User’s Guide
Rev.1.0
Copyright
© 2022 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specications and features in this manual may be made by GIGABYTE without
prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentation:
User Manual: detailed information & steps about the installation, conguration and use of this
product (e.g. motherboard, server barebones), covering hardware and BIOS.

User Guide: detailed information about the installation & use of an add-on hardware or
software component (e.g. BMC rmware, rail-kit) compatible with this product.
Quick Installation Guide: a short guide with visual diagrams that you can reference easily for
installation purposes of this product (e.g. motherboard, server barebones).
Please see the support section of the online product page to check the current availability of these
documents.
For More Information
For related product specications, the latest rmware and software, and other information please visit our website at
http://www.gigabyte.com
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller
portal: http://reseller.b2b.gigabyte.com
For further technical assistance, please contact your GIGABYTE representative or visit
https://esupport.gigabyte.com/ to create a new support ticket
For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email:
- 3 -
Table of Contents
Chapter 1 Getting Started ...............................................................................................4
1-1 Update BIOS by Using Gigabyte Server Management Console ...................... 4
1-1-1 DownloadtheBIOSlefromtheWebsite ................................................................4
1-1-2 GigabyteManagementConsoleNetworkConguration ..........................................6
1-1-3 Log In Gigabyte Management Console ....................................................................8
1-1-4 Entering Gigabyte Management Console .................................................................9
1-2 Update BIOS by Using Gigabyte GSM CLI Utility .......................................... 13
1-2-1 Update BIOS1 ........................................................................................................15
1-2-2 UpdateBIOS1andBIOS2(Backupimage) ............................................................17
- 4 -
Easy BIOS
1-1 Update BIOS by Using Gigabyte Server Management Console
Supported Browsers
Chrome latest version.
Eage latest version.
FireFox latest version.
Note: ItisadvisabletouseChromeorIEforH5Viewer,sinceFirefoxhasitsown
memory limitations.
1-1-1 Download the BIOS le from the Website
1. DownloadtheBIOSlefromGigabytewebsite:www.gigabyte.com.
2. Searchyourmodel.
3. Gototheproductpage.
4. Select Support.
5. Select BIOS. Click Download to save the packagele.
Chapter 1 Getting Started
- 5 -
Easy BIOS
6. Choosethefolderlocation.(Savetheletoaknownlocationontheclientsystem)
and Click Save.
7. Go to the location on the client system and extractthepackagele.
Easy BIOS
- 6 -
1-1-2 Gigabyte Management Console Network Conguration
Followtheinstructiontoenabletheconsoleredirectionfunction.
1. YoucangathertheIPaddressonthePOSTscreen.
2. Or,GotoBIOSsetupmenu.
3. Select Server Management.
4. Select BMC network Conguration.
5. DeneCongurationAddresssourcetoDynamicBmcDhcporStatic.
6. Save and Exit.
7. The BMC IP Address will appear on the Station IP address parameter.
- 7 -
Easy BIOS
8. SavethecongurationandexitBIOSsetupmenu.
Easy BIOS
- 8 -
1-1-3 Log In Gigabyte Management Console
ToaccesstheGigabyteManagementConsole,theBMCWebutilitywillpromptyoutoenterthe
UserNameandPassword.
Theeldsareexplainedasfollows:
ForbasiclogintotheBMCWebUI,usethefollowinglogin:
Username:admin
Password:RefertouniqueMBserialnumber.
Easy BIOS
- 9 -
1-1-4 Entering Gigabyte Management Console
AfterenteringGigabyteManagementConsolefollowtheinstructionstoupdateBIOS.
1. Go to Power Control,PowerOfftheclient,Perform Action
2. Go to Maintenance page and select Firmware Update.
Easy BIOS
- 10 -
3. ClickBrowseiconandselecttheBIOSimagele.ClickStart rmware updates.
4. SelectBIOS1orBIOS2intheselectBIOSeld.ClickProcess to Flash.
Easy BIOS
- 11 -
5. AfterclickingProceed to Flash,a doubleconrmation dialogboxappears.ClickOKto
processBIOSash.
6. Waitfortheupdatingproceduresiscompleted.
Easy BIOS
- 12 -
7. ClickOKwhentheupdatingprocedureiscompleted.
Easy BIOS
- 13 -
1-2 Update BIOS by Using Gigabyte GSM CLI Utility
Download the BIOS le from the Website
1. DownloadtheBIOSle.Detailinstructions,goto:1-1-1DownloadtheBIOSle
fromtheWebsite.
2. GettheIPaddressonthePOSTscreen.Orgoto1-1-1GigabyteManagement
ConsoleNetworkCongurationforDynamicIPconguration.
Download the Utility le from the Website
1. DownloadGSMCLIutilitypackage(.zip)fromwww.gigabyte.com.
2. Searchyourmodel.
3. Gototheproductpage.
4. Select Support.
5. Select Utility.
NOTE!
If youareusingOracleJava makesureyourJavaversionislatest versionand
javaws and ipmitool.
Forotherdetails,pleaserefertoserver_utility_cli_2.1.xx\2.x.xx\docs\GbtReadme.
txtintroduction.
Easy BIOS
- 14 -
6. ClickDownloadtosavethepackagele.
7. SaveGSMCLIpackageinthefollowingpath:C:\BIOSofclientsystem.
8. ExtracttheGSMCLIpackageleinC:\BIOS.
9. SavetheBIOSpackagefileinthefollowingpath:C:\BIOS\server_utility_
cli_2.1.xx\2.1.59ofclientsystem.
Easy BIOS
- 15 -
1-2-1 Update BIOS1
Execute GSM CLI utility with update command to update BIOS1:
1. Powerofftheclientsystem,usagecommand:
java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassisoff
<BMCIP>:TargetsystemBMCIP
<Account>:TargetsystemBMCusername
<Password>:TargetsystemBMCpassword
2. Afterenteringthepoweroffcommand,pressthekeyboard"enter"toshutdown
client system.
3. UpdateBIOS1usagecommand:
java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>updatebios
auto<FWpackage>
<FWpackage>:BIOSupdatermwarepackages.(Onlysupport*.ziple)
4. AfterenteringtheupdateBIOS1command,pressthekeyboard"enter"tostartthe
update.Andwaitupdatestatustocomplete.
Easy BIOS
- 16 -
5. AfterupdateBIOS1completeandsuccess,settargetsystemtopoweron.Usage
command:
java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassison
Easy BIOS
- 17 -
1-2-2 Update BIOS1 and BIOS2 (Backup image)
1. DownloadtheBIOSle.Detailinstructions,goto:1-1-1DownloadtheBIOSle
fromtheWebsite.
2. ExecuteGSMCLIutilitywithupdatecommandtoupdateBIOS1andBIOS2
(Backupimage)
3. Settargetsystemtopoweroff,usagecommand:
java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassisoff
4. UpdateBIOS1andBIOS2(Backupimage)usagecommand:
java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>updatebios
backupimg<FWpackage>.
NOTE!
Ifupdatebackupimagefailsordamaged,itmaycausesystemcrash.Pleaseprocess
carefully.
Easy BIOS
- 18 -
5. AfterenteringtheupdateBIOS1andBIOS2command,pressthekeyboard"enter"
tostarttheupdate.Andwaitupdatestatustocomplete.
6. PressYtocontinue.
NOTE!
Theupdateprocessfailuremaycausesystemcrash,ifagreepleaseproceed.
Easy BIOS
- 19 -
Easy BIOS
- 20 -
7. Afterupdatecompleteandsuccess,setclientsystemtopoweron.
Usagecommand:
java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassison
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Gigabyte R263-S30 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI