Gigabyte E263-S30 User guide

Brand: Gigabyte

Model: E263-S30

Type: User guide

GIGABYTE Easy BIOS Refresh

User’s Guide

Rev.1.0

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 User Manual: detailed information & steps about the installation, conguration and use of this

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

software component (e.g. BMC rmware, rail-kit) compatible with this product.

 Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents.

For More Information

For related product specications, the latest rmware and software, and other information please visit our website at

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller

portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

https://esupport.gigabyte.com/ to create a new support ticket

For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email:

server[email protected]

- 3 -

Table of Contents

Chapter 1 Getting Started ...............................................................................................4

1-1 Update BIOS by Using Gigabyte Server Management Console ...................... 4

1-1-1 DownloadtheBIOSlefromtheWebsite ................................................................4

1-1-2 GigabyteManagementConsoleNetworkConguration ..........................................6

1-1-3 Log In Gigabyte Management Console ....................................................................8

1-1-4 Entering Gigabyte Management Console .................................................................9

1-2 Update BIOS by Using Gigabyte GSM CLI Utility .......................................... 13

1-2-1 Update BIOS1 ........................................................................................................15

1-2-2 UpdateBIOS1andBIOS2(Backupimage) ............................................................17

- 4 -

Easy BIOS

1-1 Update BIOS by Using Gigabyte Server Management Console

Supported Browsers

• Chrome latest version.

• Eage latest version.

• FireFox latest version.

Note: ItisadvisabletouseChromeorIEforH5Viewer,sinceFirefoxhasitsown

memory limitations.

1-1-1 Download the BIOS le from the Website

1. DownloadtheBIOSlefromGigabytewebsite:www.gigabyte.com.

2. Searchyourmodel.

3. Gototheproductpage.

4. Select Support.

5. Select BIOS. Click Download to save the packagele.

Chapter 1 Getting Started

- 5 -

Easy BIOS

6. Choosethefolderlocation.(Savetheletoaknownlocationontheclientsystem)

and Click Save.

7. Go to the location on the client system and extractthepackagele.

Easy BIOS

- 6 -

1-1-2 Gigabyte Management Console Network Conguration

Followtheinstructiontoenabletheconsoleredirectionfunction.

1. YoucangathertheIPaddressonthePOSTscreen.

2. Or,GotoBIOSsetupmenu.

3. Select Server Management.

4. Select BMC network Conguration.

5. DeneCongurationAddresssourcetoDynamicBmcDhcporStatic.

6. Save and Exit.

7. The BMC IP Address will appear on the Station IP address parameter.

- 7 -

Easy BIOS

8. SavethecongurationandexitBIOSsetupmenu.

Easy BIOS

- 8 -

1-1-3 Log In Gigabyte Management Console

ToaccesstheGigabyteManagementConsole,theBMCWebutilitywillpromptyoutoenterthe

UserNameandPassword.

Theeldsareexplainedasfollows:

ForbasiclogintotheBMCWebUI,usethefollowinglogin:

• Username:admin

• Password:RefertouniqueMBserialnumber.

Easy BIOS

- 9 -

1-1-4 Entering Gigabyte Management Console

AfterenteringGigabyteManagementConsolefollowtheinstructionstoupdateBIOS.

1. Go to Power Control,PowerOfftheclient,Perform Action

2. Go to Maintenance page and select Firmware Update.

Easy BIOS

- 10 -

3. ClickBrowseiconandselecttheBIOSimagele.ClickStart rmware updates.

4. SelectBIOS1orBIOS2intheselectBIOSeld.ClickProcess to Flash.

Easy BIOS

- 11 -

5. AfterclickingProceed to Flash,a doubleconrmation dialogboxappears.ClickOKto

processBIOSash.

6. Waitfortheupdatingproceduresiscompleted.

Easy BIOS

- 12 -

7. ClickOKwhentheupdatingprocedureiscompleted.

Easy BIOS

- 13 -

1-2 Update BIOS by Using Gigabyte GSM CLI Utility

Download the BIOS le from the Website

1. DownloadtheBIOSle.Detailinstructions,goto:1-1-1DownloadtheBIOSle

fromtheWebsite.

2. GettheIPaddressonthePOSTscreen.Orgoto1-1-1GigabyteManagement

ConsoleNetworkCongurationforDynamicIPconguration.

Download the Utility le from the Website

1. DownloadGSMCLIutilitypackage(.zip)fromwww.gigabyte.com.

2. Searchyourmodel.

3. Gototheproductpage.

4. Select Support.

5. Select Utility.

NOTE!

• If youareusingOracleJava makesureyourJavaversionislatest versionand

javaws and ipmitool.

• Forotherdetails,pleaserefertoserver_utility_cli_2.1.xx\2.x.xx\docs\GbtReadme.

txtintroduction.

Easy BIOS

- 14 -

6. ClickDownloadtosavethepackagele.

7. SaveGSMCLIpackageinthefollowingpath:C:\BIOSofclientsystem.

8. ExtracttheGSMCLIpackageleinC:\BIOS.

9. SavetheBIOSpackagefileinthefollowingpath:C:\BIOS\server_utility_

cli_2.1.xx\2.1.59ofclientsystem.

Easy BIOS

- 15 -

1-2-1 Update BIOS1

Execute GSM CLI utility with update command to update BIOS1:

1. Powerofftheclientsystem,usagecommand:

java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassisoff

<BMCIP>:TargetsystemBMCIP

<Account>:TargetsystemBMCusername

<Password>:TargetsystemBMCpassword

2. Afterenteringthepoweroffcommand,pressthekeyboard"enter"toshutdown

client system.

3. UpdateBIOS1usagecommand:

java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>updatebios

auto<FWpackage>

<FWpackage>:BIOSupdatermwarepackages.(Onlysupport*.ziple)

4. AfterenteringtheupdateBIOS1command,pressthekeyboard"enter"tostartthe

update.Andwaitupdatestatustocomplete.

Easy BIOS

- 16 -

5. AfterupdateBIOS1completeandsuccess,settargetsystemtopoweron.Usage

command:

java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassison

Easy BIOS

- 17 -

1-2-2 Update BIOS1 and BIOS2 (Backup image)

1. DownloadtheBIOSle.Detailinstructions,goto:1-1-1DownloadtheBIOSle

fromtheWebsite.

2. ExecuteGSMCLIutilitywithupdatecommandtoupdateBIOS1andBIOS2

(Backupimage)

3. Settargetsystemtopoweroff,usagecommand:

java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassisoff

4. UpdateBIOS1andBIOS2(Backupimage)usagecommand:

java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>updatebios

backupimg<FWpackage>.

NOTE!

• Ifupdatebackupimagefailsordamaged,itmaycausesystemcrash.Pleaseprocess

carefully.

Easy BIOS

- 18 -

5. AfterenteringtheupdateBIOS1andBIOS2command,pressthekeyboard"enter"

tostarttheupdate.Andwaitupdatestatustocomplete.

6. PressYtocontinue.

NOTE!

• Theupdateprocessfailuremaycausesystemcrash,ifagreepleaseproceed.

Easy BIOS

- 19 -

Easy BIOS

- 20 -

7. Afterupdatecompleteandsuccess,setclientsystemtopoweron.

Usagecommand:

java-jarGbtUtility-${project.version}.jar-H<BMCIP>-U<Account>-P<Password>chassison

Gigabyte E263-S30 User guide

Gigabyte E263-S30 User guide

Gigabyte E263-S30 User guide

Related papers

Other documents