Page is loading ...
PIERCE ARROW INC.
549 U.S. HWY 287 S.
HENRIETTA, TEXAS 76365
----------------------------------------------------
TOLL FREE 800-658-6301
FAX 940-538-4382
----------------------------------------------------
www.PierceArrow.us
www.YouTube.com/PierceArrowInc
Owner’s Manual:
2T DUMP KIT
Manual Contents
Shipment Contents.......................................................... 2
Recommended Tools........................................................ 2
Shipment Contents
Recommended Tools
Drop Light
Wrenches
Grinder
Welder
Tape Measure
Grommet
Zip Ties
Safety Glasses
Each kit
oers unique parts and may require a dierent installaon process. This guide is intended to help customers
determine if they would like to install the kit on their own or refer to a fabricaon shop.
2 T Dump Kit Installation Overview
2T Specications
Load capacity : 2 tons
Recommended Tools
Drop Light
Wrenches
Grinder
Welder
Tape Measure
Grommet
Zip Ties
Safety Glasses
2 T Dump Kit Installation Overview
Make Year Bed Note Part Number Weight
Ford Standard
Superduty
Superduty
Dodge
GMC
Material Load Density
Birch
Bronze
Cement
Charcoal
Lead
Potatoes
Salt
Slate
Steel
Tile
Material Load Density
Dry Clay
Moist Clay
Coal
Concrete
Copper
Earth
Flour
Glass
Solid Granite
Wheat
Paper
White Pine
Dry Sand
Sandstone
Tar
Tin
How do I determine
cargo weight?
L = (3.5 cu. . / in.) x (W) x (Y)
L =
Y = L
(3.5 cu. . / in.) x (W)
Y =
Which kit ts my truck?
SAFETY PRECAUTIONS
manual for future reference.
GENERAL SAFETY INFORMATION
• Once the kit is installed, the bumper will not be used
for towing purposes. Please place the scker pro-
vided on your truck bumper to remind you or the fol-
lowing owner not to tow.
Operation Recommendations
manufacturer.
ly.
Electrical Installation Recommendations
Breaker Connections
+
+
to the
to the
solenoid
Pump Installation
PumP SPecificationS
recommended (g. 1
GREEN to the small solenoid post
g. 2.
g. 3
BC
B
C
_
2
1
+
Coil 2
MMaster
2
1
+
M
C2
B
_
C
to the
2.
enough in the rear to install the hinges safely.
Preparation
Bed Modications
the mount.
2. Bolt the rear frame hinges to the second hole from
second and third cross
Fit the rear hinges.
into place.
cut of the frame.
2.
Frame Modications
ing in the greased pin.
Connect the hydrau
lic hose to the cylinder.
Then connect the hydraulic
hose to the pump using
the hose is clear from all
the scissor and
are aligned.
Con
nect the scissor
to the upper
the pin and
Electrical Connections
2.
dash that operates your pump.
eliminate sharp edges.
pump.
ing parts.
Completed Project
Pierce Arrow Product Limited Warranty
other legal theory.
06062013
/
