LIGHT MY BRICKS 76209 Operating instructions

Brand: LIGHT MY BRICKS

Model: 76209

Type: Operating instructions

LIGHT MY BRICKS 76209 is a light kit designed specifically for the LEGO® Thor's Hammer (76209) set. The kit includes a variety of LED lights in different colors and sizes, which can be used to illuminate the hammer's various features and details. With this light kit, you can bring your LEGO® Thor's Hammer to life and create a truly stunning display piece.

Here are some of the key features and capabilities of the LIGHT MY BRICKS 76209 light kit:

Multiple LED lights in different colors and sizes: The kit includes a variety of LED lights, including white, blue, and warm white, which can be used to create a variety of different lighting effects.

Here are some of the key features and capabilities of the LIGHT MY BRICKS 76209 light kit:

Multiple LED lights in different colors and sizes: The kit includes a variety of LED lights, including white, blue, and warm white, which can be used to create a variety of different lighting effects.

LEGO® THOR’S HAMMER #76209

LIGHT KIT

INSTALLATION GUIDE

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTALLATION GUIDE 2

Light My Bricks

LEGO® THOR’S HAMMER #76209 LIGHT KIT

INSTALLATION GUIDE

Hi There!

We’re here to help you get started on the LEGO®

Thor’s Hammer (76209) Light Kit.

This PDF details the instructions for the LED light kit only. If

you are wishing to purchase this product, please click here

to view the product page.

If you run into any issues, please refer to the troubleshoot-

ing section towards the end of this guide.

Have fun and enjoy!

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

PACKAGE CONTENTS 3

PACKAGE CONTENTS: ASSORTED BRICKS:

1x White 15cm Bit Light

1x Warm White Large 15cm Bit Light

14x Blue 15cm Bit Light

11x Cool White Large 15cm Bit Light

1x 6-Port Expansion Board

2x 8-Port Expansion Board

1x 12-Port Expansion Board

• 4 x Dark Grey Plate 2x2

• 9x Dark Grey Tile 1x2

• 2x Tile 1x1 W Clip Round Edges - Black

• 3x Plate 1x1 Mod Rounded w Handle - Black

• 4x Round Plate 1x1 Open Stud - Black

• 1x Arm Skeleton, Bent with Clips (Horizontal Grip) - Black

• 1x Plate 1x2 MW Bar Handle on Side - Black

1x NO Push Board

1x Scary Eects Board

1x Flicker Eects Board

6x 5cm Connecting Cable

1 x USB Power Cable

(Power Source not Included)

* Spares included

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

CONTENTS 4

Contents

Before You Begin 5

Blueprint 8

Instructions 9

Final Product 35

Troubleshooting 36

Contact 41

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 5

Before You Begin

Laying cables in between

and underneath bricks

Cables can ﬁt in between and underneath

LEGO® bricks, plates, and tiles providing

they are laid correctly between the

LEGO® studs. Do NOT forcefully join

LEGO® together around cables; instead

ensure they are laying comfortably in

between each stud.

CAUTION: Forcing LEGO® to connect over

a cable can result in damaging the cable

and light.

Connecting Cable

Connectors To Expansion

Boards

Take extra care when inserting connectors

to ports of Expansion Boards. Connectors

can be inserted only one way. With the

expansion board facing up, look for the

soldered “=” symbol on the left side of the

port. The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into the

port. If a plug won’t ﬁt easily into a port

connector, do not force it.

Incorrectly inserting the connector can

can result in bent pins inside the port or

possible overheating of the expansion

board when connected.

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 6

Before You Begin

Connecting Cable

Connectors To Strip Lights

Take extra care when inserting connectors

to ports on the Strip Lights. Connectors

can be inserted only one way. With the

Strip Light facing up, ensure the side of

the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into

a port connector, don’t force it. Doing so

will damage the plug and the connector.

Connecting Micro Cable

Connectors To Micro

Expansion Board Ports

Take extra care when inserting the

micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit

Lights to Micro Expansion Boards is similar

to connecting lights and cables to Strip

Lights. With the expansion board facing

up, ensure the side of the connector with

the wires exposed is facing down. If a plug

won’t ﬁt easily into a port connector, do

not force it. Use your ﬁngernail to push the

plastic part of the connector to the micro

port.

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 7

Before You Begin

Installing Bit Lights Under

Lego® Bricks And Plates

When installing Bit Lights under LEGO®

pieces, ensure they are placed the correct

way up (Yellow LED component exposed).

You can either place them directly on top of

LEGO® studs or in between.

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 8

BLUEPRINT

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 9

INSTRUCTIONS

To ensure a smooth installation of

your light kit, please read and follow

each step carefully. If you run into

any issues, please refer to the online

troubleshooting guide.

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 10

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Cool White 15cm

Large Bit Lights will

always go under Trans

Light Blue 2x1 Slopes.

Cool White 15cm Large Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 11

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Cool White 15cm Large Bit Light

8-Port Expansion Board

Blue 15cm Bit Lights

will always go under

Trans Light Blue 1/2

Slopes.

Blue 15cm Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 12

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Blue 15cm Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 13

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

12-Port Expansion Board

Cool White 15cm Large Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 14

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Cool White 15cm Large Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 15

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Cool White 15cm Large Bit Light

Begin twisting of

the cables a third of

the way down.

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 16

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Connect the

four Cool White

15cm Large Bit

Lights to the 8-Port

Expansion Board

Connect the Blue

30cm Bit Light to the

12-Port Expansion

Board

Blue 15cm Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 17

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Connect the

other end to a USB

Power Bank, USB

Wall Adaptor, or USB

to AA Battery Pack

(sold separately).

If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or

expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

USB Power Cable

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 18

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Cool White 15cm Large Bit Light

Dark Grey Tile 1x2

Blue 15cm Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 19

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Dark Grey Tile 1x2

Blue 15cm Bit Light

LEGO THOR’S HAMMER 76209 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 20

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Cool White 15cm Large Bit Light

Blue 15cm Bit Light

Page is loading ...

LIGHT MY BRICKS 76209 Operating instructions

Brand: LIGHT MY BRICKS

Model: 76209

Type: Operating instructions

Here are some of the key features and capabilities of the LIGHT MY BRICKS 76209 light kit:

Multiple LED lights in different colors and sizes: The kit includes a variety of LED lights, including white, blue, and warm white, which can be used to create a variety of different lighting effects.

Download PDF

report

LIGHT MY BRICKS 76209 Operating instructions

LIGHT MY BRICKS 76209 Operating instructions

Related papers

Other documents