2. SIGMATEK
  3. ETT 1054-W

SIGMATEK ETT 1054-W Template

  • I have reviewed the provided mounting template document for the ETT 1054-W model. It specifies a 1:1 print scale and a 2mm adjustment for the inner cutout. I'm ready to answer any questions you may have about this template.
  • What is the required print scale setting?
    What is the inner cutout dimension adjustment?
264 mm
183 mm
Beim Ausdruck der PDF-Datei ist darauf zu achten,
dass beim Drucken Maßstab 1:1 eingestellt ist.
Innenausschnitt = 2 mm mehr
Inner Cutout = 2 mm additional
When printing the PDF file make sure that the ratio is set 1:1.
ETT 1054-W
/