Chord CT-28 User manual

CT-28 173.256UK

Compact Clip Tuner User Manual

Thank you for choosing a Chord CT-28 compact clip tuner for convenient and accurate tuning of

your instrument. Please read this user guide to ensure you get the most from your new tuner.

Layout

The CT-12 is supplied with a single CR2032 button cell for power, which should be inserted into

the battery compartment at the rear of the tuner display. Slide the compartment cover off and

insert the button cell, ensuring that the polarity is correct and replace the cover.

To operate the tuner, attach the clip to the headstock of your instrument, rotate the display for a

clear view of the LCD screen and hold the On/Off button until the display lights. Short presses of

the On/Off button will set the mode, with options for Chromatic, Guitar, Bass, Violin and Ukulele.

(Ukulele is for a soprano type and to tune a mandolin, use violin mode).

Play a string and observe the detected note on the display, along with the virtual needle showing

the tuning accuracy (flat – in tune – sharp). When in tune to the displayed note, the virtual needle

will be in the centre and the backlight will change colour to green.

When not being used, press and hold the On/Off button to power the tuner down and preserve

the battery. After 3 minutes with no note detected, the tuner will automatically power down.

Specifications

Battery

3V CR2032 button cell

Tuning modes

Chromatic, Guitar, Bass, Violin, Ukulele

Tuning stability

±0.5 cent

Dimensions

73 x 48 x 28mm

Weight

23g

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is

classed as Electrical or Electronic equipment and should not be disposed with other

household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, NewMallow Road, Cork, Ireland

Battery compartment at rear of main display

On/Off & Tuning Mode button

Clip pickup

String number (for instrument tuning modes)

Virtual needle display

Note display

Tuning mode