WITH A WIRE
(EXT)
adjust the size of
the signal eld
•
•
general guidelines when placing the wire
•
•
Creating a Continuous Loop
continuous signal loop for
red
Creating a Signal Field
double wire.
• separated
• There is no signal
Separating the wires increases the size of the signal field as
signal range
•
•
Wire Break Alarm:
alarmred
turned onfrequency
2 3
CAT200
WITHOUT A WIRE
INT
signal range
Place the CAT200 transmitter in
the center of the pet-free area.
Training Flags
around the edge of the
Installation
You cannot use both applications at the same time.
INTwithout a boundary wire.
EXTwith a boundary wire
Training
www.dogwatch.com/customer-resources/cats/training.
• Let your cat get comfortable wearing the collar.
• Mark the Pet Free Area with boundary ags.
Place the
ags at the edge of the warning zone
with
without
• Introduce your cat to the ags and warning beeps
• Introduce your cat to the Avoidance Area.
Safe Area
CAT200
Warning Zone
Correction Zone
Pet-Free
Avoidance Area
When used without an attached wire
The maximum signal range is