OPERATION MANUAL FREN
1. Avoiding using the welder in the surrounding where is harmful, corroding, combustible or explosive gas or substance,
or there is extreme dust.
2. In extreme humidity or dust circumstance, before it is powered, the insulation resistance between the output end and
the input end, and that between the two ends and the respective machines should be measured if it is lower 0.5Ω,it
should not be used before checking and getting rid of the problems.
3. The ground bolt should be connected with ground before it is power and the resistance should not be higher than 0.4Ω.
4. When connecting: the power supply voltage should match with the inputting voltage of the welder, It is forbidden to
connect 220V to 380V.
5. Enough section is available on the welder cable wires and the power line, and the connecting is sound and reliable, the
longer the cable wires are, the more section is needed in order to keep the total voltage than 4V.
6. Operate the welder in accordance with the loading in the nameplate. Otherwise it should be damage because of
extreme heat.
Safety items and Needs to know for using:
Thank you for buying our product, In case correctly using it,
Please at first read this manual carefully
BX1-B,BX1-C series arc welding regulations are macro Ac welders for single-hand operation and supplied with the
electric cables, welding pincers, mask etc.
The welders are extensively used in the small-scaled building business, fix business and agriculture station etc.
Use and Characteristic:
Item BX1-130 BX1-160 BX1-180 BX1-200 BX1-250
Rated export current(A) 130 160 180 200 250
Power sourse voltage(V) 110,230/400 110,230/400 110,230/400 110,230/400 110,230/400
Rated Duty cycle(%) 10 10 10 10 10
Rated input capa-
city(KVA) 7 8 9.5 10.7 14.2
Current adjusting range
(A) 50-130 55-160 60-180 60-200 70-250
Dia of applicable Elec-
trode (mm) 2-2.5 2-3.2 2-4 2-4 2-4
Weight(KG) 14.9 17.3 20 21 22
L*W*H(mm) 360*185*390 380*200*420
Type and specification - Serials BX1-B/B1
OPERATION MANUAL FREN
Item BX1-130 BX1-160 BX1-180 BX1-200 BX1-250
Rated export current(A) 130 160 180 200 250
Power sourse voltage(V) 110,230/400 110,230/400 110,230/400 110,230/400 110,230/400
Rated Duty cycle(%) 10 10 10 10 10
Rated input capa-
city(KVA) 7 8 9.5 10.7 14.2
Current adjusting range
(A) 50-130 55-160 60-180 60-200 70-250
Dia of applicable Elec-
trode (mm) 2-2.5 2-3.2 2-4 2-4 2-4
Weight(KG) 16.5 18 20 21 22
L*W*H(mm) 415*250*370
Serials BX1-C/C1
BX1-B,BX1-C serials arc moving construction, the regulator has three core, The primary coil and secondary coil are fixed
on the central core, The two cores between the coils which are named movable core, make up the magnetic flux move the
cores and change the rival-magnetic so that change regularly the output welding current.
The primary coil is equipped with a temperature-relay, which can cut off the power when the regular coil is hotter than the
standard.BX1-B series products have handy handles. The regulator output wires have convenient-exchange connection
and direct connection. The former is form”1”.
FREN
OPERATION MANUAL
STRUCTURE OF WELDING MACHINE
1. Avoid exposure to rain and beat.
2. Avoid damaging in moving.
3. The bolt nut and other movable parts, keep clean and lubricated.
4. Keep the coil and the insulation surface dry and without dust.
5. When welding, must use the protection tools, and avoid being damaged.
6. Make the working place airy, in case of are light, the working place should be adjusted properly.
The welder should not be keep with the flammable, explosive, and corrodible things together and cover it with dust proof
and waterproof materials if not in use
Maintain and notice items:
-
1
-
2
-
3
