– INSTRUCTION MANUAL –
FOR TABLES
PALISSADE
FIXATION BRACKET
DESIGN BY HAY
PARTS
B
Allen key x1
A
Fixation bracket x4
PARTS
C
O-ring x4
This assembly requires additional equipment
from your household.
1. Insert a self-tapping
screw into the bottom
of the glider.
4. Insert the bracket
into the leg.
5. Align the bracket so it points towards the centre of the
table. Push the bracket down, making sure to leave no gap
between the leg, while tightening the screw.
3. Mount the O-ring to
the bracket.
INSTRUCTION
2. Remove the glider by
gripping the screw firmly and
pulling upwards. You might
have to use a lot of force. Do
not use any tools that could
damage the surface of the leg.
6.
Once the bracket has been added to all four legs, the table is
ready to be fastened to the ground/floor
CARE & MAINTENANCE
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Palissade Collection by scanning the QR code
You can also find the same information here
hay.dk/downloads
Havnen 1 8700 Horsens Denmark
+45 3164 6000 / hay@hay.com
10012023
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
La-Z-Boy 010754 User manual
-
FITNESS REALITY KIDS 8410 Owner's manual
-
Propel Swing Set User manual
-
Backyard Discovery Montpelier Setup Manual
-
Propel Trampolines 9 Station Swing Set User manual
-
Marcy MP-3100 Owner's manual
-
Flow Fitness Glider DCT1200i User manual
-
Stamina 35-1050 User guide
-
Bodyworx LX3100SM User manual
-
Cedar Summit Abbeydale Clubhouse F23920 Installation And Operating Instructions Manual
