Lifetime 90539 Owner's manual

Type
Owner's manual

This manual is also suitable for

Lifetime 90539 is a Triple Threat™ Rod Holder designed to securely hold various types of fishing rods, including spinning, baitcasting, and fly fishing rods, enhancing the fishing experience on your kayak. It features a simple installation process, requiring no tools, and can be mounted on either raised or flat mounting bases. The rod holder effectively locks the rod in place with a plastic latch, ensuring stability during use. The Triple Threat™ Rod Holder is constructed to be stain-resistant and solvent-resistant, making it easy to clean and maintain.

Lifetime 90539 is a Triple Threat™ Rod Holder designed to securely hold various types of fishing rods, including spinning, baitcasting, and fly fishing rods, enhancing the fishing experience on your kayak. It features a simple installation process, requiring no tools, and can be mounted on either raised or flat mounting bases. The rod holder effectively locks the rod in place with a plastic latch, ensuring stability during use. The Triple Threat™ Rod Holder is constructed to be stain-resistant and solvent-resistant, making it easy to clean and maintain.

INSTRUCTION MANUAL
ROD HOLDER
SAVE THIS INSTRUCTION IN THE EVENT THE MANUFAC-
TURER NEEDS TO BE CONTACTED.
TRIPLE THREAT
QUESTIONS?
TOOLS REQUIRED TABLE OF CONTENTS
NO TOOLS REQUIRED
CONTACT LIFETIME® CUSTOMER SERVICE:
Dial 1-800-225-3865
PRODUCT ID:
For Customer Service in Mainland Europe and the
United Kingdom,
Live Chat: www.lifetime.com/customerservice
(click on “LIVE CHAT” tab)
Rod holder assembly........................2
Securing a fishing rod.....................2
Maintenence.........................3
Locate the small plastic tab on the rod holder, and the notch in the plastic
mounting base. Align the tab with the notch and insert the rod holder into
the mounting base as shown.
Rotate the rod holder to lock it in place.
Your kayak may be dierent than
the model shown, but the steps
performed still apply.
ROD HOLDER ASSEMBLY
1
! Please note, the Triple Threat™ Rod
Holder will mount to a raised or flat
mounting base.
!
Notch
Tab
To secure a fishing rod to the rod holder:
1) Place your fishing rod into the rod holder.
2) Lock the rod in place by turning the plastic latch over the top of the rod.
SECURING A FISHING ROD
2
Congratulations on your Lifetime® Products purchase. By following the instructions
below, your new Triple Threat Rod Holder should provide you with years of service and
enjoyment.
Cleaning and Care
The Lifetime® Triple Threat Rod Holder is stain- and solvent-resistant. Most stains can
be removed, using a mild soap and a soft-bristled brush. Abrasive cleaning materials may
scratch the plastic and are not recommended.
Always store your rod holder out of direct sunlight when not in use.
Clean with mild soap and water periodically to keep your product looking new.
The Triple Threat Rod Holder is intended for use with spinning, baitcasting, and fly
fishing rods.
Use of the rod holder for anything other than its intended purpose may damage the
product and will void any applicable warranty.
MAINTENANCE
1
2
Baitcasting Rod
Spinning Rod
Fly Rod
!The Triple Threat Rod Holder
will accomodate most spinning,
baitcasting, and fly fishing rods.
Video Tutorial:
go.lifetime.com/rodholder
Or dial 1-800-424-3865
To purchase accessories or other Lifetime products, visit us at:
www.lifetime.com
www.lifetime.com
ENHANCE YOUR LIFETIME® WATERCRAFT BY ADDING
ACCESSORIES OR OTHER GREAT PRODUCTS
1187497 B 5/05/2023
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Lifetime 90539 Owner's manual

Type
Owner's manual
This manual is also suitable for

Lifetime 90539 is a Triple Threat™ Rod Holder designed to securely hold various types of fishing rods, including spinning, baitcasting, and fly fishing rods, enhancing the fishing experience on your kayak. It features a simple installation process, requiring no tools, and can be mounted on either raised or flat mounting bases. The rod holder effectively locks the rod in place with a plastic latch, ensuring stability during use. The Triple Threat™ Rod Holder is constructed to be stain-resistant and solvent-resistant, making it easy to clean and maintain.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI