13
Modular Setup
Mode
This feature allows you to confi gure
the settings on your Modular
System.
To enter Modular Setup Mode
Press and hold the ‘Standby’
and ‘Local’ keys for
approximately 5 seconds.
A sound will be heard and the
Tuner, Disc and Sat LED’s should
be blinking.
The following table describes the
LED’s which represent the Modular
parameters:
LED (ON)
Modular
Setup Param-
eter
Video 1. Turn on
volume
Video + Aux 1 2. Bass
Video + Aux 1
+ Aux 2 3. Treble
Video + Aux 1
+ Aux 2 +Local
4. Maximum
Volume
Table 2:Modular Setup Parameters
To increase or decrease the setting
for the selected Modular Setup
Parameter press the‘Up’ or
‘Down’ arrow keys respectively.
To accept the current setting and
advance to the next Modular Setup
Parameter press the ‘OK’ key.
To exit Modular setup Mode
either press the ‘OK’ key in
Maximum Volume Mode, or again
hold down the ‘Standby’ and
‘Local’ keys for approximately