2. Sunnydaze Decor
  3. RCM-774
RCM-774

Sunnydaze Decor RCM-774, RCM-LG476, RCM-LG481 Operating instructions

  • Hello! I've reviewed the user manual for the LG481 Raised Garden Bed from Sunnydaze Decor. This document provides detailed assembly instructions, emphasizing the importance of checking parts before assembly and the correct orientation of the side panels. I'm ready to answer any questions you may have about assembling or using this raised garden bed.
  • What should I do before assembling the unit?
    What specific installation tip is outlined?
    When should I tighten all the bolts?
RECTANGLE GALVANIZED STEEL
RAISED GARDEN BED
Read the assembly instructions carefully and follow the care instructions. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
LG481 Page 1 / 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
  
ALong Side Panel 2
BShort Side Panel 2
CCorner 4
DCorner Cap 8
EM6 x 12mm Bolt 16
FNut 16
GHex Key 1
CHOKING HAZARD — This
item contains small parts that
can be swallowed. Keep children
away during assembly.
WARNING
HELPFUL HINT
Do not fully tighten hardware until
     
If hardware is tightened too soon,
mounting holes may not align and parts


ASSEMBLY
NOTE: Install side panels with the rolled
edge facing outward.
1. Align the holes of Long Side Panel (A),
Short Side Panel (B), Corner (C), and
Corner Cap (D) and loosely secure by
hand-tightening Bolt (E) and Washer (F).
2. Repeat Step 1 to connect the remaining
components.
3. Once all components have been loosely
assembled, tighten the hardware using
Hex Key (G).
06/2021
/