Kärcher K 2.110 M User manual

Category
Garden tools
Type
User manual
English 2
Español 17
Français 32
5.961-872.0 01/06
K 2.26 M
2 English
Model Overview 3
Important Safety Instructions 4
Assembly Instructions 5
Operating Instructions 6
Using the Accessories 7
Working with Detergents 8
Taking a Break five minutes or more 9
Shutting Down & Clean-Up 9
Winterizing and Long-Term Storage10
Care and Maintenance Instructions 10
Cleaning Tips 11
Optional Cleaning Accessories 13
Troubleshooting 15
DANGER
indicates “an imminently hazardous sit-
uation which, if not avoided, will result in
death or serious injury.
WARNING
indicates “a potentially hazardous situa-
tion which, if not avoided, could result in
death or injury.”
CAUTION
indicates “a potentially hazardous situa-
tion which, if not avoided, may result in
minor or moderate injury or in property
damage incidents.”
For household use only!
The owner and/or user must have an
understanding of the manufacturer’s
operating instructions and warnings be-
fore using this pressure washer.
Warning information should be empha-
sized and understood.
If the operator is not fluent in English,
the manufacturer’s instructions and
warnings shall be read to and discussed
with the operator in the operator’s native
language by the purchaser/owner, mak-
ing sure that the operator comprehends
its contents.
Owner and/or user must study and
maintain for future reference the manu-
facturers’ instructions.
Call: 1-800-537-4129 for help or visit
our website:
www.karcher-usa.com/home
Please take a moment to register your
pressure washer online at
www.karcher-usa.com/warranty
Call: 1-800-465-4980 for help or visit our
website: www.karcher-canada.com
Call: 01-800-024-13-13 for help or visit
our website: www.karcher.com.mx
HIGH PRESSURE WASHER OPERATOR MANUAL
Safety Alert Symbols
Specifications
Operating pressure 1500 PSI
Water volume 1.3 GPM
Amp draw 13 AMPS
Voltage 120 V
Part No. 1.601-602.0
Serial no.
Owner/User Responsibility
Kärcher Customer Support USA
Kärcher Customer Service CDN
Kärcher Customer Support Mexico
English 3
1 High pressure outlet
2 Detergent suction tube with filter
3 ON/OFF switch
4 Hose/Cord Hook
5 Handle
6 Collapsable transport handle
7 Trigger Gun Holder
8 Power cord with Ground Fault Circuit
Interrupter (GFCI)
9 Water inlet with garden hose
connector
10 Wheels
11 Trigger gun
12 High pressure hose
13 Trigger gun safety lock
14 Dirtblaster® (Rotating spray wand)
15 Vario Power Spray wand
MODEL OVERVIEW
4 English
WARNING – When using this product
basic precautions should always be fol-
lowed, including the following:
Read all the instructions before us-
ing the product.
To reduce the risk of injury, close su-
pervision is necessary when a prod-
uct is used near children.
Know how to stop the product and
bleed pressures quickly. Be thor-
oughly familiar with the controls.
Stay alert – watch what you are do-
ing.
Do not operate the product when fa-
tigued or under the influence of alco-
hol or drugs.
Keep operating area clear of all per-
sons.
Do not overreach or stand on unsta-
ble support. Keep good footing and
balance at all times.
Follow the maintenance instructions
specified in the manual.
This Product Is Provided With A
Ground Fault Circuit Interrupter
Built Into The Power Cord Plug. If
Replacement Of The Plug Or Cord
Is Needed, Use Only Identical Re-
placement Parts.
WARNING – Risk of Injection or Injury –
Do Not Direct Discharge Stream At Per-
sons.
High pressure jets can be dangerous
if misused. The jet must not be di-
rected at persons, animals, electrical
devices, or the unit itself.
Wear safety goggles.
WARNING – Risk Of Explosion – Do
not spray flammable liquids.
Do not use acids and solvents in this
product. These products can cause
physical injuries to the operator and
irreversible damage to the machine.
CAUTION – Gun Kicks Back – Hold
with both hands.
The Trigger Gun Safety Lock pre-
vents the trigger from accidentally
being engaged. This safety feature
DOES NOT lock trigger in the ON
position.
WARNING – Risk of Electrocution –
Inspect cord before using – Do not
use if cord is damaged.
Keep all connections dry and off the
ground.
Do not touch plug with wet hands.
Do not use extension cord with this
product.
Connect to individual branch circuit
only.
SAVE THESE INSTRUCTIONS
In a double-insulated product, two sys-
tems of insulation are provided instead
of grounding. No grounding means is
provided on a double-insulated product,
nor should a means for grounding be
added to the product. Servicing a dou-
ble-insulated product requires extreme
care and knowledge of the system, and
should be done only by qualified service
personnel. Replacement parts for a
double-insulated product must be iden-
tical to the parts they replace. A double-
insulated product is marked with the
words “DOUBLE INSULATION” or
“DOUBLE INSULATED”. The symbol
” may also be marked on the product.
IMPORTANT SAFETY INSTRUCTIONS
SERVICING OF A DOUBLE-
INSULATED PRODUCT
English 5
This product is provided with a ground-
fault circuit interrupter (GFCI) built into
the plug of the power-supply cord. This
device provides additional protection
from the risk of electric shock.
Should replacement of the plug or cord
become necessary, use only identical
replacement parts that include GFCI
protection.
Contact Kärcher Customer Support.
CAUTION
When connecting the water inlet to the
water supply mains, local regulations of
your water company must be observed.
In some areas the unit must not be con-
nected directly to the public drinking wa-
ter supply. This is to ensure that there is
no feedback of chemicals into the water
supply. Direct connection via a receiver
tank or backflow preventer, for example,
is permitted.
Dirt in the feed water will damage the
unit. To avoid this risk, we recommend
fitting a water filter.
Garden hose must be at least 5/8
inch in diameter.
Flow rate of water supply must not
fall below 2 GPM (gallons per
minute).
Flow rate can be determined by run-
ning the water for one minute into an
empty 5-gallon container.
The water supply temperature must
not exceed 104°F/40°C.
Never use the pressure washer to
draw in water contaminated with sol-
vents, e.g. paint thinners, gasoline,
oil, etc.
Always prevent debris from being
drawn into the unit by using a clean
water source.
Î STEP 1:
Insert wheels into the side holes of
the unit.
GROUND FAULT CIRCUIT INTER-
RUPTER PROTECTION
WATER SUPPLY
(Cold Water Only)
ASSEMBLY INSTRUCTIONS
6 English
Î
STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
Î STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
Î STEP 3:
Connect garden hose to unit’s water
inlet.
Î STEP 4:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
Î STEP 5:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
Press “RESET” button.
Press “TEST” button.
Red indicator on “RESET” button
should appear.
Press “RESET” button again for use.
WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may
be different from this illustration.
Î STEP 6:
Unlock the Safety lock. Trigger the
gun to eliminate trapped air, wait for
a steady flow of water to emerge
from the spray nozzle.
Î STEP 7:
Turn on the high pressure washer (I).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.
OPERATING INSTRUCTIONS
English 7
WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
The Vario Power Spray Wand allows
you to adjust the cleaning pressure.
To clean at maximum pressure, the
wand must be positioned to the high
pressure setting (Max).
For lower pressure turn the wand
collar in the minus (Min) direction.
To apply detergent, the wand
must be positioned to the lower
pressure setting (Min).
This nozzle features a 0º pencil jet
which rotates 360º for maximum dirt
cutting action, effectively increasing
cleaning performance up to 50%.
This nozzle combines the cleaning
performance of a 0º pencil jet with
the surface coverage of a wide angle
nozzle.
Not recommended for soft materi-
als, siding, painted surfaces,
decks or autos.
Always test an inconspicuous area
before cleaning with the Dirtblaster
USING THE ACCESSORIES
Vario Power Spray Wand
Dirtblaster®
8 English
Detergents can only be applied at
low pressure (Min.).
Î STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Min.).
Î STEP 2:
Fill a container with Kärcher deter-
gent. Place the filter end of detergent
suction tube into the container.
Î STEP 3:
Turn on the pressure washer (I). Pull
trigger to operate unit: Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
Î STEP 4:
Cleaning up: Always draw fresh wa-
ter through the detergent tank when
done to flush any remaining deter-
gents from the injection system.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
CAUTION
This unit has been designed for use with
cleaning detergents recommended by
the manufacturer. The use of other
cleaning detergents may affect the op-
eration of the machine and void the war-
ranty.
Always Use Kärcher Detergent for
Best Results
Kärcher biodegradable detergents are
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won’t clog the suction
tube filter and will protect the internal
parts of the pressure washer for a long-
er life. For Kärcher Detergents, check
your retailer or visit our website:
www.karcher-usa.com/home
The following Kärcher detergents are
available:
One Gallon ready to use
All Purpose & Vehicle Cleaner
Deck & Patio Cleaner
Heavy Duty Degreaser
Exterior House Cleaner
CAUTION
Never use:
Bleach, Chlorine products and other
corrosive chemicals
Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
Tri-sodium phosphate products
Ammonia products
Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
WORKING WITH DETERGENTS
English 9
Î STEP 1:
Release trigger and engage gun
safety lock.
Î STEP 2:
Turn pressure washer to OFF (O)
position.
Î STEP 1:
Turn the switch to OFF (0) position
and unplug cord from outlet.
Î STEP 2:
Turn off the water source.
Î STEP 3:
Press trigger to release water pres-
sure.
Î STEP 4:
Disconnect the garden hose from
the water inlet on the unit.
Î STEP 5:
Disconnect the high pressure hose
from the high pressure outlet.
Î STEP 6:
Release trigger and engage gun
safety lock.
TAKING A BREAK five minutes or more
SHUTTING DOWN & CLEAN-UP
10 English
Î
1: Disconnect all water connections.
Î 2: Turn on the machine for a few
seconds, until the water which had
remained in the pump exits, turn off
immediately.
Î 3: Do not allow high pressure hose
to become kinked.
Î 4: Store the machine and accesso-
ries in a room which does not reach
freezing temperatures. DO NOT
store near furnace or other sources
of heat as it may dry out the pump
seals.
CAUTION
Failure to follow the above directions
will result in damage to the pump as-
sembly and accessories.
Kärcher also recommends the regular
practice of using a pump protector like
“Kärcher Pump Guard” to help during
storage in the winter months.
Î STEP 1:
Pull out washer from the water inlet.
Î STEP 2:
Pull out water inlet filter with flat-
nose pliers.
Î STEP 3:
Rinse out water inlet filter in warm
water.
Î STEP 4:
Reinsert water inlet filter and washer
into the water inlet.
The unit is maintenance-free.
WINTERIZING AND LONG-TERM STORAGE
CARE AND MAINTENANCE INSTRUCTIONS
Cleaning the water inlet filter Maintenance
English 11
(with or without detergent). Pre-rinse
deck and surrounding area with fresh
water. If using Kärcher Deck Wash, ap-
ply to surface at low pressure. For best
results, limit your work area to smaller
sections of approximately 25 square
feet. Allow Deck Wash to remain on sur-
face 1-3 minutes. Do not allow deter-
gent to dry on surface. Rinse at high
pressure in a long sweeping motion
keeping the spray nozzle approximately
3-6 inches from the cleaning surface.
Always clean from top to bottom and
from left to right. When moving on to a
new section of the cleaning surface, be
sure to overlap the previous section to
eliminate stop marks and ensure a more
even cleaning result.
(with or without detergent). Pre-rinse
cleaning surface with fresh water. If
using Kärcher Pressure Wash, apply to
surface at low pressure (for best results,
limit your work area to sections of ap-
proximately 6 feet and always apply de-
tergent from bottom to top). Allow
Pressure Wash to remain on surface 1-
3 minutes. Do not allow detergent to dry
on surface, if surface appears to be
drying, simply wet down surface with
fresh water. If needed, use special wash
brush attachment (not included) to re-
move stubborn dirt. Rinse at high pres-
sure from top to bottom in an even
sweeping motion keeping the spray
nozzle approximately 6 inches from the
cleaning surface.
(with or without detergent). Pre-rinse
cleaning surface with fresh water. If us-
ing Kärcher Pressure Wash or Degreas-
er, apply to surface at low pressure. For
best results, limit your work area to
smaller sections of approximately 25
square feet. Allow Pressure Wash or
Degreaser to remain on surface 1-3
minutes. Do not allow detergent to dry
on surface. Rinse at high pressure in a
sweeping motion keeping the spray
nozzle approximately 3-6 inches from
the cleaning surface. Always clean from
top to bottom and from left to right. For
removing extremely stubborn stains,
use the Dirtblaster Nozzle.
(with or without detergent). Pre-rinse
vehicle with fresh water. If using Kärcher
Touchless Vehicle Wash, apply to sur-
face at low pressure. For best results,
clean one side of vehicle at a time and al-
ways apply detergent from bottom to top,
do not allow detergent to dry on surface.
If needed, use special wash brush at-
tachment (not included) to remove stub-
born dirt. Rinse at high pressure in a
sweeping motion keeping the spray noz-
zle approximately 6-8 inches from the
cleaning surface (distance should in-
crease when rinsing pin-striping or other
sensitive surfaces). Always clean from
top to bottom and from left to right. For
best results, wipe surface dry with a
chamois or soft dry cloth.
CLEANING TIPS
Deck Cleaning
House Siding
Cement Patios, Brick and Stone
Cars, Boats & Motorcycles
12 English
(with or without detergent). Pre-rinse
cleaning surface with fresh water. If
using Kärcher Pressure Wash or De-
greaser, apply detergent at low pressu-
re. Allow Pressure Wash to remain on
surface 1-3 minutes. Do not allow deter-
gent to dry on surface. Rinse at high
pressure keeping the spray nozzle ap-
proximately 3-6 inches from the cle-
aning surface. For removing extremely
stubborn dirt, it may be necessary to
move the spray nozzle even closer to
the surface for greater dirt cutting ac-
tion.
(with or without detergent). Pre-rinse
furniture and surrounding area with
fresh water. If using Pressure Wash, ap-
ply to surface at low pressure. Allow
Pressure Wash to remain on surface 1-
3 minutes. Do not allow detergent to dry
on surface. If needed use special Wash
Brush Attachment (not included) to re-
move stubborn dirt. Rinse at high pres-
sure in a sweeping motion keeping the
spray nozzle approximately 3-6 inches
from the cleaning surface. For best re-
sults, clean from top to bottom and from
left to right.
Before cleaning any surface an in-
conspicuous area should be cleaned
to test spray pattern and distance for
maximum cleaning results.
If painted surfaces are peeling or
chipping, use extreme caution as
pressure washer may remove the
loose paint from the surface.
When using on surfaces which might
come in contact with food, flush sur-
faces with plenty of drinking water.
For additional cleaning tips, visit our
website at www.karcher-usa.com/
home
Barbecue Grills, Outdoor Power
Equipment & Gardening Tools
Patio & Lawn Furniture
Recommendations
English 13
Optional accessories are available to
further enhance your cleaning capabili-
ties. These accessories are accurate as
of the printing date of this manual.
Please check our website
www.karcher-usa.com/home for pricing
and up-to-date information.
Specially formulated to protect your
pressure washer from freezing, corro-
sion and premature wear. The Pump
Guard also adds lubrication to valves
and seals to prevent sticking. Highly
recommended for all Karcher pressure
washers!
Part No. 9.558-998.0
Attach this accessory to your pressure
washer to quickly pump large quantities
of water out of a standing source, such
as a barrel or bucket. Fits most Karcher
pressure washers up to 2300 PSI.
Part No. 2.637-214.0
Replacement hose fits Kärcher pres-
sure washer with screw-on type gun
connections from 2400psi to 2500psi,
Extension Hose for all Kärcher high
pressure washers between the original
equipment hose and machine up to
2500 psi.
Part No. 2.640-850.0
Need to clean second story windows or
other high areas? Increase the reach of
your pressure washer by up to 66" with
this extension kit. Includes 4 aluminum
sections for variable length. 66" fully as-
sembled. Fits most Karcher pressure
washers up to 2300 PSI. (bayonet)
Part No. 2.640-746.0
For more effortless cleaning of all
smooth surfaces (painted, glass and
plastic) try Karcher's Rotating Wash
Brush. Use it on your automobile, house
siding or windows. The water pressure
from your pressure washer causes the
inner brushes to gently spin, making
your cleaning job much easier. The an-
gle of brush head is adjustable to help
you reach difficult areas. Excellent for
the application of detergent. A must-
have accessory designed for Karcher
pressure washers up to 2300 PSI. (bay-
onet)
Part No. 2.640-743.0
Made with soft bristles that will not harm
painted surfaces. Easily attaches direct-
ly to the trigger gun. Ideal for stubborn
dirt on cars, boats, patio furniture and
other surfaces. Great for applying deter-
gent. Fits most Karcher pressure wash-
ers up to 2300 PSI. (bayonet)
Part No. 2.640-740.0
Optional Cleaning Accessories
Pump Guard
Water Pumping Kit
25 Ft. Extension / Replacement
High-Pressure Hose
66" Extension Wand (Four piece)
Rotating Wash Brush (bayonet)
Soft Clean Washing Brush
14 English
Need to clean blocked pipes, drains or
downspouts? Karcher's pipe cleaning
kit is the answer! The pipe cleaner pro-
pels itself forward while simultaneously
flushing out debris. For example, insert
the cleaning nozzle in the base of a
downspout, pull the trigger on the pres-
sure washer gun and watch as the noz-
zle shoots out leaves and other debris
while climbing upward. Connects direct-
ly to the trigger gun of most Karcher
pressure washers up to 2300 PSI. (bay-
onet)
Part No. 2.640-747.0
Why spend hours stripping old paint and
rust by hand using harsh chemicals?
Let Karcher's Wet Sandblasting Kit do
the work! Attach the kit to your pressure
washer, add abrasive material and at-
tack the rust and paint with our eco-
friendly alternative. Fits most Karcher
pressure washers up to 2300 PSI. (bay-
onet)
Part No. 2.638-792.0
Ideal for applications which require a
thick foam. Simply fill the resevoir cup
with liquid pressure washer detergent to
generate a foam spray. Connects di-
rectly to the trigger gun. Fits most
Karcher pressure washers up to 2300
PSI. (bayonet)
Part No. 6.964-507.0
For cleaning surfaces such as patios,
terraces and driveways without splash-
back, there is no better solution than
Karcher's T 100. It saves time by clean-
ing a one foot wide area gently as it hov-
ers, providing consistent, streak-free
cleaning. When you finish cleaning the
patio and driveway, remove the wand
and use the handle to clean garage
doors and other vertical surfaces. In-
cludes two nozzles which spin at high
speed for optimum results. Our top sell-
ing accessory for Karcher pressure
washers up to 2300 PSI. (bayonet)
Part No. 2.640-959.0
25 ft. Pipe Cleaning Kit (bayonet)
Wet Sandblasting Kit (bayonet)
Detergent Foamer Attachment
T 100 Wide Area Surface Cleaner
English 15
CAUTION
Disconnect the machine from the power
source before making any repair.
Troubleshooting
Symptom Cause Solution
Motor will not start On/Off switch is in the “OFF”
(O) position.
Turn switch to the “ON” (I)
position
Tripped GFCI plug. Press “RESET” button on
GFCI plug.
Power cord is not plugged in. Plug in power cord.
Electrical outlet does not
supply adequate power.
Try a different outlet.
Unit does not reach
high pressure.
Diameter of garden hose is
too small.
Replace with a 5/8 inch or
larger garden hose.
Water supply is restricted. Check garden hose for kinks,
leaks and blockage.
Not enough inlet water
supply.
Open water source full force.
Water inlet filter is clogged. Remove filter and rinse out in
warm water.
Spray wand is on low
pressure position.
Turn spray wand to high
pressure position.
Output pressure
varies high and low.
Not enough inlet water
supply.
Turn water on full force.
Check garden hose for kinks,
leaks or blockage.
Pump is sucking air. Check that hoses and fittings
are air tight. Turn off machine
and purge pump by
squeezing trigger gun until a
steady flow of water emerges
through the nozzle.
Water inlet filter is clogged. Remove filter and rinse out in
warm water.
Discharge nozzle is
obstructed.
Blow out or remove debris
with a fine needle.
Calcified gun, hose or spray
wand.
Run distilled vinegar through
detergent suction tube.
16 English
If you encounter any additional difficul-
ties not listed, please call
1-800-537-4129 for help or visit our
website: www.karcher-usa.com/home
Call: 1-800-465-4980 for help or visit our
website: www.karcher-canada.com
Call: 01-800-024-13-13 for help or visit
our website: www.karcher.com.mx
No detergent. Detergent suction tube not
properly connected to the
machine.
Check connection.
Detergent is too thick. Dilute detergent, for best re-
sults use Kärcher detergent.
Filter on detergent suction
tube is clogged.
Run warm water through filter
to remove debris.
Damaged or clogged
detergent suction tube.
Remove obstruction or re-
place detergent suction tube.
Spray wand is in high
pressure position.
Turn spray wand tip to low
pressure position.
Discharge nozzle is
obstructed.
Blow out or remove debris
with fine needle.
Garden hose con-
nection leaks.
Loose fittings. Tighten fittings.
Missing/worn rubber washer. Insert new washer.
Spray wand leaks. Spray wand not properly
attached.
Insert the spray wand into the
trigger gun. Carefully press in
against the spring tension
and twist into the locked
position.
Broken o-ring or plastic insert. Call Customer Support
Pump is noisy. Pump is sucking air. Check that hoses and fittings
are air tight. Turn off machine
and purge pump by squeez-
ing trigger gun until a steady
flow of water emerges
through the nozzle.
Water leaks from
pump (up to 10 drops
per minute is permis-
sible).
Loose fittings. Check that all fittings are
tight.
Water seals are damaged or
worn.
Call Customer Support
Oil Drip. Oil seals are damaged or
worn.
Call Customer Support
Symptom Cause Solution
Kärcher Customer Support USA
Kärcher Customer Service CDN
Kärcher Customer Support Mexico
Español 17
Vista General del Modelo 18
Instrucciones de Seguridad
Importantes 19
Instrucciones de Montaje 20
Instrucciones de Funcionamiento 21
Utilización de los Accesorios 22
Trabajar con Detergentes 23
Tomarse un Descanso de cinco
minutos o más 24
Apagado y Limpieza 24
Instrucciones de Conservación y
Mantenimiento 25
Consejos de Limpieza 26
Accesorios de Limpieza Opcionales28
Localicación y reparación de averías30
PELIGRO
indica “una situación de peligro inmi-
nente que, si no se evita, puede causar
lesiones graves e incluso la muerte”.
ADVERTENCIA
indica “una situación de peligro poten-
cial que, si no se evita, puede causar le-
siones e incluso la muerte”.
ATENCIÓN
indica “una situación de peligro poten-
cial que, si no se evita, puede causar le-
siones de poca importancia o leves", o
daños materiales.
Sólo para uso doméstico.
El propietario y/o el usuario deben com-
prender bien las instrucciones de servi-
cio y advertencias del fabricante antes
de empezar a utilizar este limpiador de
alta presión.
Debe prestarse especial atención y te-
ner muy claras las advertencias.
Si el operador no habla bien el inglés, el
propietario/comprador debe responsa-
bilizarse de leer y comentar las instruc-
ciones y las advertencias en su lengua
natal, y asegurarse de que entienda a la
perfección su contenido.
El propietario y/o el usuario deben leer
y guardar como referencia para el futuro
las instrucciones del fabricante.
Llame al: 1-800-537-4129 si necesita
ayuda o visite nuestra página Web:
www.karcher-usa.com/home
Por favor, dedique unos minutos a re-
gistrar su aparato de lavado a presión
en www.karcher-usa.com/warranty
Llame al: 1-800-465-4980 si necesita
ayuda o visite nuestra página Web:
www.karcher-canada.com
Llame al: 01-800-024-13-13 si necesita
ayuda o visite nuestra página Web:
www.karcher.com.mx
Manual de usario del Limpiador de Alta Presiòn
Símbolos de aviso de seguridad
Especificaciones
Presión de trabajo 1500 PSI
Volumen de agua 1.3 GPM
Amperaje 13 AMPS
Voltaje 120 V
Nº de pieza 1.601-602.0
Nº de serie
Responsabilidades del
propietario/usuario
Soporte Kärcher EE.UU.
Soporte Kärcher CDN
Soporte Kärcher Mexico
18 Español
1 Salida de alta presión
2 Tubo de succión de detergente con
filtro
3 Interruptor de encendido/apagado
4 Soporte para manguera/cable
5 Asa de transporte
6 Carro de transporte
7 Zona de recogida, pistola
8 Cable de potencia con interruptor de
circuito de avería por puesta a tierra
9 Toma de agua con conector para
manguera de jardín
10 Ruedas
11 Pistola de disparo
12 Manguera de alta presión
13 Pestillo de seguridad de la pistola de
disparo
14 Dirtblaster
®
(pulverizador
telescópico rotatorio)
15 Pulverizador telescópico variable
Vista General del Modelo
Español 19
ADVERTENCIA
Al utilizar este producto, tome
siempre las precauciones básicas, in-
cluidas las siguientes:
Lea todas las instrucciones antes de
utilizar el producto.
Para reducir el riesgo de lesiones,
es necesario extremar las precau-
ciones cuando se utilice el aparato
cerca de niños.
Tiene que saber cómo parar el apa-
rato y purgar la presión rápidamen-
te. Familiarícese con los controles.
Esté alerta; mire lo que esté haciendo.
No haga funcionar el producto si
está cansado o si está bajo los efec-
tos del alcohol o las drogas.
Mantenga la zona en la que esté lim-
piando libre de personas.
No se alargue demasiado sobre una
base ni se ponga sobre una base
inestable. Mantenga en todo mo-
mento una buena base de apoyo y
un buen equilibrio.
Siga las instrucciones de manteni-
miento especificadas en el manual.
Este producto se suministra con un
interruptor de circuito de avería por
puesta a tierra, que está montado
en el enchufe del cable de potencia.
Si es necesario reemplazar el en-
chufe o el cable, utilice sólo piezas
de repuesto idénticas.
Riesgo de inyección o lesiones a
personas; no dé con el chorro direc-
tamente a personas.
Los chorros de alta presión pueden
ser peligrosos si se utilizan mal. El
chorro no debe ser enfocado a per-
sonas, animales, aparatos eléctricos
ni al aparato mismo.
Póngase gafas protectoras.
No utilice ácidos ni disolventes con
este producto.. Estos productos
pueden causar lesiones físicas al
usuario y daños irreversibles al apa-
rato.
Para reducir el riesgo de electrocu-
ción, mantenga todas las conexio-
nes secas y alejadas del suelo. No
toque el enchufe con las manos mo-
jadas.
El pestillo de seguridad de la pistola
de disparo EVITA que la pistola se
dispare accidentalmente. Esta ca-
racterística de seguridad NO blo-
quea el disparo en la posición de
encendido.
No se debe usar el cable de exten-
sión para esta máquina.
GUARDE ESTAS INSTRUCCIONES.
Los artefactos con doble aislamiento ti-
enen dos sistemas de aislamiento en
vez de conexión a tierra. Esto significa
que no trae medios de conexión a tierra
y que tampoco se le debe agregar uno.
El mantenimiento de estos artefactos
exige mucho cuidado y conocimiento
del sistema y sólo debe hacerlo perso-
nal calificado de servicio. Las piezas de
repuesto deben ser idénticas a las origi-
nales.Los artefactos con doble aisla-
miento están marcados "DOUBLE
INSULATION" o "DOUBLE INSULA-
TED". También podría tener el símbolo
”.
Instrucciones de Seguridad Importantes
MANTENIMIENTO A UN
ARTEFACTO QUE TIENE DOBLE
AISLAMIENTO
20 Español
Este producto se suministra con un inte-
rruptor de circuito de avería por puesta a
tierra montado en el enchufe del cable de
potencia. Este aparato proporciona una
protección adicional contra el riesgo de
electrochoque. Si la corriente se inte-
rrumpe en la línea, el interruptor de circui-
to de avería por puesta a tierra volverá a
cerrar, automáticamente, el circuito a la
carga una vez restablecida la corriente.
Si es necesario reemplazar el enchufe o
el cable, utilice piezas idénticas.
ATENCIÓN
Al conectar la toma de agua a la red de
suministro del agua, es obligatorio res-
petar la normativa local establecida por
la compañía del agua. En algunas zo-
nas, está prohibido conectar la unidad
directamente a la red pública de sumi-
nistro de agua potable. Esto es así para
garantizar que no penetren sustancias
químicas en la red de suministro del
agua. Sí se permite efectuar la co-
nexión directamente por ejemplo a tra-
vés de un depósito receptor o un
dispositivo antirretorno.
Si el agua de alimentación está sucia, la
unidad sufrirá daños. Para evitar este
riesgo, le recomendamos que monte un
filtro de agua.
La manguera de agua tiene que te-
ner al menos 5/8 pulgadas de diá-
metro.
El caudal de agua no debe ser infe-
rior a 2 GPM (galones por minuto).
El caudal de agua se puede determi-
nar llenando de agua un recipiente
vacío de 5 galones durante un minu-
to.
La temperatura de la toma de agua
no de be sobrepasar los 104°F/40°C.
No utilice nunca el limpiador a pre-
sión para aspirar agua contaminada
con disolventes como, p. ej., dilu-
yentes de pintura, gasolina, aceite,
etc.
Evite siempre que la unidad aspire re-
siduos utilizando una fuente de abas-
tecimiento cuya agua esté limpia.
Î PASO 1:
Insert wheels into the side holes of
the unit.
Protección mediante interruptor de
circuito de avería por puesta a tierra
Suministro de agua
(sólo agua fría)
Instrucciones de Montaje
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Kärcher K 2.110 M User manual

Category
Garden tools
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI