NEUTRAL EN 3482/2480 - 2 IN Program Chart

Type
Program Chart

This manual is also suitable for

5019 419 61371
EN 3482-2 PRODUCT DESCRIPTION SHEET
CH
Operation of electric hotplates
Set the knob to one of positions 1-6,
which correspond to different
temperatures.
To switch off the hotplate, set the knob
to position ³0´.
Note: cooktop functions are explained in the
separate ³Oven or Control Box Product
Description Sheet´.
DIMENSIONS OF COOKTOP AND WORKTOP
NOTE: in case of installation of a hood above the cooktop, please refer to
the hood instructions for the correct distance.
1. Rapid hotplate Ø 180 - 2000 W
2. Rapid hotplate Ø 145 - 1500 W
3. Rapid hotplate Ø 180 - 2000 W
4. Normal hotplate Ø 145 - 1000 W
The hotplate control knobs are on the oven
control panel.
Note: models equipped with one or more
fast hotplates are identified by the presence
of a red dot at the center of the rapid
hotplate(s).
  • Page 1 1

NEUTRAL EN 3482/2480 - 2 IN Program Chart

Type
Program Chart
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI