Avista NUMINA Assembly Instructions

1-1: Screw N with I & J(B 4x)

1-2: Screw M with I & J(B 4x)

1-3: Screw L & K with I & J(A 6x)

*Note: Make sure flat surface holes

are facing upward.

2-1: Screw G into O.

2-2: Screw in A.

2-3: Screw in B.

*Note: Make sure this is

facing upward.

Screw in U into P(C 4X)

4-1:Place U ontop of O.

4-2: Screw the bolts C & D together

Insert E into flat surface holes.

*Note: Make sure flat surface holes

are facing upward.

Place Q,R & S onto TV Stand.

7-1: Choose the correct screws from S1-S8 that fit your TV.

(Please refer to your TV user manual for more information.)

7-2: Screw T on back of your TV then hang the TV onto P.

7-3: Place F to secure the TV.

WE HOPE YOU ENJOY YOUR NEW NUMINA TV STAND

THANK YOU FOR CHOOSING AVISTA!!!

IF YOU HAVE ANY QUESTIONS OR CONCERNS,PLEASE CONTACT US AT (866)444-3739