ALLINFUN 0110007 Assembly Instructions Manual

Brand
ALLINFUN
Model
0110007
Type
Assembly Instructions Manual
Assembly Instructions
*Important: Retain these instructions for future reference.
*This toys box dimension of 23-5/8 in. ( 600mm ) in Length and 15-9/16 in. ( 396mm ) in width and 20-1/16 in. ( 510mm ) in high
*This toy box can be placed not over than 40 kgs / 88 lbs inside.
*Before assembly, inspect toy box for damaged hardware, loose joints, missing pieces or sharp edges.
*DO NOT use toy box if any parts are missing or damaged. Do not substitute parts.
*Note: Please read instructions before starting to assemble
*Any question or assistance needed, please browse our website at
*Thank you for your purchase of Warner Bros. Entertainment Inc. licensed wood products by “ALLINFUN” For safety and long lasting usage please
follow the instructions provided for assembly.
Customer Service 1-888-724-8308 / www.allinfunkidsfurniture.com
www.allinfunkidsfurniture.com
3 ~ 12 years
BATMAN and all related characters and elements © & DC Comics. (s15)
TM
Page 1 of 6
BATMAN TOY BOX
TM
Customer Service 1-888-724-8308 / www.allinfunkidsfurniture.com
DO NOT . Do not
USE AND MAINTENANCE:
use toy box if any parts are missing or damaged substitute parts.
* Use on level surfaces only
* Please check assembly at regular intervals, and frequently tighten hardware if necessary. If maintenance is not carried out, the product could cease
to function properly.
Assembly Accessories Chart
32
1
Assembly Accessories Hardware Chart
1 PCS 1 PCS 1 PCS 1 PCS 1 PCS1 PCS
4 5 6
A B C D E F
G H I
J
7
1 PCS
2 PCS 2 PCS 12 PCS 3 PCS 1 PCS 4 PCS
8 PCS 8 PCS 10 PCS
Not included
Phillips Screwdriver
Not included
Flathead Screwdriver
INCLUDED
CAUTION:
ADULT ASSEMBLY REQUIRED.
Hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small childern
Do not allow children to play inside with lid closed. in
certain stulations, sufficlent air may not be avallable
for breathing.
CAUTION:
0-3
BATMAN and all related characters and elements © & DC Comics. (s15)
TM
Page 2 of 6
Assembly Instructions
BATMAN TOY BOX
TM
Customer Service 1-888-724-8308 / www.allinfunkidsfurniture.com
F
F
F
F
2
1
E
Assembly Step 1
Assembly Step 2
1
2
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
C
C
C
C
D
2
1
C
C
C
D
1
2
C
When you let go
of the lid it should
stop, not fall or
slam shut.
Check periodically to
make sure the lid is not
falling shut. If the lid is
starting to slowly fall shut,
adjust the braking tension
(set screw) with a 4 mm
hex key until the lid will
remain open when you let
go of it.
Incorrect
correct
Incorrect
IMPORTANT: Lid support mechanism
must be installed properly ( step 2 ) or
a head/neck entrapment may exist.
Check to make sure the Lid Support is
properly installed by moving it back
and front. When you let go of the lid it
should stop, not fall or slam shut.
IMPORTANT:DO NOT TIGHTEN SCREWS OR
BOLTS UNTIL COMPLETELY ASSEMBLED
0-3
BATMAN and all related characters and elements © & DC Comics. (s15)
TM
Page 3 of 6
Assembly Instructions
BATMAN TOY BOX
TM
Customer Service 1-888-724-8308 / www.allinfunkidsfurniture.com
CAUTION:
ADULT ASSEMBLY REQUIRED.
Hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small childern
Do not allow children to play inside with lid closed. in
certain stulations, sufficlent air may not be avallable
for breathing.
CAUTION:
Assembly Step 3
Assembly Step 4
I
A
4
3
B
3
A
I
4
3
B
H
H
H
H
3
4
7
5
6
I
I
I
I
G
G
G
G
IMPORTANT:DO NOT TIGHTEN SCREWS OR
BOLTS UNTIL COMPLETELY ASSEMBLED
0-3
BATMAN and all related characters and elements © & DC Comics. (s15)
TM
Page 4 of 6
Assembly Instructions
BATMAN TOY BOX
TM
Customer Service 1-888-724-8308 / www.allinfunkidsfurniture.com
CAUTION:
ADULT ASSEMBLY REQUIRED.
Hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small childern
Do not allow children to play inside with lid closed. in
certain stulations, sufficlent air may not be avallable
for breathing.
CAUTION:
Assembly Step 5
Complete Assembly
1
2
H
H
H
H
I
I
B
5
6
3
7
G
G
G
G
I
A
I
I
1
4
B
IMPORTANT: Lid support mechanism
must be installed properly ( step 2 ) or
a head/neck entrapment may exist.
Check to make sure the Lid Support is
properly installed by moving it back
and front. When you let go of the lid it
should stop, not fall or slam shut.
IMPORTANT:DO NOT TIGHTEN SCREWS OR
BOLTS UNTIL COMPLETELY ASSEMBLED
0-3
BATMAN and all related characters and elements © & DC Comics. (s15)
TM
Page 5 of 6
Assembly Instructions
BATMAN TOY BOX
TM
Customer Service 1-888-724-8308 / www.allinfunkidsfurniture.com
CAUTION:
ADULT ASSEMBLY REQUIRED.
Hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small childern
Do not allow children to play inside with lid closed. in
certain stulations, sufficlent air may not be avallable
for breathing.
CAUTION:
Warning:
Important Information –Please Read First
This is intended for children of a specific age or above. Keep children younger than the specified age from using this item. Do
not let children of any age climb on or around this item. Adult supervision is always recommended.
All of our wooden items are handcrafted, hand assembled, and hand painted. Each one is unique. Slight imperfections may
occur and are not manufacturing Defects.
Please noted that we do not warranty against the use of permanent markers, non- water-based paints, crayons, or washable
markers. Some of these items contain permanent color dyes that could damage the surface.
Cleaning Instructions
Clean the surface using a slightly damp cloth and mild dish washing liquid if necessary. Do not use any cleaning product
containing alcohol or ammonia. These will dull the shiny surface of the product. Furniture polish will also to clean and dust off
the surface.
We recommend that you test all cleaning materials on the underside of any surface that would not be seen during normal use
of the product. If you have questions regarding the maintenance of this product please feel free to call us.
EVER-BRIGHT GIFTS LIMITED
15F.-5, NO,91,ZHONGSHAN 2ND RD., QIANZHEN
Designed in USA.
MADE IN VIETNAM
DIST., KAOHSIUNG CITY , TAIWAN
ASTM-F963 / F834 / CPSC / CPSIA
California 93120 compliant for formaldehyde phase 2
CAUTION:
ADULT ASSEMBLY REQUIRED.
Hardware contains small screws with sharp points.
Keep unassembled parts out of the reach of small childern
Do not allow children to play inside with lid closed. in
certain stulations, sufficlent air may not be avallable
for breathing.
CAUTION:
0-3
Page 6 of 6
www.allinfunkidsfurniture
BATMAN and all related characters and elements © & DC Comics. (s15)
TM
Customer Service 1-888-724-8308 / www.allinfunkidsfurniture.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ALLINFUN 0110007 Assembly Instructions Manual

Brand
ALLINFUN
Model
0110007
Type
Assembly Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents