Ascent 25-C1
Below you will find brief product information for Ascent 25-C1:
- Controls gate operators or other devices with up to two relays.
- Wireless connectivity using a SIM card (either your own or one provided by the manufacturer).
- Status check to monitor the position of the gate or door.
- Event input to trigger actions based on external events, such as a request to exit.
- Compatible with 12-24 VAC/DC power sources.
- Easy installation with clear instructions and labeled components.
Possible use cases:
- Remotely control and monitor gates or doors using a smartphone app.
Ascent 25-C1
Below you will find brief product information for Ascent 25-C1:
- Controls gate operators or other devices with up to two relays.
- Wireless connectivity using a SIM card (either your own or one provided by the manufacturer).
- Status check to monitor the position of the gate or door.
- Event input to trigger actions based on external events, such as a request to exit.
- Compatible with 12-24 VAC/DC power sources.
- Easy installation with clear instructions and labeled components.
Possible use cases:
- Remotely control and monitor gates or doors using a smartphone app.
Model 25-C1
1 of 4
START HERE
2
Remove screws and cover of unit for
access to internal components.
What’s what?
All the important components
labeled for you
WARNING!
AUTOMATIC GATES CAN CAUSE
SERIOUS INJURY OR DEATH!
ALWAYS CHECK that the GATE PATH IS
CLEAR BEFORE OPERATING!
Reversing or other safety devices should
ALWAYS BE USED!
Continued on next page...
IMPORTANT!
r
Ascent WILL NOT WORK until the
activation process is COMPLETE!
Follow the Activation Guide or call
Summit Control at (844) 259-8265 to
activate your unit.
We recommend mounting Ascent C1 inside
the gate operator or other weatherproof
enclosure when possible.
If mounting inside a metal enclosure, the
Ascent 10' Cable Extension (p/n 16-X-EXT)
is required. Follow the instructions included
with the cable extension before moving on.
Failure to do so may result in no signal!
IMPORTANT!
r
SIM Card
If you have your own SIM card, see page 4
and follow the instructions entitled,
Installing a Third-Party SIM Card.
Connection Terminals
For wiring to all external devices including
gate operator or door opener
Power Terminals
For wiring to compatible AC/DC power source
Cable Gland
For sealing cable pass-through
Unit shown with cover removed.
Internal wiring not shown for clarity.
QUICK START GUIDE
1
Carefully unpack box.
Model 25-C1
2 of 4
5
Replace and secure front cover with
included screws.
4
Tighten cable-gland locknut.
Now follow the Activation Guide to create
an account and begin using Ascent.
INSTALLATION COMPLETE!
N
QSG-25C1-EN Rev. D (9/2017)
3
Connect wires
Feed wires through back of
unit and connect as shown.
Ascent Connection Terminals
12–24 VAC/DC
POWER
RELAY ARELAY BEVENTDIGITAL INPUTSSTATUS
Gate Operator / Door Opener
POS. (+)
NEG. (–)
COM
RADIO
COM
REVERSE LOOP
COM
OPEN
STOP
CLOSE
Relay B can be wired to a second device
in the same manner.
N/C
COM
FREE EXIT
COM
N/O
N/C
COM
N/O
CLOSE
GND
OPEN
GND
N/O
GND
# 2
GND
# 1
J7 J8 J9 J6 J5 J4
QUICK START GUIDE
12–24 VAC/DC
POWER
POS. (+)
NEG. (–)
+
–
J3
Ascent
Power
Terminals
12-V AC/DC Adapter
Model PS-12DC1
The GROUND terminal is optional unless
required by local code(s). If using, please
connect to earth ground or equivalent.
OR
Third-Party 12–24-VAC/DC
Power Source
Additional wiring diagrams
can be found on Page 3.
© 2017 Security Brands, Inc. All rights reserved.
Before going forward,
double check wiring and
ensure unit has power!
For additional wiring
options, see Page 3.
STOP!
If you will not be using the 12-V AC/DC adapter,
please go to Page 4 and follow the procedure,
Using a Third-Party Power Source.
Do not exceed 24 VAC/DC! Failure to choose a
compatible power source can damage unit!
CAUTION!
Model 25-C1
3 of 4
RELAY ARELAY BEVENTDIGITAL INPUTSSTATUS
J7 J8 J9 J6 J5 J4
A
Status Check
Wiring to enable Gate Status Check
(if equipped with limit switches)
Open Limit Switch
Close Limit Switch
Optional
wire
splices
N/C
N/C
Gate Operator
B
Event Input
Wiring for accessories such as a request-to-exit device
Request-to-Exit
(Summit Access Control S-RTE-P is shown)
Connected as
shown in Step 3
Ascent Connection Terminals
RELAY ARELAY BEVENTDIGITAL INPUTSSTATUS
N/C
N/C
COM
N/O
GND
N/O
GND
# 2
GND
# 1
J7 J8 J9 J6 J5 J4
COM
N/O
COM
N/O
CLOSE
GND
OPEN
COM
N/O
Connected as
shown in Step 3
Ascent Connection Terminals
N/C
N/C
COM
N/O
GND
# 2
GND
# 1
CLOSE
GND
OPEN
COM
N/O
GND
N/O
QUICK START GUIDE
Model 25-C1
4 of 4
Installing a
Third-Party
SIM Card
(Optional)
3a
Connect wires to unit as shown in
Step 3.
3b
Connect wires to your power source,
making sure you connect positive to
positive and negative to negative.
CAUTION!
Double check that you’ve wired from
positive on Ascent to positive on your
power source and negative on Ascent to
negative on your power source.
Reverse polarity can damage Ascent!
Using a
Third-Party
Power Source
(Optional)
IMPORTANT!
r
If you would like to use a third-party
power source, such as solar, verify that
it conforms to the following specs:
Input 12–24 VAC/DC
no more than 10% beyond this range
Current Draw less than 90 mA @ 12 VDC
less than 60 mA @ 24 VDC
QUICK START GUIDE
1
Push existing SIM card in until it
unlocks with “click” sound.
2
Remove existing SIM card and locate
new SIM card.
3
Insert new SIM card until it locks in
place with “click” sound.
QSG-25C1-EN Rev. D (9/2017)
© 2017 Security Brands, Inc. All rights reserved.
?
NEED HELP
Call (844) 259-8265
Text (720) 386-4627
Email [email protected]
We are available Mon–Fri / 8am–5pm Central
-
1
-
2
-
3
-
4
Ascent 25-C1
Below you will find brief product information for Ascent 25-C1:
- Controls gate operators or other devices with up to two relays.
- Wireless connectivity using a SIM card (either your own or one provided by the manufacturer).
- Status check to monitor the position of the gate or door.
- Event input to trigger actions based on external events, such as a request to exit.
- Compatible with 12-24 VAC/DC power sources.
- Easy installation with clear instructions and labeled components.
Possible use cases:
- Remotely control and monitor gates or doors using a smartphone app.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
AAS Ascent T1 Quick start guide
-
SECURITY BRANDS 16-M4 User guide
-
SECURITY BRANDS 14-RTE433T User guide
-
SECURITY BRANDS 16-M7 User guide
-
SECURITY BRANDS Ridge RTE User guide
-
SECURITY BRANDS 14-RTE433T User guide
-
SECURITY BRANDS 16-M1 User guide
-
-
Vertu RM-267V Quick Manual
-
SEAV LRX 2247 Owner's manual
