Bauknecht WAK 7518 S Program Chart

Brand: Bauknecht

Model: WAK 7518 S

Type: Program Chart

GB PROGRAMME CHART

5019 401 05458

❉

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Only selectable within the temperature range of 40 - 60°C.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of

Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the

instructions on the garment label and those issued in this programme chart. M0620

Programme

Tempe-

rature

Care

Labels

Max

Load

Type of wash/Notes

- Respect the manufacturer's recommendations on the care label

Detergents and additives Special options Start

delay

Spin

Pre-

wash

Main

wash

Softener Pre-

wash

Rinse

hold

Intensive

rinse

Eco Steam

sanitization

Steam stain

removal

Spin

Max

Spin

Speed

rpm

White Cotton /

Hygienic +

70 - 95 °C

7.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.

made of cotton and linen.

At a temperature of 80°C or more, this programme eliminates bacteria, ensuring

sanitization of your laundry. The bacteria removal efficiency has been tested

following a similar methodology to the NF EN 13697 standard of Nov. 2001.

❉

Yes

❉❉❉❉❉ ❉ ❉ ❉❉

max.

Coloured

Cotton

20 - 60 °C

7.0

SuperEco

20 - 60 °C

7.0

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.

made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to

be run overnight to additionally profit from the more favourable energy rates. To avoid

noise of spinning at night, set spin speed to “0” and start spin programme in the

morning, or define programme start with “Start delay” accordingly.

—

Yes

❉

—

❉❉

—— —

❉❉

max.

Synthetics

20 - 60 °C

3.0

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

❉

Yes

❉❉❉❉❉ ❉ ❉ ❉❉

max.

Daily load

20 - 60 °C

4.0

Slightly to normally soiled textiles made of cotton and/or synthetics.

—

Yes

❉

—

❉❉

—— —

❉❉

max.

Quick wash

20 - 30 °C

4.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends

with cotton.

—

Yes

❉

—

❉

—— — —

❉❉

max.

Steam Refresh

—

1.0

Clean and dry laundry items made of cotton and/or synthetics which were already used.

Refreshes, reduces smells, moderates creasing and makes the items ready to wear or

use within 20 minutes. After programme end, immediately put the laundry on hangers

for 10 minutes before using. During this programme “St” appears on the display.

————— —— — —

❉

——

Steam

Auto Clean

———

Self-cleaning programme. Cleans the interior of your washing machine and thus

helps to avoid smells or deposits. Run this programme regularly if you never or

seldom wash your laundry at temperatures over 60°C or if your washing machine

has not been in use for a long time.

IMPORTANT: Do not load any laundry!

During this programme “St” appears on the display.

————— —— — —

❉

——

Delicates

20 - 40 °C

1.5

Curtains and delicate clothing, dresses skirts, shirts and blouses.

❉

Yes

❉❉❉

—— — —

❉❉

1000

Wool

20 - 40 °C

1.0

Only woollens, labelled with the Woolmark and identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark Company

for machine washable wool.

—

Yes

❉

—

❉

—— — —

❉❉

1000

Handwash /

Lingerie

20 - 40 °C

1.0

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

Up to a temperature of 30°C, this programme is particularly suitable to treat

delicate lingerie (use of a laundry net strongly recommended).

This programme (40°C) is tested and approved by The Woolmark Company

for handwashable wool.

—

Yes

❉

—

❉

—— — —

❉❉

400

Rinse & Spin

——

7.0

Same as the last rinse and the final spin in the “Cotton” programme.

——

❉

—

❉❉

—— —

❉❉

max.

Spin

——

7.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

programme.

————— —— — —

❉❉

max.

Drain

———

Drain only - no spinning. Alternative method of terminating programme after

“Rinse Hold”.

————— —— — —

❉

——

A. “Door open” indication

This washing machine is equipped with

automatic safety functions which

detect and diagnose faults at an early

stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

E. Programme selector

F. “Start” button

G. “Spin” button

H. Programme sequence indicator

I. “Reset” button

J. “Start delay” button

K. “Temperature” button

L. Display

}

40105458GB.fm Page 1 Friday, June 27, 2008 10:29 AM

Black process 45.0° 100.0 LPI

5019 401 05458

Add detergent as indicated on the front page and as

described in the chapter “Detergent and Additives” in

your Instructions for Use.

1. Turn the

programme selector

to the desired

programme. The display shows the programme duration

in hours and minutes as well as the predefined

temperature. The lamp of the

“Start”

button blinks.

2. The

temperature

can be altered by pressing the

“Temperature” button .

3. The indication lamp of the predefined

spin speed

lights up; in case you want to set another spin speed,

press the “Spin” button .

Push the button(s) of any option(s) desired - the respective

indication lights up.

When the combination of programme and additional option(s) is

not possible, the indication lights switch off automatically.

Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by

approximately 15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and

prevent colours from changing.

• This option is particularly recommended for the

programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning

to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to

soak for too long.

Note:

The programme stops to “Rinse hold” at the

time the “Rinse hold” light in the programme sequence

indicator is on. The light of the

“Start”

button

blinks.

Terminate the “Rinse hold” option :

• Press the

“Start”

button ; the programme will

terminate automatically with the final spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector to the “Drain” programme and

press the

“Start”

button .

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

water, washing baby linen and helping people with allergies.

“Eco” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption is achieved.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during

rinse. The water is drained out only.

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

White Cotton / Hygienic + 95 7.0 74

2.10 2:10

Coloured Cotton 60 7.0 69 1.33 2:10

Coloured Cotton with “Eco”

***

60 7.0 54 1.19 2:20

Coloured Cotton 40 7.0 69 0.75 2:05

SuperEco 60 7.0 69 0.84 4:00

Synthetics 60 3.0 46

0.80 1:35

Synthetics 40 3.0 42 0.40 1:20

Daily load 40 4.0 48 0.50 1:00

Quick wash 30 4.0 48 0.25 0:30

Steam Refresh — 1.0 1 0.20 0:10

Steam Auto Clean — — 10 0.50 0:35

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.55 0:45

Handwash 40 1.0 45 0.55 0:40

Handwash / Lingerie 30 1.0 45 0.45 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home

may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions

applicable at that time.

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***

Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

“Steam Sanitization” button

• Eliminates bacteria and helps sanitizing the laundry.

• Appropriate for cotton and/or synthetic laundry items

with care label within temperature range of 40 to

60°C and up to a maximum load of 3.0 kg synthetics or

6.0 kg cotton laundry.

• Prolongs the programme by approx. half an hour to an

hour, depending on the load size.

• If you select this option, “St” appears on the display during

the steam phase.

“Steam Stain Removal” button

• Treats the laundry with hot steam during the wash

cycle in order to help removing stains.

• Selectable for laundry made of cotton and/or

synthetics within temperature range of 40 to 60°C.

• If you select this option, “St” appears on the display

during the steam phase.

• On some stains it may be necessary to additionally

select “Prewash” option to support stain removal.

The “Start delay” allows to run the machine at the

consumer’s convenience, for example at night when

electricity is cheaper. Do not use liquid detergent when

activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time

from 1 to 23 hours;

• Press the

“Start”

button . The indication light of

the “Start delay” button blinks and the countdown of

the delay time begins. The light of the “Start delay”

button and the dot between hours and minutes on the

display will keep blinking until the programme starts.

• The time delay indication disappears when the

programme starts and it is replaced by the remaining

programme time.

• Once having pressed the

“Start”

button , the

number of hours preselected can be reduced by pressing

and holding the “Start delay” button. From 1 hour on, the

delay time can also be reduced by minutes.

To cancel the “Start delay”

..before you press the “Start” button :

• Turn the programme selector to another position or

press the

“Reset”

button .

..after having pressed the “Start” button :

• Press the

“Reset”

button for at least 3 seconds -

the start delay time disappears from the display.

Open the tap and press the

“Start”

button . The light

over the

“Start”

button is on. The programme

sequence indicator shows the current programme phase,

running from left to right through Wash, Rinse, Spin/Drain.

The display shows the remaining programme time. Due to

variations in load and temperature of inlet water, the remaining

time is newly calculated in certain programme phases. If this is

the case,

an animation appears on the display

Before starting and after end of a programme, the lamp

lights to show that the door can be opened. As long as a

wash programme is running, the door remains locked and

must on no account be forced open. In case you have an

urgent need to open it during a running programme, refer

to “Cancel (Reset) a running programme before the end”.

“Service”

Lighting up of the “Service” indication can be caused by a

fault in an electrical component. Refer to the

“Troubleshooting Guide” in your Instructions for Use; if

the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open

the water tap; if the indication still lights up, refer to the

“Troubleshooting Guide” in your Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain

hose is kinked or the filter must be cleaned; in the latter case

refer to the Instructions for Use (“Removing the Filter”).

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the

“Start”

button to pause the

programme. The light blinks.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the

“Start”

button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

The

“Reset”

button cancels a programme before the end.

• Press the

“Reset”

button for at least 3 seconds;

“rES” appears on the display. Any existing water is

drained out before the door can be opened. Caution!

The washing might still be hot.

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATION

RED INDICATIONS

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105458GB.fm Page 2 Friday, June 27, 2008 10:29 AM

Black process 45.0° 100.0 LPI

Bauknecht WAK 7518 S Program Chart

Bauknecht WAK 7518 S Program Chart

Bauknecht WAK 7518 S Program Chart

Related papers

Other documents