Hedstrom 2IN1 SWING User manual

Brand: Hedstrom

Model: 2IN1 SWING

Type: User manual

This manual is also suitable for

2 IN 1 SWING M08835

TODDLER SEAT (X1)

Do not modify this item.

Conforms to EN71

Made in China to European Standards

04/2017 ISSUE 1

U - BAR (X1)

Before use please check all bolts are tight, secure and intact.

ASSEMBLY INSTRUCTION FOR TODDLER SWING

TODDLER SWING FOR CHILDREN 6 MONTHS TO 36 MONTHS

PLEASE RETAIN UNUSED SWING COMPONENTS FOR ASSEMBLY OF JUNIOR SWING

STEP 1 Frame & Swing Seat Assembly

M6 BOLT 58mm (X4)

Remember to attach the

rope / swing bearing to

the U bolt

4 4

F1 F1

F5 F5

M8 U BOLT (x2)

M6 BOLT 35mm (x4)

STEP 2 Frame & Swing Assembly

Note: If the soil is hard enough, it may not be necessary to

concrete the ground pegs of the baby swing. If the pegs are

concreted, additional ground pegs (not provided) will be

required for the single swing.

Note: Additional ground pegs can be requested from MV

customer sevices.

STEP 3

ANCHORING SWING TO GROUND

STEP 1

SEAT ASSEMBLY

5 5

Remember to attach therope / swing bearing to the U bolt

Hedstrom 2IN1 SWING User manual

Brand: Hedstrom

Model: 2IN1 SWING

Type: User manual

This manual is also suitable for

Download PDF

report

Hedstrom 2IN1 SWING User manual

This manual is also suitable for

Hedstrom 2IN1 SWING User manual

Related papers

Other documents