ETPI 5740 PRODUCT DESCRIPTION SHEET
DE AT GB IE FR NL BE ES PT IT GR PL
5019 419 61511/B
DIMENSIONS OF THE HOB (mm)
1. Warming zone
2. Touch control for Warming zone
“ON/OFF”
3. Rear left round induction cooking
zone Ø 210 mm,
4. Front left round induction
cooking zone Ø 145 mm,
5. Rear right round induction
cooking zone Ø 145 mm,
6. Front right round induction
cooking zone Ø 180 mm,
7. Touch control for induction heaters
operation
Type PLEIL 230 V~/400 V 3 N~ 50 Hz 6.9 kW
Type PLEIL 230 V ~50Hz 6.9 Kw (only for UK)
HOW TO USE YOUR HOB
Warming zone control
Press the button “A” to switch on the hob. Press one of the buttons of section “B”
corresponding to the cooking zone you intend to use. Select the cooking power required with
+/- buttons of section “C” (number 9 on display corresponds to maximum temperature and 1
to the minimum). You can disable the heater by pressing simultaneously the + and - symbols.
In order to prevent children from use or to clean the glass ceramic surface, you can lock all the
functions by pressing the key symbol “D”.
Booster
: The rear left heater is provided with a booster to reach quickly the maximum
temperature level. Once level 9 is reached, press again on + to activate the booster. A red LED
and a P will appear on the display.
Timer
: A timer can be used to any selected burner. You first need to select the heater on which
you want the timer to operate and then, by pressing the button “E”, you can activate the timer
and with + and - set the cooking time. When the cooking time is terminated, the timer turns
off the heater and disactivates the selection. A buzzer operates for 30 seconds to indicate the
end of the timer operation.
Warming zone
: The warming zone is useful to keep food warm and it's operated by an
electronic touch control. Press the button “F” to activate the system and a red LED will turn
on. Soon afterwards, within 5 seconds, press button “G”. A red LED will turn on and the first
LED will turn off. As long as the red LED above symbol “G” is on, the heater remains ON.
To turn OFF the heater, press the button “H”.
Important:
To avoid permanently damaging the glass-ceramic top, do not use:
- Pots with bottoms that are not perfectly flat.
- Metal pots with enamelled bottom
.
A-
On/Off
F-
Warming zone Key
B-
Cooking zone selection
G-
Warming zone ON
C-
Power selection
H-
Warming zone Off
D-
Key symbol
E-
Timer
/