Whirlpool TDLR 60110 Program Chart

Brand: Whirlpool

Model: TDLR 60110

Category: Washing machines

Type: Program Chart

Whirlpool TDLR 60110 is a washing machine equipped with automatic safety functions that detect and diagnose faults early, ensuring a smooth laundry experience. It offers various programs tailored to different fabric types and levels of dirt, including Cotton, Synthetics, Delicates, Mixed, Colours, Wool, and Rinse & Spin. Additionally, special options like Rapid, Prewash, Intensive rinse, and Spin allow for customization of the wash cycle. The machine also features a "Fresh care" option to keep laundry fresh if it cannot be unloaded immediately after the program ends.

EN PROGRAMME CHART

Whirlpool is a registered trademark of Whirlpool USA. W10822764

Programme

Care

Labels

Max.

Load

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

Detergents and Additives Special options

Max.

Spin

Speed

rpm

Pre-

wash

Main

Wash

Softener Colours

15°

Kolorowe

15°

Fresh

care

Fresh

Care

Start

delay

Opóźnienie

startu

Rapid

Szybkie

Prewash

Pranie

wstępne

Favourite

Ulubione

Intensive

rinse

Super

płukanie

Spin

Wiro-

wanie

Cotton

30 - 40 - 60 - 95°C

Bawełniane

30 - 40 - 60 - 95°C

6.0

Normally to heavily soiled bed linen, table linen and underwear,

towels, shirts etc. made of cotton and linen.

Selecting “Cotton 95°, this programme eliminates bacteria, ensuring

sanitization of your laundry. The bacterial removal efficiency has been

tested following a similar methodology to the NF EN 13697 standard

of Nov. 2001

Yes

i i i i i i i i i

max.

Synthetics

40 - 60°C

Syntetyczne

40 - 60°C

3.0

Normally soiled blouses, shirts, overalls etc. made of polyester

(Diolen, Trevira), polyamide (Perlon, Nylon).

Yes

i i i i i i i i i

max.

Delicates

30°C

Delikatne

30°C

1.5

Curtains and delicate clothing , dresses, skirts, shirts and blouses.

Yes

i i i i

–

i i

–

max.

Mixed

40°C

Mieszane

40°C

3.0

Slightly to normally soiled textiles made of cotton and/or synthetics.

– Yes

i i i i

– –

i i i

max.

Cotton

Bawełna

6.0

Normally soiled cotton laundry.

At 40°C and 60°C standard cotton programme and most favourable

programme in terms of combined water and energy consumption for

washing cotton laundry.

- Reference programme for the Energy Label.

– Yes

–

i i

– –

i i i

max.

Colours

40°C

Kolory

40°C

4.0

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry.

Use heavy duty detergent, if necessary also stain removers or bleaches

on oxygen basis. Do not use liquid detergent.

Yes

i i i i i i i i i

max.

Wool

Cold

Wełniane

zimna

1.0

Woollens, labelled with the Woolmark and identified as machine

washable, as well as textiles made of silk (keep to care label!),

linen, wool and viscose marked as handwashable.

– Yes

i i i i

– –

–

max.

Rinse & Spin

Płukanie i

wirowanie

– 6.0

Same as the last rinse and the final spin in the “Cotton” programme.

– –

–

i i

– –

i i i

max.

Spin

Wirowanie

– 6.0

In this programme spinning is intensive. Same as the spin cycle in the

“Cotton” programme.

– – – –

i i

– –

–

max.

Yes = dosing required / i = optional.

D E F

A. Programme selector

B. “Start/Pause” button

C. “Reset/Drain” button

D. “Start delay” button

E. “Favourite” button

F. Child lock button combination

G. “Spin” button

H. Time display

I. Programme sequence indicator

J. “Lid open” indication

This washing machine is equipped with

automatic safety functions which detect and

diagnose faults at an early stage and react

appropriately:

K. “Service” indication

L. “Water tap closed” indication

M. “Clean filter” indication

Acustic noise level :

Washing - 59dB(A) / 1 pW

Spinning - 1000 rpm, 76 dB(A) / 1 pW

CONSUMPTION DATA

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect

to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the

default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Standard Cotton programme and basis for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

*** After programme and spinning with maximum selectable spin speed, in default programme setting.

Power consumption in off-mode 0.11 W / in left-on mode 0.11 W

- the sensor technology adapts water, energy and programme duration to your wash load.

Programme

Tempe-

rature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

without “Rapid”

Approx. Programme Duration

(hrs : min)

Approx. remaining

moisture content (%)***

without “Rapid” with “Rapid”

1000 rpm

Cotton 95 6.0 53* 1.91 2:05 1:55

Cotton 60 6.0 48 1.14 2:30 1:45

Cotton 40 6.0 61 0.97 3:00 1:30

Cotton 30 6.0 61 0.52 3:00 1:30

Synthetics 60 3.0 50* 0.90 2:05 1:14

Synthetics 40 3.0 40 0.52 1:50 0:59

Delicates 30 1.5 50 0.50 0:45 –

Mixed 40 3.0 40 0.45 1:00 – 68

Colours 40 4.0 59 0.40 1:20 1:00

Wool cold 1.0 40 0.40 0:35 -

eCotton **

60 6.0 46 0.90 4:00 –

eCotton **

60 3.0 32 0.78 2:10 –

eCotton **

40 3.0 32 0.60 2:00 –

PREPARATION OF THE WASH CYCLE

Load the machine, close the drum doors and check that

they are properly locked.

2. Add detergent and eventual additives as described on

the front page and in your Instructions for Use.

3. Close the lid.

4. Turn the programme selector to the desired

programme and temperature. The time display shows

the duration of the chosen programme (in hours and

minutes), and the lamp next to the “Start/Pause”

button flashes. The indication lamp of the predefined

spin speed lights up. If you do not start the programe

soon after having made your choice, the washing

machine will switch off automatically after about a

quarter of an hour. Switch on the washing machine again

by turning the programe selector back to “O” and then

to the desired programe.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective

indication lights up. When the combination of programme

and additional option(s) is not possible, the indication lights

switch off automatically. Unsuitable combinations of options

are deselected automatically.

“Colours 15°” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured

laundry.

• Recommendable for lightly soiled laundry without stains.

• Make sure that your detergent is suitable for cold wash

temperatures.

• Not selectable for Cotton 95°C.

“Fresh care” button

• Select this option if you cannot unload the laundry

soon after programme end, or if you tend to forget the

laundry in your washing machine. It will help to keep

your laundry fresh.

• The washing machine will start to tumble the laundry

periodically after programme end.

• The light of the “Fresh care” button will blink while

this function is active, and the display will show an

animation.

• The periodic tumbling will last up to approximately

6 hours after the end of your wash programme, and

you can stop it at any time by pressing the “Fresh care”

button. It will last a while until you can open the door.

• After the “Fresh care” period has run out, the display

indicates “End”.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for small loads or only lightly soiled

laundry.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular

dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helping people with

allergies.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during the

rinse. The water is drained out only.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently,

the appliance offers the possibility to save one setting for

each programme so that it can be used again by just pushing

one button.

• Select the desired programme, temperature, spin speed

and option(s), push and hold the “Favourites” button

for at least 3 seconds. The lamp next to “Favourites”

shortly flashes and then lights up - the programme

settings is saved.

Next time you want to use your individual programme

settings, select the programme, push the “Favourites”

button and start by pushing “Start/Pause”.

If you want to replace the saved programme setting

by another one:

• Select programme temperature, spin speed and options

as desired and then press and hold the “Favourites”

button for at least 3 seconds.The previously saved

programme setting will be replaced by the new one.

START DELAY

The “Start delay” button allows the user to run the machine

at his convenience, for example at night when electricity is

cheaper.

• Do not use liquid detergent when activating this

function.

• Select programme, spin speed and options.

• Press the “Start delay” button several times to select a

delay time by 1 to 24 hours.

• Start the programme (see “Programme Start”). The

indication lamp over the “Start delay” button lights up

and goes off when the programme starts.

• Once having pressed the “Start/Pause” button,

the countdown of the time delay begins. The time

delay indication on the display disappears when the

programme starts and is replaced by the remaining time.

• After the “Start/Pause” button has been pressed,

the number of hours preselected can be reduced by

pressing again the “Start delay” button.

To cancel the “Start delay”

..before you press the “Start/Pause” button:

• Turn the programme selector to another position or

press the “Reset/Drain” button.

..after having pressed the “Start/Pause” button:

• Press the “Reset/Drain” button for at least 3 second.

The start delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The

indication lamp next to the “Start/Pause” button lights up.

The display shows the remaining programme time.

Due to variations in load and temperature of inlet

water, the remaining time is newly calculated in certain

programme phases. If this is the case, an animation

appears on the time display.

“LID OPEN” INDICATION

Before starting and after end of a programme, the lamp

lights to show the the lid can be opened. As long as a wash

programme is running, the lid remains locked and must

on no account be forced open. In case you have an urgent

need to open it during a running programme, refer to

“Cancel a running programme before the end”.

CHILD LOCK BUTTONS

You can lock the buttons of the control panel against

improper use (e.g. by children).

• Press both of the child lock buttons simultaneously and

hold them for at least 3 seconds. The key symbol on the

display lights up.

• To unlock the buttons again: proceed in the same way.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”:

No or not sufficient inlet water.

“Service”:

Failure or malfunction of an electrical component.

“Clean pump”:

Waste water is not pumped out.

Spin speed on display blinks: unbalance during spinning

•

PROGRAMME END

The “Lid open” indicator lights up, and the display

shows “End”. After about a quarter of an hour, the

washing machine will switch off completely to save

energy.

1. Turn the programme selector to the “O” position.

2. Close the water tap.

3. Open the lid and drum and unload the machine.

4. Leave the lid open for some time to allow the interior of

the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

Press the “Start/Pause” button to pause the

programme. The light blinks.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add

detergent for this programme.

CANCEL A RUNNING PROGRAMME

BEFORE THE END

The “Reset/Drain” button cancels a programme before

the end.

• Press the “Reset/Drain” button for at least 3 seconds.

Any existing water is drained out before the door can

be opened.

Whirlpool TDLR 60110 Program Chart

Brand: Whirlpool

Model: TDLR 60110

Category: Washing machines

Type: Program Chart

Download PDF

report

Whirlpool TDLR 60110 Program Chart

Whirlpool TDLR 60110 Program Chart

Related papers

Other documents