FC-22464 Fountain Assembly

Place the fountain on a level surface away from areas where it could get clogged with

leaves or debris. Also, make sure that the cord will reach your electrical outlet. Next, follow

these steps to assemble the fountain. Use the illustration below for reference.

Step (1). Connect plastic hose to pump.

Step (2). Fill the fountain with enough clean water to ensure the pump is fully submerged. Plug in the pump to a

standard outdoor electrical outlet. Next water will start to flow.

discretion within the one-year warranty period. Before we can help, you will need to provide proof of purchase with

the date of purchase and photos of the defective merchandise. We will use the photos to determine the cause of

defect and for future quality control.