Cambridge Casual HQ-61690 Installation guide

Type
Installation guide
White Oak 3PC Bar Height Bistro Set
HQ-61690
A. Table top
B1. Right side frame
QTY: 1pc QTY: 1pc
B2. Left side frame
C. Cross-bar
H. 2 " Bolt I. 1 1/4" Bolt
QTY: 1pc
J. Allen key
QTY: 2pcs QTY: 4pcs
K. Wooden Cap
QTY: 4pcs
1
QTY: 1pc QTY: 1pc
2
D1. Right side frame
D2. Left side frame
QTY: 1pc QTY: 1pc
E. Back support
F. Seat
G1. Front cross-bar
QTY: 1pc QTY: 1pc
H. 2 " Bolt
QTY: 1pc
J. Allen key
QTY: 10pcs
K. Wooden Cap
QTY: 10pcs
QTY: 1pc QTY: 1pc
G2. Back cross-bar
THE TABLE IS NOW READY FOR USE.
H
J
STEP 1 STEP 2
STEP 3 STEP 4
I
J
H
J
J
I
K
K
3
A
B1
C
B2
Put the Table top (A) face down on clear flat surface.
Attach the right side frame (B1) into table top (A),
and secure with 2" bolts (H) as shown.
Tighten the bolts using Allen key (J).
Attach the cross-bar (C) into right side frame (B1),
and secure with 1 1/4" bolt (I).
Tighten the bolts using Allen key (J).
Attach the left side frame (A2) into
assembly and secure with 2" bolts (H)
and 1 1/4" bolt (I) as shown.
Tighten the bolts using Allen key (F).
Make sure all parts are correctly connected and
tighten all bolts completely using Allen key.
Tapping in the wooden caps (K) to cover bolts
head using rubber mallet.
STEP 1 STEP 2
STEP 3 STEP 4
4
H
J
D2
E
F
G1
G2
H
J
D1
THE CHAIR IS NOW READY FOR USE.
K
K
Attach the back support (E), seat (F),
front cross-bar (G1) and back cross-bar
(G2) into left side frame (D2).
Secure with 2" bolts (H) as shown.
Tighten the bolts using Allen key (J).
Attach the right side frame (D1) into
pre-assembling frame.Secure with 2" bolts (H)
as shown. Tighten the bolts using Allen key (J).
Make sure all parts are correctly connected and
tighten all bolts completely using Allen key.
Tapping in the wooden caps (K) to cover bolts
head using rubber mallet.
UP
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Cambridge Casual HQ-61690 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI