THE TABLE IS NOW READY FOR USE.
H
J
STEP 1 STEP 2
STEP 3 STEP 4
I
J
H
J
J
I
K
K
3
A
B1
C
B2
Put the Table top (A) face down on clear flat surface.
Attach the right side frame (B1) into table top (A),
and secure with 2" bolts (H) as shown.
Tighten the bolts using Allen key (J).
Attach the cross-bar (C) into right side frame (B1),
and secure with 1 1/4" bolt (I).
Tighten the bolts using Allen key (J).
Attach the left side frame (A2) into
assembly and secure with 2" bolts (H)
and 1 1/4" bolt (I) as shown.
Tighten the bolts using Allen key (F).
Make sure all parts are correctly connected and
tighten all bolts completely using Allen key.
Tapping in the wooden caps (K) to cover bolts
head using rubber mallet.