Dimplex C3P18C9-2030W Operating instructions

Brand: Dimplex

Model: C3P18C9-2030W

Type: Operating instructions

Operating Instructions

C3P18C9-2030W

7215940100R00

www.c3furnishings.com

! NOTE: The heater on

your fireplace may emit a

slight, harmless odor when

first used. This odor is a

normal condition caused

by initial heating of internal

heater parts and will not

occur again.

CUTOFF SWITCH

! NOTE: There is a safety

temperature cutoff switch

(cutout) inside the heater.

If the heater overheats,

the cutout will shut off the

supply power.

It can be reset by

unplugging the unit and

waiting 5 minutes before

plugging the unit back on.

CAUTION: If you need

to continuously reset the

heater, unplug the unit and

call technical service at

1-888-346-7539.

The fireplace

is manually

controlled by two

switches located

in the upper right

corner.

Flame ON/OFF

The Flame ON/OFF switch

turns the flame and ember

bed ON and OFF.

Set the switch to “I” to turn

the flame and ember bed ON.

Set to “O” to turn the flame

and ember bed OFF.

Heater ON/OFF

The Heater ON/OFF switch

supplies power to the heater

fan and the heating element.

When the heater is switched

ON, the heater fan and

element will operate and the

switch light will turn ON.

Dimplex C3P18C9-2030W Operating instructions

Dimplex C3P18C9-2030W Operating instructions

Dimplex C3P18C9-2030W Operating instructions

Related papers

Other documents