Stone & Beam ALT0316097 User manual

ASSEMBLY INSTRUCTION

ASIN NO. : B07374K537

In order to ensure safety and maximize the lifetime of the lamp, please

make sure to read the following instructions thoroughly before assembly.

Assembly Instructions:

CAUTION: To avoid possible electrical shock be sure power supply is turned off

before wiring. Risk of Fire-This product must be installed in accordance

with the applicable installation code by a person familiar with the

construction and operation of the product and the hazards involved.

1. Unpack all parts from carton carefully.

2. Screw all KD parts and make it tightly.

3. Assemble the Mounting plate (B) by using Screw (D) and wire the Building and the Flush Ceiling with

Wire Nut(C) in Junction box (A)(L-Live wire,N-Neutral wire,E-Earth wire).

4. Push Canopy (E) and assemble it with Mounting plate (B) by using Screw (F).

5. Insert the Lamp Shade Gap(H) in the body rod(I) on the Flush Washer(J) under Rotating-Metal-Cycle(G),

and fix Shade(L) by using Rotation-Metal-Cycle(G) with Clockwise rotation.

6. Insert Light Blub (K) into Socket.

7. Assembly is completed.

WAR N I N G:

1. Use Type B Bulb 5W maximum (Bulb not included)

2. Do not use polishes or cleaners on your lamp.

Simply wipe clean with a soft cloth.

Made in China