2. Highwood
  3. AD-CRT48-BKE
AD-CRT48-BKE

Highwood AD-CRT48-BKE Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Highwood AD-CRT48-BKE Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 1
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Round Table
Assembly Guide
1) Step 1: Attach Leg Section 1 to Leg Section 2 with (2) "A" Bolts.
AD-LEGC2 / AD-LEGD2
03.05.19
A
B
C
1/4-20 X 3"
1/4-20 X 2"
A
X8
X4
X1
2) Step 2: Attach Leg Section 2 to Leg Section 3 with (2) "A" Bolts.
3) Step 3: Attach Leg Section 3 to Leg Section 4 with (2) "A" Bolts.
4) Step 4: Attach Leg Section 4 to Leg Section 1 with (2) "A" Bolts.
NOTE: All 4 Leg Sections are Identical and Numbered for Order of Assembly Only.
LEG SECTION 2
LEG SECTION 3
LEG SECTION 4
LEG SECTION 1
NOTE: DO NOT Tighten Bolts Until Table is Fully Assembled.
A
A
A
A
A
A
A
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Round Table
Assembly Guide
6) Step 6: Turn the Table Upright
on a Flat Surface.
5) Step 5: Attach Leg Sections to Table Top
with (4) "B" Bolts.
7) Step 7: Tighten all (4) "B" Bolts.
8) Step 8: Tighten all (8) "A" Bolts.
9) Step 9: Install Umbrella Grommet "C"
in the Top of the Table.
C
B
B
B
B
LEG SECTIONS
TABLE TOP
AD-LEGC2 / AD-LEGD2
03.05.19
/