IMPORTANT NOTES:
If the unit fails to operate, or operates incorrectly, the following
steps should be performed:
• Check batteries to ensure proper installation. If the unit still
does not work correctly after the batteries are reconnected,
replace all the batteries.
TECNICAL TIPS:
1. Remove batteries when transporting or during long-term
storage to preserve battery life.
2. Only use "AA" Alkaline batteries.
3. Avoid inserting objects into the air vents which may cause
damage to the fan propeller.
4. Long hair should be tied back so as not to entangle into the fan
assembly through the air vents.
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
Air Flow Tube #3060
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
The Air Flow Tube is an easy-to-use and durable solution to
providing many hours of sensory stimulation. The device activates
simply by tilting the tube to a vertical position. The Air Flow Tube
is constructed of shatter proof plastics and vinyl, and is designed to
withstand the impact of occasionally being dropped on the floor.
OPERATING INSTRUCTIONS:
1. Remove the vinyl end cap furthest from the air holes by
grasping the tube and the end cap and pulling apart.
(1)
2. Expose the battery compartment on the fan assembly by pulling
on the black tab. You only need to pull the fan assembly out
half way to expose the battery case.
(2)
Install batteries:
Remove the screw from the battery case. Using your thumbs,
carefully slide the cover off the battery compartment. Observing
proper polarity, install 2 AA alkaline batteries. Reinstall battery
compartment cover. Please Note: The fan will activate if the
tube is tilted in a vertical position. Keep the tube assembly
horizontal to avoid the fan from activating. The fan should only
be activated when the fan assembly is fully inserted into the
tube.
3. Using the palm of your hand, slowly press the fan assembly
back into the tube so the end is flush with the end of the yellow
rim of the tube.
(3)
4. Replace the vinyl end cap. Your Air Tube will now blow a
soothing breeze when tilted in a vertical position!
(4)
Rev 5/1/17
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Kozyheat Slayton 42 Owner's manual
-
Samsung AR12HV5NBWKNMD User manual
-
-
Samsung AR24KSFSFWKYPM User manual
-
-
Samsung AR18JVSSCWK User manual
-
-
-
-
kozy heat Dassel Owner's manual