Legrand 2000 Series Plugmold Steel Multioutlet System Surge Module Replacement, AL2000 Series Aluminum Plugmold Multioutlet System Surge Module Replacement, NM2000 Series Nonmetallic Plugmold Multioutlet System Surge Module Replacement, Surge Module Replacement Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Legrand 2000 Series Plugmold Steel Multioutlet System Surge Module Replacement Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PLEASE READ INSTRUCTIONS THOROUGHLY
BEFORE REPLACING MODULE.
1
2
3
5
4
4a
6
6a
Discard entire module.
Plug in new module and fasten screw.
Grip module at screw end and
pull straight out of Plugmold.
If cover of module is pulled off, then gently grip
the printed circuit board and pull straight out.
Remove Screw.
CAUTION: TURN OFF POWER
© Copyright 1999 The Wiremold Company All Rights Reserved. 41862 1199
-SAFETY ALERT-
If you have any questions, please contact
Shawn Stempinski at 800-338-1315 x3807 or
/