2. Air Vent
  3. 84215

Air Vent 84215, 84228, EV16624BR, FOV164G, FOV166G, FOV168G Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Air Vent 84215 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FACE ON VENTS
INSTALLATION GUIDELINES
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to
check with your local building inspector or building permit office for approvals and possible variations that may apply.
CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
Face On Vents – Used where surface mount venting is needed or to cover openings where original installed vents have
deteriorated. These vents are ideal for use where traditional framing members (studs) are 16 in. on center.
2x4
Stud
2x4
Stud
©©
16 in.
Opening measurements must be at least 1 inch smaller than the vent size.
Remove old vent, if necessary, and clean any loose debris from the opening.
Apply a bead of sealant around inside
of vent ange.
Fasten vent with nails or screws.
1
2 3
/